Beginning experiment # 2

Experiment title: "Inelastic neutron scattering from something"

Users: "M. Lumsden, L. Robertson, M. Yethiraj"

Local Contact: "All of us"

Setting sample name to "Test crystal".

Setting sample type to single crystal.

Setting sample mosaic to 30.000 min.

Setting next scan number to 1

Initializing preset/counting configuration:

Preset counting mode is set to normal.

Setting the default preset channel to "time".

Setting the default preset value to 0.000.

Setting the default counting channel to "detector".

The UB matrix was successfully generated using:
Scattering plane specified by:
 h1=1.000  k1=1.000  l1=0.000     h2=0.000  k2=0.000  l2=1.000
the single peak position:
h=1.0000  k=1.0000  l=0.0000     s2=32.1199     s1=16.0600     sgl=0.0000     sgu=0.0000  Ei=14.7000  Ef=14.7000

and the following lattice parameters:
a=5.5500  b=6.6600  c=7.7700     alpha=90.0000  beta=90.0000  gamma=90.0000

Results of the new UB matrix:
Peak position as input:
           h            k            l           s2           s1          sgl          sgu           Ei           Ef
      1.0000       1.0000       0.0000      32.1199      16.0600       0.0000       0.0000      14.7000      14.7000

Calculated angle positions using original h,k,l,Ei,Ef:
           h            k            l           Ei           Ef           s2           s1          sgl          sgu           m2           a2
      1.0000       1.0000       0.0000      14.7000      14.7000      32.1199      16.0600       0.0000       0.0000     -43.0590     -41.1662     -41.1662

Calculated h,k,l positions using original angles:
           h            k            l           s2           s1          sgl          sgu           Ei           Ef
      1.0000       1.0000       0.0000      32.1199      16.0600       0.0000       0.0000      14.7000      14.7000


Setting instrument plus-minus configuration to   -   +   -


Initial Spectrometer configuration:
The monochromator is PG002 with a d-spacing of 3.355 Angstroms.

The monochromator is Pg002 with a d-spacing of 3.355 Angstroms.

Collimation:  48-40-40-120

The spectrometer is configured to have a fixed incident energy of 14.7000 meV.


11:21:00 AM  4/28/2006    Executing "drive h 1 k 1 l 1 e 0"

Driving to the following position: "h 1 k 1 l 1 e 0"

Destination Motor Positions:
motor        position
m2      -41.16623
a2      -41.16623
a1      159.41688
s2      36.78871
s1      -10.36052
sgl      0.00000
sgu      0.00000
mfocus      -43.05904

Drive completed.


11:21:38 AM  4/28/2006    Executing "drive s1 @(s1)+1"
                          Derived from "driverel s1 1"

Driving to the following position: "s1 -10.360925+1"

Destination Motor Positions:
motor        position
s1      -9.36092

Drive completed.


11:22:08 AM  4/28/2006    Executing "ubcalc file "C:\spice\spice_code_lv_80\Support_Files\User\User_TAS\exp2\UBConf\tmp\UB28Apr2006_112201AM.ini""

Setting the UB matrix using the configuration file "C:\spice\spice_code_lv_80\Support_Files\User\User_TAS\exp2\UBConf\tmp\UB28Apr2006_112201AM.ini".

The UB matrix was successfully generated using:
Scattering plane specified by:
 h1=1.000  k1=1.000  l1=0.000     h2=0.000  k2=0.000  l2=1.000
the single peak position:
h=1.0000  k=1.0000  l=1.0000     s2=36.7881     s1=-9.3614     sgl=0.0004     sgu=-0.0003  Ei=14.6994  Ef=14.6989

and the following lattice parameters:
a=5.5500  b=6.6600  c=7.7700     alpha=90.0000  beta=90.0000  gamma=90.0000

Results of the new UB matrix:
Peak position as input:
           h            k            l           s2           s1          sgl          sgu           Ei           Ef
      1.0000       1.0000       1.0000      36.7881      -9.3614       0.0004      -0.0003      14.6994      14.6989

Calculated angle positions using original h,k,l,Ei,Ef:
           h            k            l           Ei           Ef           s2           s1          sgl          sgu           m2           a2
      1.0000       1.0000       1.0000      14.6994      14.6989      36.7898      -9.3605       0.0004      -0.0003     -43.0584     -41.1671     -41.1679

Calculated h,k,l positions using original angles:
           h            k            l           s2           s1          sgl          sgu           Ei           Ef
      1.0000       1.0000       1.0000      36.7881      -9.3614       0.0004      -0.0003      14.6994      14.6989


The orientation information has been stored in the file 'C:\spice\spice_code_lv_80\Support_Files\User\User_TAS\exp2\UBConf\UB28Apr2006_112208AM.ini'.
To restore the configuration to this state at a later time, type:
ubcalc file=C:\spice\spice_code_lv_80\Support_Files\User\User_TAS\exp2\UBConf\UB28Apr2006_112208AM.ini


11:23:25 AM  4/28/2006    Executing "drive h 1 k 1 l 1 e 0"

Driving to the following position: "h 1 k 1 l 1 e 0"

Destination Motor Positions:
motor        position
m2      -41.16623
a2      -41.16623
a1      159.41688
s2      36.78871
s1      -9.36254
sgl      0.00041
sgu      -0.00035
mfocus      -43.05904

Drive completed.


11:25:03 AM  4/28/2006    Executing "drive h 1.000000 k 1.000000 l 1.000000 e 0.000000"
                          Derived from "br 1 1 1"

Driving to the following position: "h 1.000000 k 1.000000 l 1.000000 e 0.000000"

Destination Motor Positions:
motor        position
m2      -41.16623
a2      -41.16623
a1      159.41688
s2      36.78871
s1      -9.36254
sgl      0.00041
sgu      -0.00035
mfocus      -43.05904

Drive completed.


11:26:16 AM  4/28/2006    Executing "drive h 1.000000 k 1.000000 l 1.000000 e 0.000000"
                          Derived from "br 1 1 1"

Driving to the following position: "h 1.000000 k 1.000000 l 1.000000 e 0.000000"

Destination Motor Positions:
motor        position
m2      -41.16623
a2      -41.16623
a1      159.41688
s2      36.78871
s1      -9.36254
sgl      0.00041
sgu      -0.00035
mfocus      -43.05904

Drive completed.


11:26:27 AM  4/28/2006    Executing "drive h 2.000000 k 2.000000 l 2.000000 e 0.000000"
                          Derived from "br 2 2 2"

Driving to the following position: "h 2.000000 k 2.000000 l 2.000000 e 0.000000"

Destination Motor Positions:
motor        position
m2      -41.16623
a2      -41.16623
a1      159.41688
s2      78.26429
s1      11.37525
sgl      0.00041
sgu      -0.00035
mfocus      -43.05904

Drive completed.


11:26:36 AM  4/28/2006    Executing "drive h 1.000000 k 1.000000 l 1.000000 e 0.000000"
                          Derived from "br 1 1 1"

Driving to the following position: "h 1.000000 k 1.000000 l 1.000000 e 0.000000"

Destination Motor Positions:
motor        position
m2      -41.16623
a2      -41.16623
a1      159.41688
s2      36.78871
s1      -9.36254
sgl      0.00041
sgu      -0.00035
mfocus      -43.05904

Drive completed.


11:26:53 AM  4/28/2006    Executing "drive h 2.000000 k 2.000000 l 2.000000 e 0.000000"
                          Derived from "br 2 2 2"

Driving to the following position: "h 2.000000 k 2.000000 l 2.000000 e 0.000000"

Destination Motor Positions:
motor        position
m2      -41.16623
a2      -41.16623
a1      159.41688
s2      78.26429
s1      11.37525
sgl      0.00041
sgu      -0.00035
mfocus      -43.05904

Drive completed.


11:27:00 AM  4/28/2006    Executing "drive h 1.000000 k 1.000000 l 1.000000 e 0.000000"
                          Derived from "br 1 1 1"

Driving to the following position: "h 1.000000 k 1.000000 l 1.000000 e 0.000000"

Destination Motor Positions:
motor        position
m2      -41.16623
a2      -41.16623
a1      159.41688
s2      36.78871
s1      -9.36254
sgl      0.00041
sgu      -0.00035
mfocus      -43.05904

Drive completed.


11:28:43 AM  4/28/2006    Executing "drive h 2.000000 k 2.000000 l 2.000000 e 0.000000"
                          Derived from "br 2 2 2"

Driving to the following position: "h 2.000000 k 2.000000 l 2.000000 e 0.000000"

Destination Motor Positions:
motor        position
m2      -41.16623
a2      -41.16623
a1      159.41688
s2      78.26429
s1      11.37525
sgl      0.00041
sgu      -0.00035
mfocus      -43.05904

Drive completed.


11:28:50 AM  4/28/2006    Executing "drive h 1.000000 k 1.000000 l 1.000000 e 0.000000"
                          Derived from "br 1 1 1"

Driving to the following position: "h 1.000000 k 1.000000 l 1.000000 e 0.000000"

Destination Motor Positions:
motor        position
m2      -41.16623
a2      -41.16623
a1      159.41688
s2      36.78871
s1      -9.36254
sgl      0.00041
sgu      -0.00035
mfocus      -43.05904

Drive completed.


11:29:14 AM  4/28/2006    Executing "drive h 2.000000 k 2.000000 l 2.000000 e 0.000000"
                          Derived from "br 2 2 2"

Driving to the following position: "h 2.000000 k 2.000000 l 2.000000 e 0.000000"

Destination Motor Positions:
motor        position
m2      -41.16623
a2      -41.16623
a1      159.41688
s2      78.26429
s1      11.37525
sgl      0.00041
sgu      -0.00035
mfocus      -43.05904

Drive completed.


11:31:50 AM  4/28/2006    Executing "drive h 1.000000 k 1.000000 l 1.000000 e 0.000000"
                          Derived from "br 1 1 1"

Driving to the following position: "h 1.000000 k 1.000000 l 1.000000 e 0.000000"

Destination Motor Positions:
motor        position
m2      -41.16623
a2      -41.16623
a1      159.41688
s2      36.78871
s1      -9.36254
sgl      0.00041
sgu      -0.00035
mfocus      -43.05904

Drive completed.


11:34:56 AM  4/28/2006    Executing "drive h 2.000000 k 2.000000 l 2.000000 e 0.000000"
                          Derived from "br 2 2 2"

Driving to the following position: "h 2.000000 k 2.000000 l 2.000000 e 0.000000"

Destination Motor Positions:
motor        position
m2      -41.16623
a2      -41.16623
a1      159.41688
s2      78.26429
s1      11.37525
sgl      0.00041
sgu      -0.00035
mfocus      -43.05904

Drive completed.


11:35:07 AM  4/28/2006    Executing "drive h 1.000000 k 1.000000 l 1.000000 e 0.000000"
                          Derived from "br 1 1 1"

Driving to the following position: "h 1.000000 k 1.000000 l 1.000000 e 0.000000"

Destination Motor Positions:
motor        position
m2      -41.16623
a2      -41.16623
a1      159.41688
s2      36.78871
s1      -9.36254
sgl      0.00041
sgu      -0.00035
mfocus      -43.05904

Drive completed.


11:37:11 AM  4/28/2006    Executing "drive h 1.000000 k 1.000000 l 1.000000 e 0.000000"
                          Derived from "br 1 1 1; wait 10; comment "Hello""

Driving to the following position: "h 1.000000 k 1.000000 l 1.000000 e 0.000000"

Destination Motor Positions:
motor        position
m2      -41.16623
a2      -41.16623
a1      159.41688
s2      36.78871
s1      -9.36254
sgl      0.00041
sgu      -0.00035
mfocus      -43.05904

Drive completed.


11:37:11 AM  4/28/2006    Executing "wait 10"
                          Derived from "br 1 1 1; wait 10; comment "Hello""

11:37:11 AM  4/28/2006    Waiting for 10.0000 (seconds).

11:37:21 AM  4/28/2006    Wait completed.

11:37:21 AM  4/28/2006    Executing "comment "Hello""
                          Derived from "wait 10.0 : Elapsed=10.0s, Remaining=0.0s"

COMMENT:
Hello


12:07:24 PM  5/5/2006    Executing "ubcalc file "C:\spice\spice_code_lv_80\Support_Files\User\User_TAS\exp1\UBConf\tmp\UB05May2006_120722PM.ini""

Setting the UB matrix using the configuration file "C:\spice\spice_code_lv_80\Support_Files\User\User_TAS\exp1\UBConf\tmp\UB05May2006_120722PM.ini".

The UB matrix was successfully generated using:
Scattering plane specified by:
 h1=1.000  k1=1.000  l1=0.000     h2=0.000  k2=0.000  l2=1.000
the single peak position:
h=1.0000  k=1.0000  l=1.0000     s2=36.7881     s1=-9.3614     sgl=0.0004     sgu=-0.0003  Ei=14.6994  Ef=14.6989

and the following lattice parameters:
a=12.0535  b=8.3917  c=14.3400     alpha=90.0000  beta=97.4700  gamma=90.0000

Results of the new UB matrix:
Peak position as input:
           h            k            l           s2           s1          sgl          sgu           Ei           Ef
      1.0000       1.0000       1.0000      36.7881      -9.3614       0.0004      -0.0003      14.6994      14.6989

Calculated angle positions using original h,k,l,Ei,Ef:
           h            k            l           Ei           Ef           s2           s1          sgl          sgu           m2           a2
      1.0000       1.0000       1.0000      14.6994      14.6989      22.6341     -16.4374       0.0004      -0.0003     -43.0584     -41.1671     -41.1679

Calculated h,k,l positions using original angles:
           h            k            l           s2           s1          sgl          sgu           Ei           Ef
      1.6080       1.6080       1.6080      36.7881      -9.3614       0.0004      -0.0003      14.6994      14.6989


The orientation information has been stored in the file 'C:\spice\spice_code_lv_80\Support_Files\User\User_TAS\exp1\UBConf\UB05May2006_120724PM.ini'.
To restore the configuration to this state at a later time, type:
ubcalc file=C:\spice\spice_code_lv_80\Support_Files\User\User_TAS\exp1\UBConf\UB05May2006_120724PM.ini


12:07:56 PM  5/5/2006    Executing "ei 5.000000"

Setting the incident energy to 5.000meV and the configuration to "Fixed Ei".


12:07:56 PM  5/5/2006    Executing "plusminus - + -"

Setting the instrument configuration to:
1. (monochromator)   -1 +
2.        (sample)    1 +
3.      (analyzer)   -1 -


12:07:56 PM  5/5/2006    Executing "exptitle "Inelastic neutron scattering from something""

Setting the experiment title to:
Inelastic neutron scattering from something


12:07:56 PM  5/5/2006    Executing "collimation 48.000000 40.000000 40.000000 120.000000"

Setting the collimation to:
   source-monochromator:     48.000000
   monochromator-sample:     40.000000
        sample-analyzer:     40.000000
      analyzer-detector:    120.000000

12:07:57 PM  5/5/2006    Executing "monochromator pg002"

Setting the monochromator to PG002 with a d-spacing of 3.3550 Angstroms.

12:07:57 PM  5/5/2006    Executing "analyzer pg002"

Setting the analyzer to Pg002 with a d-spacing of 3.3550 Angstroms.

12:08:36 PM  5/5/2006    Executing "ubcalc file "C:\spice\spice_code_lv_80\Support_Files\User\User_TAS\exp1\UBConf\tmp\UB05May2006_120834PM.ini""

Setting the UB matrix using the configuration file "C:\spice\spice_code_lv_80\Support_Files\User\User_TAS\exp1\UBConf\tmp\UB05May2006_120834PM.ini".

The UB matrix was successfully generated using:
Scattering plane specified by:
 h1=1.000  k1=0.000  l1=0.000     h2=0.000  k2=1.000  l2=1.000
the single peak position:
h=2.0000  k=0.0000  l=0.0000     s2=36.7881     s1=-9.3614     sgl=0.0004     sgu=-0.0003  Ei=14.6994  Ef=14.6989

and the following lattice parameters:
a=12.0535  b=8.3917  c=14.3400     alpha=90.0000  beta=97.4700  gamma=90.0000

Results of the new UB matrix:
Peak position as input:
           h            k            l           s2           s1          sgl          sgu           Ei           Ef
      2.0000       0.0000       0.0000      36.7881      -9.3614       0.0004      -0.0003      14.6994      14.6989

Calculated angle positions using original h,k,l,Ei,Ef:
           h            k            l           Ei           Ef           s2           s1          sgl          sgu           m2           a2
      2.0000       0.0000       0.0000      14.6994      14.6989      22.7690     -16.3699       0.0004      -0.0003     -43.0584     -41.1671     -41.1679

Calculated h,k,l positions using original angles:
           h            k            l           s2           s1          sgl          sgu           Ei           Ef
      3.1972       0.0000       0.0000      36.7881      -9.3614       0.0004      -0.0003      14.6994      14.6989


The orientation information has been stored in the file 'C:\spice\spice_code_lv_80\Support_Files\User\User_TAS\exp1\UBConf\UB05May2006_120836PM.ini'.
To restore the configuration to this state at a later time, type:
ubcalc file=C:\spice\spice_code_lv_80\Support_Files\User\User_TAS\exp1\UBConf\UB05May2006_120836PM.ini


12:28:45 PM  5/5/2006    Executing "ubcalc file "C:\spice\spice_code_lv_80\Support_Files\User\User_TAS\exp1\UBConf\tmp\UB05May2006_122843PM.ini""

Setting the UB matrix using the configuration file "C:\spice\spice_code_lv_80\Support_Files\User\User_TAS\exp1\UBConf\tmp\UB05May2006_122843PM.ini".

The UB matrix was successfully generated using:
Scattering plane specified by:
 h1=1.000  k1=0.000  l1=0.000     h2=0.000  k2=1.000  l2=1.000
the single peak position:
h=2.0000  k=0.0000  l=0.0000     s2=36.7881     s1=-9.3614     sgl=0.0004     sgu=-0.0003  Ei=14.6994  Ef=14.6989

and the following lattice parameters:
a=12.0535  b=8.3917  c=14.3400     alpha=90.0000  beta=99.0000  gamma=90.0000

Results of the new UB matrix:
Peak position as input:
           h            k            l           s2           s1          sgl          sgu           Ei           Ef
      2.0000       0.0000       0.0000      36.7881      -9.3614       0.0004      -0.0003      14.6994      14.6989

Calculated angle positions using original h,k,l,Ei,Ef:
           h            k            l           Ei           Ef           s2           s1          sgl          sgu           m2           a2
      2.0000       0.0000       0.0000      14.6994      14.6989      22.8584     -16.3252       0.0004      -0.0003     -43.0584     -41.1671     -41.1679

Calculated h,k,l positions using original angles:
           h            k            l           s2           s1          sgl          sgu           Ei           Ef
      3.1849       0.0000       0.0000      36.7881      -9.3614       0.0004      -0.0003      14.6994      14.6989


The orientation information has been stored in the file 'C:\spice\spice_code_lv_80\Support_Files\User\User_TAS\exp1\UBConf\UB05May2006_122845PM.ini'.
To restore the configuration to this state at a later time, type:
ubcalc file=C:\spice\spice_code_lv_80\Support_Files\User\User_TAS\exp1\UBConf\UB05May2006_122845PM.ini


12:29:06 PM  5/5/2006    Executing "ubcalc file "C:\spice\spice_code_lv_80\Support_Files\User\User_TAS\exp1\UBConf\tmp\UB05May2006_122905PM.ini""

Setting the UB matrix using the configuration file "C:\spice\spice_code_lv_80\Support_Files\User\User_TAS\exp1\UBConf\tmp\UB05May2006_122905PM.ini".

The UB matrix was successfully generated using:
Scattering plane specified by:
 h1=1.000  k1=0.000  l1=0.000     h2=0.000  k2=1.000  l2=1.000
the single peak position:
h=2.0000  k=0.0000  l=0.0000     s2=36.7881     s1=-9.3614     sgl=0.0004     sgu=-0.0003  Ei=14.6994  Ef=14.6989

and the following lattice parameters:
a=12.0535  b=8.3917  c=14.3400     alpha=90.0000  beta=97.0000  gamma=90.0000

Results of the new UB matrix:
Peak position as input:
           h            k            l           s2           s1          sgl          sgu           Ei           Ef
      2.0000       0.0000       0.0000      36.7881      -9.3614       0.0004      -0.0003      14.6994      14.6989

Calculated angle positions using original h,k,l,Ei,Ef:
           h            k            l           Ei           Ef           s2           s1          sgl          sgu           m2           a2
      2.0000       0.0000       0.0000      14.6994      14.6989      22.7450     -16.3819       0.0004      -0.0004     -43.0584     -41.1671     -41.1679

Calculated h,k,l positions using original angles:
           h            k            l           s2           s1          sgl          sgu           Ei           Ef
      3.2005       0.0000       0.0000      36.7881      -9.3614       0.0004      -0.0003      14.6994      14.6989


The orientation information has been stored in the file 'C:\spice\spice_code_lv_80\Support_Files\User\User_TAS\exp1\UBConf\UB05May2006_122906PM.ini'.
To restore the configuration to this state at a later time, type:
ubcalc file=C:\spice\spice_code_lv_80\Support_Files\User\User_TAS\exp1\UBConf\UB05May2006_122906PM.ini


12:38:14 PM  5/5/2006    Executing "ubcalc file "C:\spice\spice_code_lv_80\Support_Files\User\User_TAS\exp1\UBConf\tmp\UB05May2006_123805PM.ini""

Setting the UB matrix using the configuration file "C:\spice\spice_code_lv_80\Support_Files\User\User_TAS\exp1\UBConf\tmp\UB05May2006_123805PM.ini".

The UB matrix was successfully generated using:
Scattering plane specified by:
 h1=1.000  k1=0.000  l1=0.000     h2=0.000  k2=1.000  l2=1.000
the single peak position:
h=2.0000  k=0.0000  l=0.0000     s2=36.7881     s1=-9.3614     sgl=0.0004     sgu=-0.0003  Ei=14.6994  Ef=14.6989

and the following lattice parameters:
a=11.9730  b=8.6260  c=14.3400     alpha=90.0000  beta=97.4700  gamma=90.0000

Results of the new UB matrix:
Peak position as input:
           h            k            l           s2           s1          sgl          sgu           Ei           Ef
      2.0000       0.0000       0.0000      36.7881      -9.3614       0.0004      -0.0003      14.6994      14.6989

Calculated angle positions using original h,k,l,Ei,Ef:
           h            k            l           Ei           Ef           s2           s1          sgl          sgu           m2           a2
      2.0000       0.0000       0.0000      14.6994      14.6989      22.9242     -16.2924       0.0004      -0.0003     -43.0584     -41.1671     -41.1679

Calculated h,k,l positions using original angles:
           h            k            l           s2           s1          sgl          sgu           Ei           Ef
      3.1758       0.0000       0.0000      36.7881      -9.3614       0.0004      -0.0003      14.6994      14.6989


The orientation information has been stored in the file 'C:\spice\spice_code_lv_80\Support_Files\User\User_TAS\exp1\UBConf\UB05May2006_123814PM.ini'.
To restore the configuration to this state at a later time, type:
ubcalc file=C:\spice\spice_code_lv_80\Support_Files\User\User_TAS\exp1\UBConf\UB05May2006_123814PM.ini


1:23:22 PM  5/5/2006    Executing "ubcalc file "C:\spice\spice_code_lv_80\Support_Files\User\User_TAS\exp1\UBConf\tmp\UB05May2006_12320PM.ini""

Setting the UB matrix using the configuration file "C:\spice\spice_code_lv_80\Support_Files\User\User_TAS\exp1\UBConf\tmp\UB05May2006_12320PM.ini".

The UB matrix was successfully generated using:
Scattering plane specified by:
 h1=1.000  k1=0.000  l1=0.000     h2=0.000  k2=1.000  l2=0.000
the single peak position:
h=2.0000  k=0.0000  l=0.0000     s2=36.7881     s1=-9.3614     sgl=0.0004     sgu=-0.0003  Ei=14.6994  Ef=14.6989

and the following lattice parameters:
a=11.9730  b=8.6260  c=14.3400     alpha=90.0000  beta=97.4700  gamma=90.0000

Results of the new UB matrix:
Peak position as input:
           h            k            l           s2           s1          sgl          sgu           Ei           Ef
      2.0000       0.0000       0.0000      36.7881      -9.3614       0.0004      -0.0003      14.6994      14.6989

Calculated angle positions using original h,k,l,Ei,Ef:
           h            k            l           Ei           Ef           s2           s1          sgl          sgu           m2           a2
      2.0000       0.0000       0.0000      14.6994      14.6989      22.9242     -16.2924       0.0004      -0.0003     -43.0584     -41.1671     -41.1679

Calculated h,k,l positions using original angles:
           h            k            l           s2           s1          sgl          sgu           Ei           Ef
      3.1758       0.0000       0.0000      36.7881      -9.3614       0.0004      -0.0003      14.6994      14.6989


The orientation information has been stored in the file 'C:\spice\spice_code_lv_80\Support_Files\User\User_TAS\exp1\UBConf\UB05May2006_12322PM.ini'.
To restore the configuration to this state at a later time, type:
ubcalc file=C:\spice\spice_code_lv_80\Support_Files\User\User_TAS\exp1\UBConf\UB05May2006_12322PM.ini

5:22:10 PM  5/12/2006    Executing "zero s1 @(s1.zero)+@(s1)-5"
                         Derived from "setpos s1 5"
Error processing: zero s1 @(s1.zero)+@(s1)-5
Error in opening the global file "C:\spice\spice_code_lv_801\motor_globals.vi".

2:37:28 PM  8/22/2006    Executing "initialize"
Reinitializing experiment ...  Completed initialization.
2:50:25 PM  8/22/2006    Executing "initialize"
Reinitializing experiment ...  Completed initialization.
12:15:11 PM  8/23/2006    Executing "drive s1 10"
Driving to the following position: "s1 10"
Destination Motor Positions:
motor        position
s1      10.00000
Drive completed.

12:15:18 PM  8/23/2006    Executing "drive s1 10 rand1"
ERROR in drive command: The "drive" command must have an even number of arguments: 
drive motor1 value1 motor2 value2 .....Move aborted.

12:15:28 PM  8/23/2006    Executing "drive s1 rand1"
Driving to the following position: "s1 rand1"
Destination Motor Positions:
motor        position
s1      -15.00000
Drive completed.

12:15:38 PM  8/23/2006    Executing "drive s1 rand1"
Driving to the following position: "s1 rand1"
Destination Motor Positions:
motor        position
s1      -15.00000
Drive completed.

12:16:25 PM  8/23/2006    Executing "drive s1 rand1"
Driving to the following position: "s1 rand1"
Destination Motor Positions:
motor        position
s1      -15.00000
Drive completed.

12:25:56 PM  8/23/2006    Executing "drive s1 rand1"
Driving to the following position: "s1 rand1"
Destination Motor Positions:
motor        position
s1      -15.00000
### Maximum number of attempted drives exceeded for motor s1
Drive completed.

12:26:43 PM  8/23/2006    Executing "drive s1 rand1"
Driving to the following position: "s1 rand1"
Destination Motor Positions:
motor        position
s1      -15.00000
Drive aborted!!
Final Motor Positions:
motor        position
s1      -5.00000

Abort issued!!
12:29:19 PM  8/23/2006    Executing "drive s1 rand1"
Driving to the following position: "s1 rand1"
Destination Motor Positions:
motor        position
s1      -15.00000
Drive completed.

4:12:01 PM  8/23/2006    Executing "drive s1 rand1"
Driving to the following position: "s1 rand1"
Destination Motor Positions:
motor        position
s1      -15.00000
Drive completed.

4:12:26 PM  8/23/2006    Executing "drive s1 rand1"
Driving to the following position: "s1 rand1"
Destination Motor Positions:
motor        position
s1      -15.00000
Drive completed.

4:13:04 PM  8/23/2006    Executing "drive s1 rand1"
Driving to the following position: "s1 rand1"
Destination Motor Positions:
motor        position
s1      -15.00000
Drive completed.

4:13:31 PM  8/23/2006    Executing "drive s1 rand1"
Driving to the following position: "s1 rand1"
Destination Motor Positions:
motor        position
s1      -15.00000
Drive completed.

4:14:11 PM  8/23/2006    Executing "drive s1 rand1"
Driving to the following position: "s1 rand1"
Destination Motor Positions:
motor        position
s1      -15.00000
Drive completed.

4:16:03 PM  8/23/2006    Executing "drive s1 rand1"
Driving to the following position: "s1 rand1"
Destination Motor Positions:
motor        position
s1      -15.00000
Drive completed.

4:16:08 PM  8/23/2006    Executing "drive s1 rand1"
Driving to the following position: "s1 rand1"
Destination Motor Positions:
motor        position
s1      -15.00000
Drive completed.

4:16:20 PM  8/23/2006    Executing "drive s1 rand1"
Driving to the following position: "s1 rand1"
Destination Motor Positions:
motor        position
s1      -15.00000
Drive completed.

4:16:25 PM  8/23/2006    Executing "drive s1 rand1"
Driving to the following position: "s1 rand1"
Destination Motor Positions:
motor        position
s1      -15.00000
Drive completed.

4:16:29 PM  8/23/2006    Executing "drive s1 rand1"
Driving to the following position: "s1 rand1"
Destination Motor Positions:
motor        position
s1      -15.00000
Drive completed.

4:17:25 PM  8/23/2006    Executing "drive s1 rand1"
Driving to the following position: "s1 rand1"
Destination Motor Positions:
motor        position
s1      -15.00000
Drive completed.

4:18:03 PM  8/23/2006    Executing "drive s1 rand1"
Driving to the following position: "s1 rand1"
Destination Motor Positions:
motor        position
s1      -15.00000
Drive completed.

4:18:10 PM  8/23/2006    Executing "drive s1 rand1"
Driving to the following position: "s1 rand1"
Destination Motor Positions:
motor        position
s1      -15.00000
Drive completed.

4:18:22 PM  8/23/2006    Executing "drive s1 rand1"
Driving to the following position: "s1 rand1"
Destination Motor Positions:
motor        position
s1      -15.00000
Drive completed.

4:19:01 PM  8/23/2006    Executing "drive s1 rand1"
Driving to the following position: "s1 rand1"
Destination Motor Positions:
motor        position
s1      -15.00000
Drive completed.

4:19:18 PM  8/23/2006    Executing "drive s1 rand2"
Driving to the following position: "s1 rand2"
Destination Motor Positions:
motor        position
s1      -15.00000
Drive completed.

4:19:38 PM  8/23/2006    Executing "drive s1 rand2 rand1"
ERROR in drive command: Wed, Aug 23, 2006 [4:19:38 PM] : SPICE Error in Common.lvlib:Common_Commands.lvlib:PrepareProgramsDriveScan.vi. : There are multiple arguments given for the motor s1 and one of these arguments is a "Program Name".  
A program name cannot be used in this manner.
..Move aborted.

4:21:29 PM  8/23/2006    Executing "drive s1 rand1"
Driving to the following position: "s1 rand1"
Destination Motor Positions:
motor        position
s1      -15.00000
Drive completed.

4:21:42 PM  8/23/2006    Executing "drive s1 rand2"
Driving to the following position: "s1 rand2"
Destination Motor Positions:
motor        position
s1      -15.00000
Drive completed.

4:22:30 PM  8/23/2006    Executing "drive s1 rand2 rand1"
ERROR in drive command: Wed, Aug 23, 2006 [4:22:30 PM] : SPICE Error in Common.lvlib:Common_Commands.lvlib:PrepareProgramsDriveScan.vi. : There are multiple arguments given for the motor s1 and one of these arguments is a "Program Name".  
A program name cannot be used in this manner.
..Move aborted.

4:24:44 PM  8/23/2006    Executing "scan s2 20 30 1 s1 rand1 preset time 0.5"

# scan = 1
# date = 8/23/2006
# time = 4:24:44 PM
# experiment = Inelastic neutron scattering from something
# experiment_number = 1
# command = scan s2 20 30 1 s1 rand1 preset time 0.5
# builtin_command = scan s2 20 30 1 s1 rand1 preset time 0.5
# users = M. Lumsden, L. Robertson, M. Yethiraj
# local_contact = All of us
# scan_title = 
# monochromator = PG002
# analyzer = Pg002
# sense = -+-
# collimation = 48-40-40-120
# samplename = Test crystal
# sampletype = crystal
# samplemosaic = 30.000000
# latticeconstants = 11.973000,8.626000,14.340000,90.000000,97.470000,90.000000
# ubmatrix = -0.074543,0.053990,-0.008092,-0.039231,-0.102589,-0.004259,-0.000001,-0.000000,0.069735
# mode = 0
# plane_normal = -0.000007,-0.000006,1.000000
# ubconf = 
# preset_type = normal 
# preset_channel = time
# preset_value = 0.500000
# def_x = s2
# def_y = detector
# col_headers = 
#   Pt.         s2         s1       time    monitor   detector focal_length         m1         m2     mfocus        sgl        sgu        stl        stu         a1         a2          q          h          k          l         ei         ef          e
      1    19.9999   -14.9986      0.500   2663.000    119.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     0.9250     1.7457    -0.0613     0.0000    14.6991    14.7007    -0.001
      2    21.0015   -14.9981      0.500   2794.000    108.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     0.9708     1.8328    -0.0527     0.0000    14.6991    14.7007    -0.001
      3    21.9997   -15.0004      0.500   2506.000    113.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     1.0164     1.9195    -0.0430     0.0000    14.6991    14.7007    -0.001
      4    22.9997   -14.9980      0.500   2565.000    102.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     1.0620     2.0061    -0.0322     0.0000    14.6991    14.7007    -0.001
      5    23.9982   -15.0005      0.500   2516.000    101.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     1.1075     2.0922    -0.0203     0.0000    14.6991    14.7007    -0.001
      6    24.9964   -15.0003      0.500   2610.000    103.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     1.1528     2.1781    -0.0073    -0.0000    14.6991    14.7007    -0.001
      7    26.0004   -15.0000      0.500   2614.000     98.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     1.1983     2.2641     0.0068    -0.0000    14.6991    14.7007    -0.001
      8    27.0023   -14.9991      0.500   2476.000     91.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     1.2437     2.3496     0.0220    -0.0000    14.6991    14.7007    -0.001
      9    28.0025   -15.0012      0.500   2502.000     83.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     1.2888     2.4345     0.0383    -0.0000    14.6991    14.7007    -0.001
     10    29.0016   -15.0004      0.500   2539.000    101.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     1.3338     2.5190     0.0555    -0.0000    14.6991    14.7007    -0.001
     11    29.9971   -14.9988      0.500   2681.000    101.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     1.3786     2.6027     0.0738    -0.0000    14.6991    14.7007    -0.001
# Sum of Counts = 1120
# Center of Mass = 24.791837+/-1.052024
# Full Width Half-Maximum = 6.417195+/-0.664871
# 4:25:17 PM  8/23/2006   scan completed.
4:26:01 PM  8/23/2006    Executing "drive s1 rand2 s2 40"
Driving to the following position: "s1 rand2 s2 40"
Destination Motor Positions:
motor        position
s1      -15.00000
s2      40.00000
Drive completed.

4:52:08 PM  8/23/2006    Executing "scan s2 20 30 1 s1 rand1 preset time 0.5"

# scan = 2
# date = 8/23/2006
# time = 4:52:09 PM
# experiment = Inelastic neutron scattering from something
# experiment_number = 1
# command = scan s2 20 30 1 s1 rand1 preset time 0.5
# builtin_command = scan s2 20 30 1 s1 rand1 preset time 0.5
# users = M. Lumsden, L. Robertson, M. Yethiraj
# local_contact = All of us
# scan_title = 
# monochromator = PG002
# analyzer = Pg002
# sense = -+-
# collimation = 48-40-40-120
# samplename = Test crystal
# sampletype = crystal
# samplemosaic = 30.000000
# latticeconstants = 11.973000,8.626000,14.340000,90.000000,97.470000,90.000000
# ubmatrix = -0.074543,0.053990,-0.008092,-0.039231,-0.102589,-0.004259,-0.000001,-0.000000,0.069735
# mode = 0
# plane_normal = -0.000007,-0.000006,1.000000
# ubconf = 
# preset_type = normal 
# preset_channel = time
# preset_value = 0.500000
# def_x = s2
# def_y = detector
# col_headers = 
#   Pt.         s2         s1       time    monitor   detector focal_length         m1         m2     mfocus        sgl        sgu        stl        stu         a1         a2          q          h          k          l         ei         ef          e
      1    20.0017   -14.9999      0.500   2580.000     99.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     0.9251     1.7458    -0.0613     0.0000    14.6991    14.7007    -0.001
      2    20.9990   -15.0008      0.500   2511.000    112.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     0.9707     1.8326    -0.0527     0.0000    14.6991    14.7007    -0.001
      3    21.9980   -14.9994      0.500   2595.000     92.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     1.0163     1.9193    -0.0430     0.0000    14.6991    14.7007    -0.001
      4    23.0050   -15.0000      0.500   2527.000    100.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     1.0623     2.0065    -0.0321     0.0000    14.6991    14.7007    -0.001
      5    23.9991   -15.0003      0.500   2624.000    102.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     1.1075     2.0923    -0.0203     0.0000    14.6991    14.7007    -0.001
      6    24.9959   -15.0008      0.500   2596.000    103.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     1.1528     2.1780    -0.0073    -0.0000    14.6991    14.7007    -0.001
      7    25.9970   -14.9994      0.500   2625.000    109.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     1.1982     2.2638     0.0067    -0.0000    14.6991    14.7007    -0.001
      8    27.0036   -14.9989      0.500   2680.000    108.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     1.2437     2.3497     0.0220    -0.0000    14.6991    14.7007    -0.001
      9    28.0018   -15.0007      0.500   2584.000     96.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     1.2888     2.4345     0.0382    -0.0000    14.6991    14.7007    -0.001
     10    28.9981   -14.9985      0.500   2656.000    110.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     1.3337     2.5187     0.0554    -0.0000    14.6991    14.7007    -0.001
     11    30.0005   -15.0002      0.500   2592.000    109.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     1.3787     2.6030     0.0739    -0.0000    14.6991    14.7007    -0.001
# Sum of Counts = 1140
# Center of Mass = 25.067490+/-1.054160
# Full Width Half-Maximum = 6.347020+/-0.658035
# 4:52:43 PM  8/23/2006   scan completed.
10:08:17 PM  8/23/2006    Executing "drive s1 rand2 s2 40"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      -15.00000
s2      40.00000
Drive completed.

10:08:41 PM  8/23/2006    Executing "scan s2 20 30 1 s1 rand1 preset time 0.5"

# scan = 3
# date = 8/23/2006
# time = 10:08:41 PM
# experiment = Inelastic neutron scattering from something
# experiment_number = 1
# command = scan s2 20 30 1 s1 rand1 preset time 0.5
# builtin_command = scan s2 20 30 1 s1 rand1 preset time 0.5
# users = M. Lumsden, L. Robertson, M. Yethiraj
# local_contact = All of us
# scan_title = 
# monochromator = PG002
# analyzer = Pg002
# sense = -+-
# collimation = 48-40-40-120
# samplename = Test crystal
# sampletype = crystal
# samplemosaic = 30.000000
# latticeconstants = 11.973000,8.626000,14.340000,90.000000,97.470000,90.000000
# ubmatrix = -0.074543,0.053990,-0.008092,-0.039231,-0.102589,-0.004259,-0.000001,-0.000000,0.069735
# mode = 0
# plane_normal = -0.000007,-0.000006,1.000000
# ubconf = 
# preset_type = normal 
# preset_channel = time
# preset_value = 0.500000
# def_x = s2
# def_y = detector
# col_headers = 
#   Pt.         s2         s1       time    monitor   detector focal_length         m1         m2     mfocus        sgl        sgu        stl        stu         a1         a2          q          h          k          l         ei         ef          e
      1    20.0020    49.5888      0.500   2582.000     96.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     0.9251     0.6730    -1.1721     0.0000    14.6991    14.7007    -0.001
      2    20.9978    58.5072      0.500   2725.000     89.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     0.9707     0.4507    -1.2917     0.0000    14.6991    14.7007    -0.001
      3    21.9977  -100.2381      0.500   2762.000    121.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     1.0163     0.2183     1.3862    -0.0000    14.6991    14.7007    -0.001
      4    22.9968   162.1617      0.500   2690.000    119.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     1.0619    -2.0056    -0.0400     0.0000    14.6991    14.7007    -0.001
      5    23.9999    51.5780      0.500   2534.000    110.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     1.1075     0.8061    -1.4032     0.0000    14.6991    14.7007    -0.001
      6    24.9990  -181.9279      0.500   2641.000    115.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     1.1529    -2.1196     0.3651     0.0000    14.6991    14.7007    -0.001
      7    26.0003  -130.7701      0.500   2540.000     90.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     1.1983    -0.9927     1.4786     0.0000    14.6991    14.7007    -0.001
      8    26.9968   -60.5801      0.500   2703.000    107.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     1.2434     1.6226     1.2344    -0.0000    14.6991    14.7007    -0.001
      9    27.9974   -37.1249      0.500   2783.000     95.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     1.2886     2.2351     0.7015    -0.0000    14.6991    14.7007    -0.001
     10    28.9988   111.1054      0.500   2679.000    109.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     1.3337    -1.4225    -1.5114     0.0000    14.6991    14.7007    -0.001
     11    29.9971  -151.4864      0.500   2615.000    107.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     1.3786    -1.9575     1.2486     0.0000    14.6991    14.7007    -0.001
# Sum of Counts = 1158
# Center of Mass = 25.009678+/-1.043408
# Full Width Half-Maximum = 6.243978+/-0.642657
# 10:09:40 PM  8/23/2006   scan completed.
10:10:15 PM  8/23/2006    Executing "scan s2 20 30 1 s1 rand1 s1 rand2 preset time 0.5"

# scan = 4
# date = 8/23/2006
# time = 10:10:15 PM
# experiment = Inelastic neutron scattering from something
# experiment_number = 1
# command = scan s2 20 30 1 s1 rand1 s1 rand2 preset time 0.5
# builtin_command = scan s2 20 30 1 s1 rand1 s1 rand2 preset time 0.5
# users = M. Lumsden, L. Robertson, M. Yethiraj
# local_contact = All of us
# scan_title = 
# monochromator = PG002
# analyzer = Pg002
# sense = -+-
# collimation = 48-40-40-120
# samplename = Test crystal
# sampletype = crystal
# samplemosaic = 30.000000
# latticeconstants = 11.973000,8.626000,14.340000,90.000000,97.470000,90.000000
# ubmatrix = -0.074543,0.053990,-0.008092,-0.039231,-0.102589,-0.004259,-0.000001,-0.000000,0.069735
# mode = 0
# plane_normal = -0.000007,-0.000006,1.000000
# ubconf = 
# preset_type = normal 
# preset_channel = time
# preset_value = 0.500000
# def_x = s2
# def_y = detector
# col_headers = 
#   Pt.         s2         s1         s1       time    monitor   detector focal_length         m1         m2     mfocus        sgl        sgu        stl        stu         a1         a2          q          h          k          l         ei         ef          e
      1    19.9993    39.9148    39.9148      0.500   2572.000    108.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     0.9250     0.9344    -1.0732     0.0000    14.6991    14.7007    -0.001
      2    21.0023    98.5229    98.5229      0.500   2472.000    110.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     0.9709    -0.7980    -1.2001     0.0000    14.6991    14.7007    -0.001
      3    22.0027   114.3202   114.3202      0.500   2566.000     98.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     1.0166    -1.2622    -1.0519     0.0000    14.6991    14.7007    -0.001
      4    23.0000   120.9111   120.9111      0.500   2662.000    114.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     1.0620    -1.4717    -0.9911     0.0000    14.6991    14.7007    -0.001
      5    23.9991   169.1606   169.1606      0.500   2775.000     91.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     1.1075    -2.0848     0.1305     0.0000    14.6991    14.7007    -0.001
      6    25.0002    12.7336    12.7336      0.500   2488.000    101.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     1.1530     1.9235    -0.7431     0.0000    14.6991    14.7007    -0.001
      7    25.9950  -143.5266  -143.5266      0.500   2649.000     98.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     1.1981    -1.4172     1.2826     0.0000    14.6991    14.7007    -0.001
      8    26.9997   -28.0305   -28.0305      0.500   2775.000     86.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     1.2435     2.2820     0.4063    -0.0000    14.6991    14.7007    -0.001
      9    27.9983    83.1375    83.1375      0.000      0.000      0.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     1.2886    -0.2926    -1.7563     0.0000    14.6991    14.7007    -0.001
# Sum of Counts = 806
# Center of Mass = 23.358393+/-1.166310
# Full Width Half-Maximum = 4.541051+/-0.830720
# 10:10:51 PM  8/23/2006   scan stopped!!
Abort issued!!
10:12:54 PM  8/23/2006    Executing "drive s1 rand2 s2 40"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      -15.00000
s2      40.00000
Drive completed.

10:13:12 PM  8/23/2006    Executing "drive s1 home"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      10.50000
Drive completed.

10:55:09 AM  8/31/2006    Executing "scan s2 20 30 1 s1 rand1 preset time 0.5"

# scan = 5
# date = 8/31/2006
# time = 10:55:09 AM
# experiment = Inelastic neutron scattering from something
# experiment_number = 1
# command = scan s2 20 30 1 s1 rand1  preset time 0.5
# builtin_command = scan s2 20 30 1 s1 rand1 preset time 0.5
# users = M. Lumsden, L. Robertson, M. Yethiraj
# local_contact = All of us
# scan_title = 
# monochromator = PG002
# analyzer = Pg002
# sense = -+-
# collimation = 48-40-40-120
# samplename = Test crystal
# sampletype = crystal
# samplemosaic = 30.000000
# latticeconstants = 11.973000,8.626000,14.340000,90.000000,97.470000,90.000000
# ubmatrix = -0.074543,0.053990,-0.008092,-0.039231,-0.102589,-0.004259,-0.000001,-0.000000,0.069735
# mode = 0
# plane_normal = -0.000007,-0.000006,1.000000
# ubconf = 
# preset_type = normal 
# preset_channel = time
# preset_value = 0.500000
# def_x = s2
# def_y = detector
# col_headers = 
#   Pt.         s2         s1       time    monitor   detector focal_length         m1         m2     mfocus        sgl        sgu        stl        stu         a1         a2          q          h          k          l         ei         ef          e
      1    19.9993     8.2865      0.000      0.000      0.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     0.9250     1.5701    -0.5577     0.0000    14.6991    14.7007    -0.001
# Sum of Counts = 0
# Center of Mass = NaN+/-NaN
# Full Width Half-Maximum = NaN+/-NaN
# 10:55:42 AM  8/31/2006   scan stopped!!
Abort issued!!
10:55:49 AM  8/31/2006    Executing "drive s1 home"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      10.50000
Drive completed.

10:55:53 AM  8/31/2006    Executing "drive s1 rand2 s2 40"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      -15.00000
s2      40.00000
Drive aborted!!
Final Motor Positions:
motor        position
s1      -13.71919
s2      39.99823

Abort issued!!
10:56:44 AM  8/31/2006    Executing "initialize"
                          Derived from "init"
Reinitializing experiment ...  Completed initialization.
10:56:54 AM  8/31/2006    Executing "drive s1 rand2"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      -15.00000
Drive aborted!!
Final Motor Positions:
motor        position
s1      -199.38523

Abort issued!!
10:58:29 AM  8/31/2006    Executing "drive s1 rand2"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      -15.00000
Drive completed.

10:58:45 AM  8/31/2006    Executing "scan s2 20 30 1 s1 rand1 preset time 0.5"

# scan = 6
# date = 8/31/2006
# time = 10:58:45 AM
# experiment = Inelastic neutron scattering from something
# experiment_number = 1
# command = scan s2 20 30 1 s1 rand1  preset time 0.5
# builtin_command = scan s2 20 30 1 s1 rand1 preset time 0.5
# users = M. Lumsden, L. Robertson, M. Yethiraj
# local_contact = All of us
# scan_title = 
# monochromator = PG002
# analyzer = Pg002
# sense = -+-
# collimation = 48-40-40-120
# samplename = Test crystal
# sampletype = crystal
# samplemosaic = 30.000000
# latticeconstants = 11.973000,8.626000,14.340000,90.000000,97.470000,90.000000
# ubmatrix = -0.074543,0.053990,-0.008092,-0.039231,-0.102589,-0.004259,-0.000001,-0.000000,0.069735
# mode = 0
# plane_normal = -0.000007,-0.000006,1.000000
# ubconf = 
# preset_type = normal 
# preset_channel = time
# preset_value = 0.500000
# def_x = s2
# def_y = detector
# col_headers = 
#   Pt.         s2         s1       time    monitor   detector focal_length         m1         m2     mfocus        sgl        sgu        stl        stu         a1         a2          q          h          k          l         ei         ef          e
      1    20.0019   -60.9294      0.500   2566.000    116.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     0.9251     1.2749     0.8688    -0.0000    14.6991    14.7007    -0.001
      2    21.0002  -180.1749      0.500   2697.000    119.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     0.9708    -1.7532     0.3917     0.0000    14.6991    14.7007    -0.001
      3    21.9988    81.3340      0.500   2586.000     79.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     1.0164    -0.2706    -1.3814     0.0000    14.6991    14.7007    -0.001
      4    23.0017  -158.1096      0.500   2533.000     95.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     1.0621    -1.5780     0.9008     0.0000    14.6991    14.7007    -0.001
      5    24.0010  -139.4539      0.500   2772.000    120.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     1.1076    -1.1608     1.2652     0.0000    14.6991    14.7007    -0.001
      6    25.0006     4.9965      0.500   2705.000    129.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     1.1530     2.0437    -0.5481     0.0000    14.6991    14.7007    -0.001
      7    25.9980    93.0271      0.500   2524.000     90.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     1.1982    -0.6918    -1.5663     0.0000    14.6991    14.7007    -0.001
      8    27.0002   -30.6019      0.500   2404.000    129.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     1.2436     2.2547     0.4803    -0.0000    14.6991    14.7007    -0.001
      9    27.9994    19.3046      0.500   2539.000    115.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     1.2887     2.0404    -0.9653     0.0000    14.6991    14.7007    -0.001
     10    29.0016  -206.2402      0.500   2610.000     88.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     1.3338    -2.4558    -0.4112     0.0000    14.6991    14.7007    -0.001
     11    30.0010   -70.6683      0.500   2718.000    104.000    66.6730   120.5002   -41.1676   -43.1159     0.0005    -0.0007     0.0000     0.0001   159.4163   -41.1652     1.3788     1.3841     1.6036    -0.0000    14.6991    14.7007    -0.001
# Sum of Counts = 1184
# Center of Mass = 24.968353+/-1.030238
# Full Width Half-Maximum = 6.276727+/-0.640333
# 10:59:46 AM  8/31/2006   scan completed.
11:35:35 AM  8/31/2006    Executing "drive s1 rand2"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      -15.00000
Drive aborted!!
Final Motor Positions:
motor        position
s1      -70.66832

Abort issued!!
11:37:15 AM  8/31/2006    Executing "drive s1 rand2"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      -15.00000
Drive aborted!!
Final Motor Positions:
motor        position
s1      136.16294

Abort issued!!
11:41:10 AM  8/31/2006    Executing "drive s1 rand2"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      -15.00000
Drive aborted!!
Final Motor Positions:
motor        position
s1      -25.11302

Abort issued!!
11:51:58 AM  8/31/2006    Executing "drive s1 rand2"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      -15.00000
Drive aborted!!
Final Motor Positions:
motor        position
s1      49.74880

Abort issued!!
11:53:33 AM  8/31/2006    Executing "drive s1 rand2"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      -15.00000
Drive aborted!!
Final Motor Positions:
motor        position
s1      -33.33968

Abort issued!!
11:55:43 AM  8/31/2006    Executing "drive s1 rand2"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      -15.00000
Drive aborted!!
Final Motor Positions:
motor        position
s1      84.30059

Abort issued!!
11:57:47 AM  8/31/2006    Executing "drive s1 rand2"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      -15.00000
Drive aborted!!
Final Motor Positions:
motor        position
s1      152.81869

Abort issued!!
11:58:37 AM  8/31/2006    Executing "drive s1 rand2"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      -15.00000
Drive aborted!!
Final Motor Positions:
motor        position
s1      88.14338

Abort issued!!
12:00:12 PM  8/31/2006    Executing "drive s1 rand2"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      -15.00000
Drive aborted!!
Final Motor Positions:
motor        position
s1      -34.81098

Abort issued!!
12:01:40 PM  8/31/2006    Executing "drive s1 rand2"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      -15.00000
Drive aborted!!
Final Motor Positions:
motor        position
s1      141.94463

Abort issued!!
12:06:03 PM  8/31/2006    Executing "drive s1 rand2"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      -15.00000
Drive aborted!!
Final Motor Positions:
motor        position
s1      -83.16565

Abort issued!!
12:08:15 PM  8/31/2006    Executing "drive s1 rand2"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      -15.00000
Drive aborted!!
Final Motor Positions:
motor        position
s1      165.84228

Abort issued!!
5:36:38 PM  8/31/2006    Executing "drive h 1 k 1 l 1 e 0"

5:43:07 PM  8/31/2006    Executing "drive h 1 k 1 l 1 e 0"
ERROR in drive command: Q is not in the specified scattering plane..Move aborted.

5:43:47 PM  8/31/2006    Executing "drive h 1 k 1 l 0 e 0"
Driving to the following position: ""
Destination Motor Positions:
motor        position
m2      -74.14280
m1      142.92860
a2      -74.14280
a1      142.92860
s2      33.69385
s1      -64.90703
sgl      0.00041
sgu      -0.00035
mfocus      -28.59425
Drive aborted!!
Final Motor Positions:
motor        position
m2      -74.14049
m1      142.92501
a2      -74.13880
a1      142.92885
s2      33.69333
s1      -63.79953
sgl      -0.00023
sgu      -0.00006
mfocus      -28.64370

Abort issued!!
5:44:36 PM  8/31/2006    Executing "drive s2 40"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s2      40.00000
Drive completed.

5:44:52 PM  8/31/2006    Executing "drive h 1 k 1 l 0 e 0"
Driving to the following position: ""
Destination Motor Positions:
motor        position
m2      -74.14280
m1      142.92860
a2      -74.14280
a1      142.92860
s2      33.69385
s1      -64.90703
sgl      0.00041
sgu      -0.00035
mfocus      -28.59425
Drive completed.

5:45:49 PM  8/31/2006    Executing "drive h 1 k 1 l 0 e 0"
Driving to the following position: ""
Destination Motor Positions:
motor        position
m2      -74.14280
m1      142.92860
a2      -74.14280
a1      142.92860
s2      33.69385
s1      -64.90703
sgl      0.00041
sgu      -0.00035
mfocus      -28.59425
Drive completed.

5:48:15 PM  8/31/2006    Executing "drive h 1 k 1 l 0 e 0"
Driving to the following position: ""
Destination Motor Positions:
motor        position
m2      -74.14280
m1      142.92860
a2      -74.14280
a1      142.92860
s2      33.69385
s1      -64.90703
sgl      0.00041
sgu      -0.00035
mfocus      -28.59425
Drive completed.

5:49:01 PM  8/31/2006    Executing "drive m2 -70 m1 140 a2 -70 a1 140 s2 34 s1 -65 sgl 1 sgu 2 mfocus 10"
ERROR in drive command: motor number 5 (name "mfocus" ) has multiple destinations "10.000000,-29.757367" which are not identical. ..Move aborted.

5:49:11 PM  8/31/2006    Executing "drive m2 -70 m1 140 a2 -70 a1 140 s2 34 s1 -65 sgl 1 sgu 2"
Driving to the following position: ""
Destination Motor Positions:
motor        position
m2      -70.00000
m1      140.00000
a2      -70.00000
a1      140.00000
s2      34.00000
s1      -65.00000
sgl      1.00000
sgu      2.00000
mfocus      -29.75737
Drive completed.

5:50:22 PM  8/31/2006    Executing "drive h 1 k 1 l 0 e 0"
Driving to the following position: ""
Destination Motor Positions:
motor        position
m2      -74.14280
m1      142.92860
a2      -74.14280
a1      142.92860
s2      33.69385
s1      -64.90703
sgl      0.00041
sgu      -0.00035
mfocus      -28.59425
Drive completed.

10:59:58 AM  9/1/2006    Executing "drive h 1 k 1 l 0 e 0"
Driving to the following position: ""
Destination Motor Positions:
motor        position
m2      -74.14280
m1      142.92860
a2      -74.14280
a1      142.92860
s2      33.69385
s1      -64.90703
sgl      0.00041
sgu      -0.00035
mfocus      -28.59425
Drive completed.

11:00:23 AM  9/1/2006    Executing "drive h 2 k 2 l 0 e 5"
ERROR in drive command: Cannot have a final energy which is less than or equal to zero..Move aborted.

11:00:49 AM  9/1/2006    Executing "ef 14.700000"
Setting the final energy to 14.700meV and the configuration to "Fixed Ef".

11:00:50 AM  9/1/2006    Executing "plusminus - + -"
Setting the instrument configuration to:
1. (monochromator)   -1 +
2.        (sample)    1 +
3.      (analyzer)   -1 -

11:00:50 AM  9/1/2006    Executing "exptitle "Inelastic neutron scattering from something""
Setting the experiment title to:
Inelastic neutron scattering from something

11:00:50 AM  9/1/2006    Executing "collimation 48.000000 40.000000 40.000000 120.000000"
Setting the collimation to:
   source-monochromator:     48.000000
   monochromator-sample:     40.000000
        sample-analyzer:     40.000000
      analyzer-detector:    120.000000
11:00:50 AM  9/1/2006    Executing "monochromator pg002"
Setting the monochromator to PG002 with a d-spacing of 3.3550 Angstroms.
11:00:50 AM  9/1/2006    Executing "analyzer pg002"
Setting the analyzer to Pg002 with a d-spacing of 3.3550 Angstroms.
11:00:57 AM  9/1/2006    Executing "drive h 2 k 2 l 0 e 5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
m2      -35.35888
m1      162.32056
a2      -41.16623
a1      159.41688
s2      35.57999
s1      -51.13646
sgl      0.00041
sgu      -0.00035
mfocus      -47.65237
Drive completed.

11:01:17 AM  9/1/2006    Executing "drive h 2 k 2 l 0 ei 10 ef 10"
Driving to the following position: ""
Destination Motor Positions:
motor        position
m2      -50.45973
m1      154.77013
a2      -50.45973
a1      154.77013
s2      48.39225
s1      -57.55783
sgl      0.00041
sgu      -0.00035
mfocus      -37.43048
Drive completed.

11:46:08 AM  9/1/2006    Executing "drive s1 rand2"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      -15.00000
Drive aborted!!
Final Motor Positions:
motor        position
s1      -132.92501

Abort issued!!
11:48:30 AM  9/1/2006    Executing "drive s1 rand2"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      -15.00000
Drive aborted!!
Final Motor Positions:
motor        position
s1      37.01586

Abort issued!!
11:52:34 AM  9/1/2006    Executing "drive s1 100"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      100.00000
Drive completed.

11:52:55 AM  9/1/2006    Executing "drive s1 110"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      110.00000
Drive completed.

11:54:48 AM  9/1/2006    Executing "drive s1 rand2"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      -15.00000
Drive completed.

1:28:39 PM  9/1/2006    Executing "scan s2 20 30 1 s1 rand1 preset time 0.5"

# scan = 7
# date = 9/1/2006
# time = 1:28:39 PM
# experiment = Inelastic neutron scattering from something
# experiment_number = 1
# command = scan s2 20 30 1 s1 rand1  preset time 0.5
# builtin_command = scan s2 20 30 1 s1 rand1 preset time 0.5
# users = M. Lumsden, L. Robertson, M. Yethiraj
# local_contact = All of us
# scan_title = 
# monochromator = PG002
# analyzer = Pg002
# sense = -+-
# collimation = 48-40-40-120
# samplename = Test crystal
# sampletype = crystal
# samplemosaic = 30.000000
# latticeconstants = 11.973000,8.626000,14.340000,90.000000,97.470000,90.000000
# ubmatrix = -0.074543,0.053990,-0.008092,-0.039231,-0.102589,-0.004259,-0.000001,-0.000000,0.069735
# mode = 0
# plane_normal = -0.000007,-0.000006,1.000000
# ubconf = 
# preset_type = normal 
# preset_channel = time
# preset_value = 0.500000
# def_x = s2
# def_y = detector
# col_headers = 
#   Pt.         s2         s1       time    monitor   detector focal_length         m1         m2     mfocus        sgl        sgu        stl        stu         a1         a2          q          h          k          l         ei         ef          e
      1    19.9986   -98.2188      0.000      0.000      0.000    81.0322   154.7685   -50.4576   -37.4151     0.0003    -0.0008     0.0000     0.0001   154.7707   -50.4626     0.7629     0.2385     1.0329    -0.0000    10.0008     9.9989     0.001
# Sum of Counts = 0
# Center of Mass = NaN+/-NaN
# Full Width Half-Maximum = NaN+/-NaN
# 1:28:47 PM  9/1/2006   scan stopped!!
Abort issued!!
1:30:03 PM  9/1/2006    Executing "scan s2 20 30 1 s1 rand1 preset time 0.5"

# scan = 8
# date = 9/1/2006
# time = 1:30:03 PM
# experiment = Inelastic neutron scattering from something
# experiment_number = 1
# command = scan s2 20 30 1 s1 rand1  preset time 0.5
# builtin_command = scan s2 20 30 1 s1 rand1 preset time 0.5
# users = M. Lumsden, L. Robertson, M. Yethiraj
# local_contact = All of us
# scan_title = 
# monochromator = PG002
# analyzer = Pg002
# sense = -+-
# collimation = 48-40-40-120
# samplename = Test crystal
# sampletype = crystal
# samplemosaic = 30.000000
# latticeconstants = 11.973000,8.626000,14.340000,90.000000,97.470000,90.000000
# ubmatrix = -0.074543,0.053990,-0.008092,-0.039231,-0.102589,-0.004259,-0.000001,-0.000000,0.069735
# mode = 0
# plane_normal = -0.000007,-0.000006,1.000000
# ubconf = 
# preset_type = normal 
# preset_channel = time
# preset_value = 0.500000
# def_x = s2
# def_y = detector
# col_headers = 
#   Pt.         s2         s1       time    monitor   detector focal_length         m1         m2     mfocus        sgl        sgu        stl        stu         a1         a2          q          h          k          l         ei         ef          e
      1    19.9965  -164.8990      0.500   2707.000    105.000    81.0322   154.7685   -50.4576   -37.4151     0.0003    -0.0008     0.0000     0.0001   154.7707   -50.4626     0.7628    -1.2109     0.5680     0.0000    10.0008     9.9989     0.001
      2    20.9957     1.5096      0.500   2660.000    110.000    81.0322   154.7685   -50.4576   -37.4151     0.0003    -0.0008     0.0000     0.0001   154.7707   -50.4626     0.8005     1.4322    -0.3533     0.0000    10.0008     9.9989     0.001
      3    22.0025  -148.7716      0.500   2517.000    107.000    81.0322   154.7685   -50.4576   -37.4151     0.0003    -0.0008     0.0000     0.0001   154.7707   -50.4626     0.8384    -1.0606     0.8550     0.0000    10.0008     9.9989     0.001
      4    23.0006    86.7354      0.500   2668.000    117.000    81.0322   154.7685   -50.4576   -37.4151     0.0003    -0.0008     0.0000     0.0001   154.7707   -50.4626     0.8760    -0.3717    -1.1719     0.0000    10.0008     9.9989     0.001
      5    24.0024  -178.1667      0.500   2442.000     94.000    81.0322   154.7685   -50.4576   -37.4151     0.0003    -0.0008     0.0000     0.0001   154.7707   -50.4626     0.9136    -1.6455     0.3787     0.0000    10.0008     9.9989     0.001
      6    25.0037   -37.0287      0.500   2543.000    103.000    81.0322   154.7685   -50.4576   -37.4151     0.0003    -0.0008     0.0000     0.0001   154.7707   -50.4626     0.9511     1.6686     0.4846    -0.0000    10.0008     9.9989     0.001
      7    25.9970  -145.0153      0.500   2544.000    105.000    81.0322   154.7685   -50.4576   -37.4151     0.0003    -0.0008     0.0000     0.0001   154.7707   -50.4626     0.9882    -1.2069     1.0352    -0.0000    10.0008     9.9989     0.001
      8    27.0010   129.6980      0.500   2603.000     89.000    81.0322   154.7685   -50.4576   -37.4151     0.0003    -0.0008     0.0000     0.0001   154.7707   -50.4626     1.0257    -1.5667    -0.8288     0.0000    10.0008     9.9989     0.001
      9    27.9991   164.3963      0.500   2684.000    115.000    81.0322   154.7685   -50.4576   -37.4151     0.0003    -0.0008     0.0000     0.0001   154.7707   -50.4626     1.0629    -2.0071    -0.0473     0.0000    10.0008     9.9989     0.001
     10    29.0004   104.6862      0.500   2569.000    105.000    81.0322   154.7685   -50.4576   -37.4151     0.0003    -0.0008     0.0000     0.0001   154.7707   -50.4626     1.1001    -0.9736    -1.3343     0.0000    10.0008     9.9989     0.001
     11    29.9977   -49.9466      0.500   2614.000    110.000    81.0322   154.7685   -50.4576   -37.4151     0.0003    -0.0008     0.0000     0.0001   154.7707   -50.4626     1.1371     1.7113     0.9438    -0.0000    10.0008     9.9989     0.001
# Sum of Counts = 1160
# Center of Mass = 24.985831+/-1.041711
# Full Width Half-Maximum = 6.389055+/-0.653999
# 1:31:07 PM  9/1/2006   scan completed.
3:08:24 PM  9/5/2006    Executing "scan h 1 k 1 l 1 e 0 10 1 preset countfile testfile"

# scan = 9
# date = 9/5/2006
# time = 3:08:24 PM
# experiment = Inelastic neutron scattering from something
# experiment_number = 1
# command = scan h 1 k 1 l 1 e 0 10 1 preset countfile testfile
# builtin_command = scan h 1 k 1 l 1 e 0 10 1 preset countfile testfile
# users = M. Lumsden, L. Robertson, M. Yethiraj
# local_contact = All of us
# scan_title = 
# monochromator = PG002
# analyzer = Pg002
# sense = -+-
# collimation = 48-40-40-120
# samplename = Test crystal
# sampletype = crystal
# samplemosaic = 30.000000
# latticeconstants = 11.973000,8.626000,14.340000,90.000000,97.470000,90.000000
# ubmatrix = -0.074543,0.053990,-0.008092,-0.039231,-0.102589,-0.004259,-0.000001,-0.000000,0.069735
# mode = 0
# plane_normal = -0.000007,-0.000006,1.000000
# ubconf = 
# warning = WARNING : Point #1 : Q is not in the specified scattering plane
# warning = WARNING : Point #6 : Q is not in the specified scattering plane
# warning = WARNING : Point #11 : Q is not in the specified scattering plane
# preset_type = countfile
# countfile = drive s1 @(m2)/2
# countfile = count preset time 10
# def_x = e
# def_y = detector
# col_headers = 
#   Pt.          h          k          l          e       time    monitor   detector focal_length         m1         m2     mfocus         s1         s2        sgl        sgu        stl        stu         a1         a2          q         ei         ef
# ERROR in driving: Q is not in the specified scattering plane...Move aborted.
# ERROR in driving: Q is not in the specified scattering plane...Move aborted.
# ERROR in driving: Q is not in the specified scattering plane...Move aborted.
# ERROR in driving: Q is not in the specified scattering plane...Move aborted.
# ERROR in driving: Q is not in the specified scattering plane...Move aborted.
# ERROR in driving: Q is not in the specified scattering plane...Move aborted.
# ERROR in driving: Q is not in the specified scattering plane...Move aborted.
# ERROR in driving: Q is not in the specified scattering plane...Move aborted.
# ERROR in driving: Q is not in the specified scattering plane...Move aborted.
# ERROR in driving: Q is not in the specified scattering plane...Move aborted.
# ERROR in driving: Q is not in the specified scattering plane...Move aborted.
# Sum of Counts = 0
# Center of Mass = 0.000000+/-0.000000
# Full Width Half-Maximum = 0.000000+/-0.000000
# 3:08:24 PM  9/5/2006   scan completed.
3:08:30 PM  9/5/2006    Executing "scan h 1 k 1 l 0 e 0 10 1 preset countfile testfile"

# scan = 10
# date = 9/5/2006
# time = 3:08:30 PM
# experiment = Inelastic neutron scattering from something
# experiment_number = 1
# command = scan h 1 k 1 l 0 e 0 10 1 preset countfile testfile
# builtin_command = scan h 1 k 1 l 0 e 0 10 1 preset countfile testfile
# users = M. Lumsden, L. Robertson, M. Yethiraj
# local_contact = All of us
# scan_title = 
# monochromator = PG002
# analyzer = Pg002
# sense = -+-
# collimation = 48-40-40-120
# samplename = Test crystal
# sampletype = crystal
# samplemosaic = 30.000000
# latticeconstants = 11.973000,8.626000,14.340000,90.000000,97.470000,90.000000
# ubmatrix = -0.074543,0.053990,-0.008092,-0.039231,-0.102589,-0.004259,-0.000001,-0.000000,0.069735
# mode = 0
# plane_normal = -0.000007,-0.000006,1.000000
# ubconf = 
# preset_type = countfile
# countfile = drive s1 @(m2)/2
# countfile = count preset time 10
# def_x = e
# def_y = detector
# col_headers = 
#   Pt.          h          k          l          e       time    monitor   detector focal_length         m1         m2     mfocus         s1         s2        sgl        sgu        stl        stu         a1         a2          q         ei         ef
      1     0.7450     1.1116     0.0000    -0.0002    66.8758   159.4119   -41.1626   -43.0234   -82.0605    19.4654     0.0005    -0.0004     0.0000     0.0001   159.4161   -41.1623     0.9006    14.7025    14.702
      2    -1.1500     0.9107     0.0000     1.0003    64.6438   160.1203   -39.7745   -44.0647  -145.1686    19.0435     0.0004    -0.0005     0.0000     0.0001   159.4176   -41.1646     0.9003    15.7014    14.701
      3     0.5080    -1.1795    -0.0000     1.9965    62.7562   160.7349   -38.5216   -44.9856    65.1766    18.4801     0.0008    -0.0002     0.0000     0.0001   159.4172   -41.1650     0.9002    16.6974    14.700
      4    -0.7953     1.0927     0.0000     3.0069    60.9400   161.3047   -37.3696   -45.9087  -120.1819    17.7746     0.0005    -0.0001     0.0000     0.0001   159.4170   -41.1717     0.9004    17.7031    14.696
      5    -1.2720     0.8213     0.0000     4.0035    59.1602   161.8395   -36.3228   -46.8508  -135.6735    16.9466     0.0002    -0.0003     0.0000     0.0001   159.4173   -41.1695     0.9006    18.7013    14.697
      6    -1.3111    -0.7876     0.0000     5.0003    57.7517   162.3271   -35.3611   -47.6242  -211.8426    15.9770     0.0005    -0.0005     0.0000     0.0001   159.4177   -41.1702     0.9004    19.6976    14.697
      7    -0.4295    -1.1954     0.0000     5.9922    56.2632   162.7689   -34.4681   -48.4698   117.4707    14.8627    -0.0001    -0.0011     0.0000     0.0001   159.4170   -41.1571     0.8999    20.6985    14.706
      8    -0.5135     1.1785     0.0000     6.9974    54.9227   163.1791   -33.6413   -49.2575   -89.3841    13.5967     0.0008    -0.0003     0.0000     0.0001   159.4176   -41.1666     0.9004    21.6972    14.699
      9    -1.5616    -0.4921     0.0000     8.0064    53.7963   163.5650   -32.8637   -49.9394  -179.5819    12.1227     0.0007     0.0000     0.0000     0.0001   159.4163   -41.1668     0.9009    22.7060    14.699
     10    -1.2196    -0.8611    -0.0000     8.9952    52.5313   163.9258   -32.1507   -50.7281  -194.1330    10.3729     0.0004     0.0002     0.0000     0.0001   159.4167   -41.1646     0.9000    23.6963    14.701
     11    -0.8087     1.0884     0.0000    10.0075    51.5423   164.2608   -31.4728   -51.3622   -81.0572     8.2016     0.0006    -0.0008     0.0000     0.0001   159.4171   -41.1760     0.9010    24.7009    14.693
# Sum of Counts = -393
# Center of Mass = 4.732825+/-NaN
# Full Width Half-Maximum = 6.329268+/-NaN
# 3:09:18 PM  9/5/2006   scan completed.
3:18:39 PM  9/5/2006    Executing "drive s1 10"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      10.00000
Drive completed.

3:18:56 PM  9/5/2006    Executing "scan h 1 k 1 l 0 e 0 10 1 preset countfile testfile"

# scan = 11
# date = 9/5/2006
# time = 3:18:56 PM
# experiment = Inelastic neutron scattering from something
# experiment_number = 1
# command = scan h 1 k 1 l 0 e 0 10 1 preset countfile testfile
# builtin_command = scan h 1 k 1 l 0 e 0 10 1 preset countfile testfile
# users = M. Lumsden, L. Robertson, M. Yethiraj
# local_contact = All of us
# scan_title = 
# monochromator = PG002
# analyzer = Pg002
# sense = -+-
# collimation = 48-40-40-120
# samplename = Test crystal
# sampletype = crystal
# samplemosaic = 30.000000
# latticeconstants = 11.973000,8.626000,14.340000,90.000000,97.470000,90.000000
# ubmatrix = -0.074543,0.053990,-0.008092,-0.039231,-0.102589,-0.004259,-0.000001,-0.000000,0.069735
# mode = 0
# plane_normal = -0.000007,-0.000006,1.000000
# ubconf = 
# preset_type = countfile
# countfile = drive s1 @(m2)/2
# countfile = count preset time 10
# def_x = e
# def_y = detector
# col_headers = 
#   Pt.          h          k          l          e       time    monitor   detector focal_length         m1         m2     mfocus         s1         s2        sgl        sgu        stl        stu         a1         a2          q         ei         ef
      1     1.0000     0.9998     0.0000    -0.0010    66.6450   159.4193   -41.1710   -43.1288   -72.0220    19.4616     0.0009    -0.0005     0.0000     0.0001   159.4170   -41.1696     0.9003    14.6967    14.697
      2     1.0002     1.0000     0.0000     0.9993    64.7182   160.1173   -39.7732   -44.0292   -66.6309    19.0467     0.0011     0.0005     0.0000     0.0001   159.4168   -41.1617     0.9005    15.7024    14.703
      3     0.9998     1.0001     0.0000     2.0014    62.7480   160.7428   -38.5186   -44.9897   -61.4267    18.4819     0.0008     0.0000     0.0000     0.0001   159.4169   -41.1685     0.9004    16.6999    14.698
      4     1.0003     1.0003     0.0000     3.0006    60.8782   161.3090   -37.3698   -45.9408   -56.3414    17.7826     0.0009    -0.0003     0.0000     0.0001   159.4170   -41.1629     0.9006    17.7029    14.702
      5     1.0008     0.9993     0.0000     3.9925    59.2879   161.8312   -36.3261   -46.7819   -51.3107    16.9449     0.0006    -0.0004     0.0000     0.0001   159.4175   -41.1583     0.9002    18.6980    14.705
      6     0.9993     1.0005     0.0000     5.0053    57.7543   162.3191   -35.3593   -47.6228   -46.2626    15.9749     0.0004     0.0001     0.0000     0.0001   159.4170   -41.1748     0.9005    19.6995    14.694
      7     0.9998     1.0001    -0.0000     6.0004    56.2034   162.7706   -34.4692   -48.5045   -41.1236    14.8657     0.0008    -0.0011     0.0000     0.0001   159.4172   -41.1709     0.9004    20.6972    14.696
      8     0.9999     1.0009     0.0000     7.0083    54.9311   163.1855   -33.6347   -49.2525   -35.7959    13.5938     0.0006     0.0004     0.0000     0.0001   159.4165   -41.1704     0.9009    21.7055    14.697
      9     1.0001     1.0002     0.0000     8.0011    53.8490   163.5665   -32.8685   -49.9071   -30.1459    12.1209     0.0002     0.0002     0.0000     0.0001   159.4169   -41.1683     0.9005    22.6997    14.698
     10     0.9996     1.0004     0.0000     9.0036    52.6316   163.9216   -32.1474   -50.6647   -23.9430    10.3706    -0.0001    -0.0002     0.0000     0.0001   159.4163   -41.1700     0.9005    23.7010    14.697
     11     1.0001     0.9997     0.0000     9.9970    51.5375   164.2703   -31.4749   -51.3653   -16.7122     8.2022    -0.0001     0.0004     0.0000     0.0001   159.4167   -41.1652     0.9002    24.6977    14.700
# Sum of Counts = -393
# Center of Mass = 4.732931+/-NaN
# Full Width Half-Maximum = 6.330283+/-NaN
# 3:19:17 PM  9/5/2006   scan completed.
3:19:34 PM  9/5/2006    Executing "drive s1 rand1"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      -15.00000
Drive completed.

3:19:39 PM  9/5/2006    Executing "scan h 1 k 1 l 0 e 0 10 1 preset countfile testfile"

# scan = 12
# date = 9/5/2006
# time = 3:19:39 PM
# experiment = Inelastic neutron scattering from something
# experiment_number = 1
# command = scan h 1 k 1 l 0 e 0 10 1 preset countfile testfile
# builtin_command = scan h 1 k 1 l 0 e 0 10 1 preset countfile testfile
# users = M. Lumsden, L. Robertson, M. Yethiraj
# local_contact = All of us
# scan_title = 
# monochromator = PG002
# analyzer = Pg002
# sense = -+-
# collimation = 48-40-40-120
# samplename = Test crystal
# sampletype = crystal
# samplemosaic = 30.000000
# latticeconstants = 11.973000,8.626000,14.340000,90.000000,97.470000,90.000000
# ubmatrix = -0.074543,0.053990,-0.008092,-0.039231,-0.102589,-0.004259,-0.000001,-0.000000,0.069735
# mode = 0
# plane_normal = -0.000007,-0.000006,1.000000
# ubconf = 
# preset_type = countfile
# countfile = drive s1 @(m2)/2
# countfile = count preset time 10
# def_x = e
# def_y = detector
# col_headers = 
#   Pt.          h          k          l          e       time    monitor   detector focal_length         m1         m2     mfocus         s1         s2        sgl        sgu        stl        stu         a1         a2          q         ei         ef
      1     0.8335     1.0774     0.0000    -0.0014    66.6417   159.4187   -41.1685   -43.1302   -78.6938    19.4606    -0.0004     0.0005     0.0000     0.0001   159.4168   -41.1665     0.9003    14.6984    14.699
      2    -0.0193     1.2359     0.0000     0.9941    64.4574   160.1063   -39.7811   -44.1540  -103.3149    19.0467     0.0006     0.0004     0.0000     0.0001   159.4172   -41.1629     0.9003    15.6964    14.702
      3    -1.6985    -0.0716    -0.0000     1.9947    62.8222   160.7499   -38.5178   -44.9527  -190.7797    18.4827    -0.0004    -0.0011     0.0000     0.0001   159.4163   -41.1577     0.9005    16.7006    14.705
      4     0.0177    -1.2360     0.0000     3.0010    60.9086   161.3047   -37.3708   -45.9250    87.0649    17.7760    -0.0001    -0.0003     0.0000     0.0001   159.4164   -41.1647     0.9003    17.7020    14.701
      5    -1.6617    -0.2642    -0.0000     3.9965    59.2665   161.8385   -36.3250   -46.7934  -189.6732    16.9440     0.0001    -0.0000     0.0000     0.0001   159.4168   -41.1624     0.9003    18.6991    14.702
      6    -1.1020     0.9417     0.0000     4.9993    57.7505   162.3142   -35.3544   -47.6249  -122.6498    15.9747     0.0010    -0.0003     0.0000     0.0001   159.4164   -41.1582     0.9004    19.7048    14.705
      7    -1.5029    -0.5784     0.0000     5.9943    56.3384   162.7699   -34.4694   -48.4264   164.9398    14.8656     0.0011    -0.0002     0.0000     0.0001   159.4164   -41.1623     0.9001    20.6970    14.702
      8     1.2159    -0.8654    -0.0000     7.0075    54.9542   163.1857   -33.6358   -49.2387    62.6358    13.5935     0.0011     0.0001     0.0000     0.0001   159.4167   -41.1713     0.9008    21.7041    14.696
# Sum of Counts = -297
# Center of Mass = 3.346718+/-NaN
# Full Width Half-Maximum = 4.587805+/-NaN
# 3:20:22 PM  9/5/2006   scan stopped!!
Abort issued!!
3:20:26 PM  9/5/2006    Executing "drive s1 rand1"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      -15.00000
Drive completed.

3:20:33 PM  9/5/2006    Executing "scan h 1 k 1 l 0 e 0 10 1 preset time 1"

# scan = 13
# date = 9/5/2006
# time = 3:20:33 PM
# experiment = Inelastic neutron scattering from something
# experiment_number = 1
# command = scan h 1 k 1 l 0 e 0 10 1 preset time 1
# builtin_command = scan h 1 k 1 l 0 e 0 10 1 preset time 1
# users = M. Lumsden, L. Robertson, M. Yethiraj
# local_contact = All of us
# scan_title = 
# monochromator = PG002
# analyzer = Pg002
# sense = -+-
# collimation = 48-40-40-120
# samplename = Test crystal
# sampletype = crystal
# samplemosaic = 30.000000
# latticeconstants = 11.973000,8.626000,14.340000,90.000000,97.470000,90.000000
# ubmatrix = -0.074543,0.053990,-0.008092,-0.039231,-0.102589,-0.004259,-0.000001,-0.000000,0.069735
# mode = 0
# plane_normal = -0.000007,-0.000006,1.000000
# ubconf = 
# preset_type = normal 
# preset_channel = time
# preset_value = 1.000000
# def_x = e
# def_y = detector
# col_headers = 
#   Pt.          h          k          l          e       time    monitor   detector focal_length         m1         m2     mfocus         s1         s2        sgl        sgu        stl        stu         a1         a2          q         ei         ef
      1     1.6265    -0.3628    -0.0000    -0.0068      1.000   5116.000    194.000    66.8464   159.4165   -41.1671   -43.0367    -1.0002    19.4630     0.0009    -0.0007     0.0000     0.0001   159.4176   -41.1571     0.9005    14.6994    14.706
      2     1.5748     0.4670     0.0000     0.9977      1.000   4991.000    216.000    64.7072   160.1105   -39.7764   -44.0344   -34.8469    19.0434     0.0007    -0.0001     0.0000     0.0001   159.4162   -41.1630     0.9002    15.6999    14.702
      3     1.3966    -0.7060     0.0000     2.0013      1.000   5139.000    250.000    62.7081   160.7504   -38.5186   -45.0096    27.4046    18.4837     0.0004    -0.0006     0.0000     0.0001   159.4174   -41.1682     0.9005    16.6999    14.698
      4    -1.6876     0.1551     0.0000     2.9980      1.000   5005.000    199.000    60.8215   161.3167   -37.3743   -45.9702  -175.1466    17.7781     0.0003    -0.0000     0.0000     0.0001   159.4166   -41.1650     0.9003    17.6988    14.700
      5     0.9352    -1.0327    -0.0000     4.0025      1.000   5207.000    178.000    59.3255   161.8424   -36.3224   -46.7617    59.3547    16.9439     0.0011    -0.0001     0.0000     0.0001   159.4169   -41.1674     0.9005    18.7017    14.699
      6     0.8993    -1.0491    -0.0000     4.9978      0.721   3629.000    140.000    57.7538   162.3250   -35.3604   -47.6231    65.8091    15.9755     0.0009     0.0003     0.0000     0.0001   159.4170   -41.1653     0.9003    19.6984    14.700
# Sum of Counts = 1177
# Center of Mass = 2.313720+/-0.106302
# Full Width Half-Maximum = 3.220885+/-0.114791
# 3:21:03 PM  9/5/2006   scan stopped!!
Abort issued!!
3:21:09 PM  9/5/2006    Executing "calc h 1 k 1 l 0 e 0"
Calculating motor positions based on:
h=1.00000     k=1.00000     l=0.00000     e=0.00000     
Resulting calculated motor positions:
m2=-41.16623     m1=159.41688     a2=-41.16623     a1=159.41688     s2=19.46215     s1=-72.02288     sgl=0.00041     sgu=-0.00035     mfocus=-43.05904     
NOTE: Any values not explicitly specified will be read from the current motor positions.

3:27:20 PM  9/5/2006    Executing "scan h 1 k 1 l 0 e 0 10 1 preset time 1"

# scan = 14
# date = 9/5/2006
# time = 3:27:20 PM
# experiment = Inelastic neutron scattering from something
# experiment_number = 1
# command = scan h 1 k 1 l 0 e 0 10 1 preset time 1
# builtin_command = scan h 1 k 1 l 0 e 0 10 1 preset time 1
# users = M. Lumsden, L. Robertson, M. Yethiraj
# local_contact = All of us
# scan_title = 
# monochromator = PG002
# analyzer = Pg002
# sense = -+-
# collimation = 48-40-40-120
# samplename = Test crystal
# sampletype = crystal
# samplemosaic = 30.000000
# latticeconstants = 11.973000,8.626000,14.340000,90.000000,97.470000,90.000000
# ubmatrix = -0.074543,0.053990,-0.008092,-0.039231,-0.102589,-0.004259,-0.000001,-0.000000,0.069735
# mode = 0
# plane_normal = -0.000007,-0.000006,1.000000
# ubconf = 
# preset_type = normal 
# preset_channel = time
# preset_value = 1.000000
# def_x = e
# def_y = detector
# col_headers = 
#   Pt.          h          k          l          e       time    monitor   detector focal_length         m1         m2     mfocus         s1         s2        sgl        sgu        stl        stu         a1         a2          q         ei         ef
      1    -1.6965    -0.0882    -0.0000     0.0028      1.000   4960.000    188.000    66.8558   159.4158   -41.1643   -43.0325  -202.1048    19.4585     0.0006     0.0005     0.0000     0.0001   159.4162   -41.1683     0.9002    14.7014    14.698
      2    -1.6179     0.3810    -0.0000     0.9953      1.000   5252.000    214.000    64.5053   160.1025   -39.7795   -44.1310  -174.7029    19.0432     0.0001    -0.0004     0.0000     0.0001   159.4166   -41.1629     0.9002    15.6976    14.702
      3    -1.7016    -0.0107     0.0000     2.0050      1.000   5123.000    217.000    62.7960   160.7430   -38.5160   -44.9658  -187.8972    18.4852     0.0006     0.0001     0.0000     0.0001   159.4168   -41.1707     0.9006    16.7020    14.697
      4     1.1764    -0.8926     0.0000     2.9992      1.000   5012.000    195.000    60.8448   161.3153   -37.3776   -45.9581    43.8958    17.7776     0.0008    -0.0008     0.0000     0.0001   159.4168   -41.1713     0.9002    17.6958    14.696
      5    -0.4671    -1.1884    -0.0000     4.0004      0.000      0.000      0.000    59.1570   161.8309   -36.3263   -46.8525   108.6317    16.9417     0.0005     0.0003     0.0000     0.0001   159.4175   -41.1700     0.9002    18.6978    14.697
# Sum of Counts = 814
# Center of Mass = 1.515294+/-0.084288
# Full Width Half-Maximum = 2.182536+/-0.103556
# 3:27:46 PM  9/5/2006   scan stopped!!
Abort issued!!
3:27:59 PM  9/5/2006    Executing "scan h 1 k 1 l 0 e 0 10 1 preset time 1"

# scan = 15
# date = 9/5/2006
# time = 3:27:59 PM
# experiment = Inelastic neutron scattering from something
# experiment_number = 1
# command = scan h 1 k 1 l 0 e 0 10 1 preset time 1
# builtin_command = scan h 1 k 1 l 0 e 0 10 1 preset time 1
# users = M. Lumsden, L. Robertson, M. Yethiraj
# local_contact = All of us
# scan_title = 
# monochromator = PG002
# analyzer = Pg002
# sense = -+-
# collimation = 48-40-40-120
# samplename = Test crystal
# sampletype = crystal
# samplemosaic = 30.000000
# latticeconstants = 11.973000,8.626000,14.340000,90.000000,97.470000,90.000000
# ubmatrix = -0.074543,0.053990,-0.008092,-0.039231,-0.102589,-0.004259,-0.000001,-0.000000,0.069735
# mode = 0
# plane_normal = -0.000007,-0.000006,1.000000
# ubconf = 
# preset_type = normal 
# preset_channel = time
# preset_value = 1.000000
# def_x = e
# def_y = detector
# col_headers = 
#   Pt.          h          k          l          e       time    monitor   detector focal_length         m1         m2     mfocus         s1         s2        sgl        sgu        stl        stu         a1         a2          q         ei         ef
      1     1.0283     0.9850     0.0000     0.0032      0.000      0.000      0.000    66.6335   159.4205   -41.1654   -43.1340   -70.8243    19.4662     0.0000    -0.0005     0.0000     0.0001   159.4168   -41.1701     0.9005    14.7006    14.697
# Sum of Counts = 0
# Center of Mass = NaN+/-NaN
# Full Width Half-Maximum = NaN+/-NaN
# 3:28:22 PM  9/5/2006   scan stopped!!
Abort issued!!
9:28:03 AM  10/2/2006    Executing "drive s2 25.000"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s2      25.00000
Drive completed.

9:28:28 AM  10/2/2006    Executing "scan s2 24.9986 50.0000 1.0001 preset time 1.000000"

# scan = 16
# date = 10/2/2006
# time = 9:28:28 AM
# experiment = Inelastic neutron scattering from something
# experiment_number = 1
# command = scan s2 24.9986 50.0000 1.0001 preset time 1.000000
# builtin_command = scan s2 24.9986 50.0000 1.0001 preset time 1.000000
# users = M. Lumsden, L. Robertson, M. Yethiraj
# local_contact = All of us
# scan_title = 
# monochromator = PG002
# analyzer = Pg002
# sense = -+-
# collimation = 48-40-40-120
# samplename = Test crystal
# sampletype = crystal
# samplemosaic = 30.000000
# latticeconstants = 11.973000,8.626000,14.340000,90.000000,97.470000,90.000000
# ubmatrix = -0.074543,0.053990,-0.008092,-0.039231,-0.102589,-0.004259,-0.000001,-0.000000,0.069735
# mode = 0
# plane_normal = -0.000007,-0.000006,1.000000
# ubconf = 
# preset_type = normal 
# preset_channel = time
# preset_value = 1.000000
# def_x = s2
# def_y = detector
# col_headers = 
#   Pt.         s2       time    monitor   detector focal_length         m1         m2     mfocus         s1        sgl        sgu        stl        stu         a1         a2          q          h          k          l         ei         ef          e
      1    25.0002      1.000   5057.000    197.000    66.6335   159.4205   -41.1654   -43.1340   -70.8243     0.0000    -0.0005     0.0000     0.0001   159.4168   -41.1701     1.1529     1.2313     1.3057     0.0000    14.7006    14.6974     0.003
      2    25.9963      1.000   5061.000    202.000    66.6335   159.4205   -41.1654   -43.1340   -70.8243     0.0000    -0.0005     0.0000     0.0001   159.4168   -41.1701     1.1981     1.2632     1.3649     0.0000    14.7006    14.6974     0.003
      3    26.9953      1.000   4927.000    201.000    66.6335   159.4205   -41.1654   -43.1340   -70.8243     0.0000    -0.0005     0.0000     0.0001   159.4168   -41.1701     1.2433     1.2939     1.4246     0.0000    14.7006    14.6974     0.003
      4    27.9996      1.000   5214.000    208.000    66.6335   159.4205   -41.1654   -43.1340   -70.8243     0.0000    -0.0005     0.0000     0.0001   159.4168   -41.1701     1.2886     1.3232     1.4851     0.0000    14.7006    14.6974     0.003
      5    28.9971      1.000   5183.000    207.000    66.6335   159.4205   -41.1654   -43.1340   -70.8243     0.0000    -0.0005     0.0000     0.0001   159.4168   -41.1701     1.3336     1.3509     1.5455     0.0000    14.7006    14.6974     0.003
      6    29.9992      1.000   5235.000    220.000    66.6335   159.4205   -41.1654   -43.1340   -70.8243     0.0000    -0.0005     0.0000     0.0001   159.4168   -41.1701     1.3786     1.3773     1.6065     0.0000    14.7006    14.6974     0.003
      7    31.0023      1.000   5235.000    188.000    66.6335   159.4205   -41.1654   -43.1340   -70.8243     0.0000    -0.0005     0.0000     0.0001   159.4168   -41.1701     1.4236     1.4022     1.6679     0.0000    14.7006    14.6974     0.003
      8    31.9965      1.000   5190.000    210.000    66.6335   159.4205   -41.1654   -43.1340   -70.8243     0.0000    -0.0005     0.0000     0.0001   159.4168   -41.1701     1.4681     1.4254     1.7290     0.0000    14.7006    14.6974     0.003
      9    33.0006      1.000   5290.000    179.000    66.6335   159.4205   -41.1654   -43.1340   -70.8243     0.0000    -0.0005     0.0000     0.0001   159.4168   -41.1701     1.5129     1.4474     1.7911     0.0000    14.7006    14.6974     0.003
     10    33.9945      1.000   5251.000    205.000    66.6335   159.4205   -41.1654   -43.1340   -70.8243     0.0000    -0.0005     0.0000     0.0001   159.4168   -41.1701     1.5572     1.4677     1.8528    -0.0000    14.7006    14.6974     0.003
     11    35.0015      1.000   5214.000    185.000    66.6335   159.4205   -41.1654   -43.1340   -70.8243     0.0000    -0.0005     0.0000     0.0001   159.4168   -41.1701     1.6019     1.4868     1.9155    -0.0000    14.7006    14.6974     0.003
     12    36.0012      1.052   5333.000    224.000    66.6335   159.4205   -41.1654   -43.1340   -70.8243     0.0000    -0.0005     0.0000     0.0001   159.4168   -41.1701     1.6461     1.5042     1.9780    -0.0000    14.7006    14.6974     0.003
# Sum of Counts = 2426
# Center of Mass = 30.499469+/-0.878524
# Full Width Half-Maximum = 6.916788+/-0.522481
# 9:28:47 AM  10/2/2006   scan stopped!!
Abort issued!!
9:46:43 AM  10/2/2006    Executing "scan h 1 k 1 l 0 e 0 10 1 preset time 1"

# scan = 17
# date = 10/2/2006
# time = 9:46:43 AM
# experiment = Inelastic neutron scattering from something
# experiment_number = 1
# command = scan h 1 k 1 l 0 e 0 10 1 preset time 1
# builtin_command = scan h 1 k 1 l 0 e 0 10 1 preset time 1
# users = M. Lumsden, L. Robertson, M. Yethiraj
# local_contact = All of us
# scan_title = 
# monochromator = PG002
# analyzer = Pg002
# sense = -+-
# collimation = 48-40-40-120
# samplename = Test crystal
# sampletype = crystal
# samplemosaic = 30.000000
# latticeconstants = 11.973000,8.626000,14.340000,90.000000,97.470000,90.000000
# ubmatrix = -0.074543,0.053990,-0.008092,-0.039231,-0.102589,-0.004259,-0.000001,-0.000000,0.069735
# mode = 0
# plane_normal = -0.000007,-0.000006,1.000000
# ubconf = 
# preset_type = normal 
# preset_channel = time
# preset_value = 1.000000
# def_x = e
# def_y = detector
# col_headers = 
#   Pt.          h          k          l          e       time    monitor   detector focal_length         m1         m2     mfocus         s1         s2        sgl        sgu        stl        stu         a1         a2          q         ei         ef
      1    -1.3187    -0.7809     0.0000    -0.0031      1.000   5060.000    205.000    66.8480   159.4114   -41.1632   -43.0360   122.7783    19.4595     0.0006    -0.0011     0.0000     0.0001   159.4170   -41.1586     0.9004    14.7021    14.705
      2     0.8340     1.0772     0.0000     1.0020      0.000      0.000      0.000    64.7048   160.1188   -39.7745   -44.0356   -73.2639    19.0441     0.0003    -0.0002     0.0000     0.0001   159.4171   -41.1671     0.9003    15.7014    14.699
# Sum of Counts = 205
# Center of Mass = -0.003100+/-0.000306
# Full Width Half-Maximum = 0.000000+/-NaN
# 9:46:58 AM  10/2/2006   scan stopped!!
Abort issued!!
9:47:02 AM  10/2/2006    Executing "drive s1 10"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      10.00000
Drive completed.

9:47:14 AM  10/2/2006    Executing "scan h 1 k 1 l 0 e 0 10 1 preset time 1"

# scan = 18
# date = 10/2/2006
# time = 9:47:14 AM
# experiment = Inelastic neutron scattering from something
# experiment_number = 1
# command = scan h 1 k 1 l 0 e 0 10 1 preset time 1
# builtin_command = scan h 1 k 1 l 0 e 0 10 1 preset time 1
# users = M. Lumsden, L. Robertson, M. Yethiraj
# local_contact = All of us
# scan_title = 
# monochromator = PG002
# analyzer = Pg002
# sense = -+-
# collimation = 48-40-40-120
# samplename = Test crystal
# sampletype = crystal
# samplemosaic = 30.000000
# latticeconstants = 11.973000,8.626000,14.340000,90.000000,97.470000,90.000000
# ubmatrix = -0.074543,0.053990,-0.008092,-0.039231,-0.102589,-0.004259,-0.000001,-0.000000,0.069735
# mode = 0
# plane_normal = -0.000007,-0.000006,1.000000
# ubconf = 
# preset_type = normal 
# preset_channel = time
# preset_value = 1.000000
# def_x = e
# def_y = detector
# col_headers = 
#   Pt.          h          k          l          e       time    monitor   detector focal_length         m1         m2     mfocus         s1         s2        sgl        sgu        stl        stu         a1         a2          q         ei         ef
      1     1.0005     0.9996    -0.0000    -0.0043      1.000   5063.000    206.000    66.8353   159.4198   -41.1711   -43.0418   -72.0227    19.4613    -0.0005    -0.0013     0.0000     0.0001   159.4178   -41.1648     0.9003    14.6967    14.701
      2     0.9994     1.0006     0.0000     1.0055      1.000   5231.000    219.000    64.5851   160.1155   -39.7728   -44.0928   -66.6292    19.0494     0.0001    -0.0004     0.0000     0.0001   159.4159   -41.1704     0.9006    15.7026    14.697
      3     0.9996     1.0004     0.0000     2.0040      1.000   5176.000    206.000    62.8621   160.7336   -38.5139   -44.9329   -61.4286    18.4817    -0.0004    -0.0002     0.0000     0.0001   159.4168   -41.1665     0.9005    16.7038    14.699
      4     1.0003     0.9998     0.0000     2.9978      1.000   4908.000    198.000    60.9761   161.3178   -37.3726   -45.8900   -56.3430    17.7785     0.0004    -0.0003     0.0000     0.0001   159.4169   -41.1626     0.9004    17.7003    14.702
      5     0.9998     0.9999     0.0000     4.0002      1.000   5238.000    184.000    59.1690   161.8388   -36.3252   -46.8460   -51.3102    16.9422    -0.0002    -0.0005     0.0000     0.0001   159.4175   -41.1681     0.9003    18.6989    14.698
      6     1.0004     0.9995    -0.0000     4.9956      1.000   5261.000    200.000    57.7275   162.3136   -35.3588   -47.6378   -46.2605    15.9749     0.0006    -0.0009     0.0000     0.0001   159.4166   -41.1596     0.9002    19.7001    14.704
      7     1.0007     0.9991     0.0000     5.9903      1.000   5233.000    222.000    56.2508   162.7633   -34.4711   -48.4770   -41.1238    14.8682    -0.0001    -0.0001     0.0000     0.0001   159.4167   -41.1593     0.9001    20.6950    14.704
      8     1.0003     0.9990     0.0000     6.9915      1.000   5200.000    186.000    54.9773   163.1846   -33.6408   -49.2249   -35.7961    13.5901     0.0012    -0.0005     0.0000     0.0001   159.4172   -41.1570     0.8999    21.6978    14.706
      9     1.0000     0.9999    -0.0000     7.9994      1.000   5172.000    212.000    53.7967   163.5708   -32.8683   -49.9391   -30.1475    12.1188     0.0000    -0.0011     0.0000     0.0001   159.4169   -41.1656     0.9003    22.6999    14.700
     10     0.9999     1.0002    -0.0000     9.0018      1.000   5278.000    195.000    52.5495   163.9260   -32.1476   -50.7166   -23.9419    10.3738     0.0003    -0.0012     0.0000     0.0001   159.4170   -41.1678     0.9005    23.7007    14.698
     11     0.9998     1.0003     0.0000    10.0039      1.000   5113.000    199.000    51.5807   164.2582   -31.4693   -51.3373   -16.7122     8.1972     0.0002    -0.0005     0.0000     0.0001   159.4162   -41.1628     0.9005    24.7062    14.702
# Sum of Counts = 2227
# Center of Mass = 4.954257+/-0.162997
# Full Width Half-Maximum = 6.349147+/-0.149263
# 9:47:48 AM  10/2/2006   scan completed.
8:29:08 PM  10/3/2006    Executing "drive s1 34.000"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      34.00000
Drive completed.

9:02:59 PM  10/3/2006    Executing "drive s1 0.000"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      0.00000
Drive completed.

10:48:09 PM  10/3/2006    Executing "drive s1 50.000"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      50.00000
Drive completed.

6:20:54 AM  10/4/2006    Executing "drive s1 0.000"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      0.00000
Drive completed.

11:15:29 AM  10/4/2006    Executing "drive s1 50.000"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      50.00000
Drive completed.

11:33:23 AM  10/10/2006    Executing "comment "The current s2 value is @(s2)""
COMMENT:
The current s2 value is 8.197209

11:33:41 AM  10/10/2006    Executing "scan s1 @(s1)-1 @(s1)+1 0.100000"
                           Derived from "center s1"

# scan = 19
# date = 10/10/2006
# time = 11:33:41 AM
# experiment = Inelastic neutron scattering from something
# experiment_number = 1
# command = center s1
# builtin_command = scan s1 @(s1)-1 @(s1)+1 0.100000
# users = M. Lumsden, L. Robertson, M. Yethiraj
# local_contact = All of us
# scan_title = 
# monochromator = PG002
# analyzer = Pg002
# sense = -+-
# collimation = 48-40-40-120
# samplename = Test crystal
# sampletype = crystal
# samplemosaic = 30.000000
# latticeconstants = 11.973000,8.626000,14.340000,90.000000,97.470000,90.000000
# ubmatrix = -0.074543,0.053990,-0.008092,-0.039231,-0.102589,-0.004259,-0.000001,-0.000000,0.069735
# mode = 0
# plane_normal = -0.000007,-0.000006,1.000000
# ubconf = 
# preset_type = normal 
# preset_channel = time
# preset_value = 60.000000
# def_x = s1
# def_y = detector
# col_headers = 
#   Pt.         s1       time    monitor   detector focal_length         m1         m2     mfocus         s2        sgl        sgu        stl        stu         a1         a2          q          h          k          l         ei         ef          e
      1    48.9996     12.829  64171.000   2613.000    51.5807   164.2582   -31.4693   -51.3373     8.1972     0.0002    -0.0005     0.0000     0.0001   159.4162   -41.1628     0.9005     1.6661    -0.2507     0.0000    24.7062    14.7023    10.003
# Sum of Counts = 2613
# Center of Mass = 48.999600+/-1.355620
# Full Width Half-Maximum = 0.000000+/-NaN
# 11:33:54 AM  10/10/2006   scan stopped!!
Abort issued!!
11:33:59 AM  10/10/2006    Executing "preset time 1"

Setting the default preset channel to:  time
and the default preset value to:  1.000000

11:34:03 AM  10/10/2006    Executing "scan s1 @(s1)-1 @(s1)+1 0.100000"
                           Derived from "center s1"

# scan = 20
# date = 10/10/2006
# time = 11:34:03 AM
# experiment = Inelastic neutron scattering from something
# experiment_number = 1
# command = center s1
# builtin_command = scan s1 @(s1)-1 @(s1)+1 0.100000
# users = M. Lumsden, L. Robertson, M. Yethiraj
# local_contact = All of us
# scan_title = 
# monochromator = PG002
# analyzer = Pg002
# sense = -+-
# collimation = 48-40-40-120
# samplename = Test crystal
# sampletype = crystal
# samplemosaic = 30.000000
# latticeconstants = 11.973000,8.626000,14.340000,90.000000,97.470000,90.000000
# ubmatrix = -0.074543,0.053990,-0.008092,-0.039231,-0.102589,-0.004259,-0.000001,-0.000000,0.069735
# mode = 0
# plane_normal = -0.000007,-0.000006,1.000000
# ubconf = 
# preset_type = normal 
# preset_channel = time
# preset_value = 1.000000
# def_x = s1
# def_y = detector
# col_headers = 
#   Pt.         s1       time    monitor   detector focal_length         m1         m2     mfocus         s2        sgl        sgu        stl        stu         a1         a2          q          h          k          l         ei         ef          e
      1    47.9994      1.000   5089.000    219.000    51.5807   164.2582   -31.4693   -51.3373     8.1972     0.0002    -0.0005     0.0000     0.0001   159.4162   -41.1628     0.9005     1.6718    -0.2296     0.0000    24.7062    14.7023    10.003
      2    48.0995      1.000   5139.000    215.000    51.5807   164.2582   -31.4693   -51.3373     8.1972     0.0002    -0.0005     0.0000     0.0001   159.4162   -41.1628     0.9005     1.6713    -0.2317     0.0000    24.7062    14.7023    10.003
      3    48.2002      1.000   5216.000    207.000    51.5807   164.2582   -31.4693   -51.3373     8.1972     0.0002    -0.0005     0.0000     0.0001   159.4162   -41.1628     0.9005     1.6707    -0.2338     0.0000    24.7062    14.7023    10.003
      4    48.2988      1.000   5414.000    217.000    51.5807   164.2582   -31.4693   -51.3373     8.1972     0.0002    -0.0005     0.0000     0.0001   159.4162   -41.1628     0.9005     1.6702    -0.2359     0.0000    24.7062    14.7023    10.003
      5    48.4001      1.000   5009.000    204.000    51.5807   164.2582   -31.4693   -51.3373     8.1972     0.0002    -0.0005     0.0000     0.0001   159.4162   -41.1628     0.9005     1.6696    -0.2381     0.0000    24.7062    14.7023    10.003
      6    48.4991      1.000   5192.000    200.000    51.5807   164.2582   -31.4693   -51.3373     8.1972     0.0002    -0.0005     0.0000     0.0001   159.4162   -41.1628     0.9005     1.6690    -0.2402     0.0000    24.7062    14.7023    10.003
      7    48.5998      1.000   4936.000    186.000    51.5807   164.2582   -31.4693   -51.3373     8.1972     0.0002    -0.0005     0.0000     0.0001   159.4162   -41.1628     0.9005     1.6684    -0.2423     0.0000    24.7062    14.7023    10.003
      8    48.6996      1.000   5106.000    185.000    51.5807   164.2582   -31.4693   -51.3373     8.1972     0.0002    -0.0005     0.0000     0.0001   159.4162   -41.1628     0.9005     1.6678    -0.2444     0.0000    24.7062    14.7023    10.003
      9    48.8008      1.000   5064.000    198.000    51.5807   164.2582   -31.4693   -51.3373     8.1972     0.0002    -0.0005     0.0000     0.0001   159.4162   -41.1628     0.9005     1.6672    -0.2465     0.0000    24.7062    14.7023    10.003
     10    48.8995      1.000   4974.000    179.000    51.5807   164.2582   -31.4693   -51.3373     8.1972     0.0002    -0.0005     0.0000     0.0001   159.4162   -41.1628     0.9005     1.6667    -0.2486     0.0000    24.7062    14.7023    10.003
     11    48.9982      1.000   5136.000    222.000    51.5807   164.2582   -31.4693   -51.3373     8.1972     0.0002    -0.0005     0.0000     0.0001   159.4162   -41.1628     0.9005     1.6661    -0.2507     0.0000    24.7062    14.7023    10.003
     12    49.0993      1.000   5108.000    197.000    51.5807   164.2582   -31.4693   -51.3373     8.1972     0.0002    -0.0005     0.0000     0.0001   159.4162   -41.1628     0.9005     1.6655    -0.2528     0.0000    24.7062    14.7023    10.003
     13    49.2013      1.000   5224.000    210.000    51.5807   164.2582   -31.4693   -51.3373     8.1972     0.0002    -0.0005     0.0000     0.0001   159.4162   -41.1628     0.9005     1.6648    -0.2550     0.0000    24.7062    14.7023    10.003
     14    49.3003      1.000   5218.000    206.000    51.5807   164.2582   -31.4693   -51.3373     8.1972     0.0002    -0.0005     0.0000     0.0001   159.4162   -41.1628     0.9005     1.6642    -0.2571     0.0000    24.7062    14.7023    10.003
     15    49.3998      1.000   5266.000    211.000    51.5807   164.2582   -31.4693   -51.3373     8.1972     0.0002    -0.0005     0.0000     0.0001   159.4162   -41.1628     0.9005     1.6636    -0.2592     0.0000    24.7062    14.7023    10.003
     16    49.5001      1.000   5049.000    192.000    51.5807   164.2582   -31.4693   -51.3373     8.1972     0.0002    -0.0005     0.0000     0.0001   159.4162   -41.1628     0.9005     1.6630    -0.2613     0.0000    24.7062    14.7023    10.003
     17    49.5997      1.000   5152.000    208.000    51.5807   164.2582   -31.4693   -51.3373     8.1972     0.0002    -0.0005     0.0000     0.0001   159.4162   -41.1628     0.9005     1.6624    -0.2634     0.0000    24.7062    14.7023    10.003
     18    49.6993      1.000   5077.000    192.000    51.5807   164.2582   -31.4693   -51.3373     8.1972     0.0002    -0.0005     0.0000     0.0001   159.4162   -41.1628     0.9005     1.6617    -0.2655     0.0000    24.7062    14.7023    10.003
     19    49.8000      1.000   4977.000    187.000    51.5807   164.2582   -31.4693   -51.3373     8.1972     0.0002    -0.0005     0.0000     0.0001   159.4162   -41.1628     0.9005     1.6611    -0.2676     0.0000    24.7062    14.7023    10.003
     20    49.8988      1.000   4925.000    198.000    51.5807   164.2582   -31.4693   -51.3373     8.1972     0.0002    -0.0005     0.0000     0.0001   159.4162   -41.1628     0.9005     1.6604    -0.2697     0.0000    24.7062    14.7023    10.003
     21    49.9997      1.000   5185.000    197.000    51.5807   164.2582   -31.4693   -51.3373     8.1972     0.0002    -0.0005     0.0000     0.0001   159.4162   -41.1628     0.9005     1.6598    -0.2718     0.0000    24.7062    14.7023    10.003
# Sum of Counts = 4230
# Center of Mass = 48.987404+/-1.065236
# Full Width Half-Maximum = 1.217592+/-0.468203
# 11:34:35 AM  10/10/2006   scan completed.
11:34:35 AM  10/10/2006    Executing "drive s1 @(com)"
                           Derived from "center s1"
Error in reading the global variable "COM".

11:37:29 AM  10/10/2006    Executing "comment "@(com)""
Error processing: comment "@(com)"
Error in reading the global variable "COM".

11:39:33 AM  10/10/2006    Executing "comment "@(com)""
Error processing: comment "@(com)"
Error in reading the global variable "COM".

11:40:12 AM  10/10/2006    Executing "comment "@(s2.zero)""
COMMENT:
-0.811128

11:40:41 AM  10/10/2006    Executing "comment "@(s2.motorunits)""
COMMENT:
deg

11:42:16 AM  10/10/2006    Executing "comment "@(com)""
Error processing: comment "@(com)"
Error in opening the global file "<Not A Path>".

11:42:48 AM  10/10/2006    Executing "comment "@(com)""
COMMENT:
48.987404

3:15:42 PM  10/18/2006    Executing "drive s1 1+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      6.00000
Drive completed.

3:15:48 PM  10/18/2006    Executing "drive s1 2+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      7.00000
Drive completed.

3:15:49 PM  10/18/2006    Executing "drive s1 3+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      8.00000
Drive completed.

3:15:49 PM  10/18/2006    Executing "drive s1 4+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      9.00000
Drive completed.

3:15:50 PM  10/18/2006    Executing "drive s1 5+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      10.00000
Drive completed.

3:15:51 PM  10/18/2006    Executing "drive s1 6+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      11.00000
Drive completed.

3:15:51 PM  10/18/2006    Executing "drive s1 7+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      12.00000
Drive completed.

3:15:52 PM  10/18/2006    Executing "drive s1 8+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      13.00000
Drive completed.

3:15:52 PM  10/18/2006    Executing "drive s1 9+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      14.00000
Drive completed.

3:15:53 PM  10/18/2006    Executing "drive s1 10+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      15.00000
Drive completed.

3:15:54 PM  10/18/2006    Executing "drive s1 11+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      16.00000
Drive completed.

3:15:54 PM  10/18/2006    Executing "drive s1 12+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      17.00000
Drive completed.

3:15:55 PM  10/18/2006    Executing "drive s1 13+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      18.00000
Drive completed.

3:15:56 PM  10/18/2006    Executing "drive s1 14+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      19.00000
Drive completed.

3:15:56 PM  10/18/2006    Executing "drive s1 15+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      20.00000
Drive completed.

3:15:57 PM  10/18/2006    Executing "drive s1 16+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      21.00000
Drive completed.

3:15:57 PM  10/18/2006    Executing "drive s1 17+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      22.00000
Drive completed.

3:15:58 PM  10/18/2006    Executing "drive s1 18+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      23.00000
Drive completed.

3:15:59 PM  10/18/2006    Executing "drive s1 19+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      24.00000
Drive completed.

3:15:59 PM  10/18/2006    Executing "drive s1 20+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      25.00000
Drive completed.

3:16:15 PM  10/18/2006    Executing "drive s1 41+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      46.00000
Drive completed.

3:16:18 PM  10/18/2006    Executing "drive s1 42+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      47.00000
Drive completed.

3:16:18 PM  10/18/2006    Executing "drive s1 43+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      48.00000
Drive completed.

3:16:19 PM  10/18/2006    Executing "drive s1 44+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      49.00000
Drive completed.

3:16:20 PM  10/18/2006    Executing "drive s1 45+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      50.00000
Drive completed.

3:16:20 PM  10/18/2006    Executing "drive s1 46+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      51.00000
Drive completed.

3:16:21 PM  10/18/2006    Executing "drive s1 47+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      52.00000
Drive completed.

3:16:21 PM  10/18/2006    Executing "drive s1 48+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      53.00000
Drive completed.

3:16:22 PM  10/18/2006    Executing "drive s1 49+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      54.00000
Drive completed.

3:16:23 PM  10/18/2006    Executing "drive s1 50+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      55.00000
Drive completed.

3:16:23 PM  10/18/2006    Executing "drive s1 51+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      56.00000
Drive completed.

3:16:24 PM  10/18/2006    Executing "drive s1 52+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      57.00000
Drive completed.

3:16:24 PM  10/18/2006    Executing "drive s1 53+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      58.00000
Drive completed.

3:16:25 PM  10/18/2006    Executing "drive s1 54+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      59.00000
Drive completed.

3:16:26 PM  10/18/2006    Executing "drive s1 55+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      60.00000
Drive completed.

3:16:26 PM  10/18/2006    Executing "drive s1 56+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      61.00000
Drive completed.

3:16:27 PM  10/18/2006    Executing "drive s1 57+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      62.00000
Drive completed.

3:16:28 PM  10/18/2006    Executing "drive s1 58+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      63.00000
Drive completed.

3:16:28 PM  10/18/2006    Executing "drive s1 59+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      64.00000
Drive completed.

3:16:29 PM  10/18/2006    Executing "drive s1 60+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      65.00000
Drive completed.

3:16:30 PM  10/18/2006    Executing "drive s1 61+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      66.00000
Drive completed.

3:16:30 PM  10/18/2006    Executing "drive s1 62+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      67.00000
Drive completed.

3:16:31 PM  10/18/2006    Executing "drive s1 63+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      68.00000
Drive completed.

3:16:32 PM  10/18/2006    Executing "drive s1 64+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      69.00000
Drive completed.

3:16:32 PM  10/18/2006    Executing "drive s1 65+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      70.00000
Drive completed.

3:16:33 PM  10/18/2006    Executing "drive s1 66+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      71.00000
Drive completed.

3:16:33 PM  10/18/2006    Executing "drive s1 67+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      72.00000
Drive completed.

3:16:34 PM  10/18/2006    Executing "drive s1 68+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      73.00000
Drive completed.

3:16:35 PM  10/18/2006    Executing "drive s1 69+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      74.00000
Drive completed.

3:16:35 PM  10/18/2006    Executing "drive s1 70+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      75.00000
Drive completed.

3:16:36 PM  10/18/2006    Executing "drive s1 71+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      76.00000
Drive completed.

3:16:36 PM  10/18/2006    Executing "drive s1 72+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      77.00000
Drive completed.

3:16:37 PM  10/18/2006    Executing "drive s1 73+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      78.00000
Drive completed.

3:16:38 PM  10/18/2006    Executing "drive s1 74+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      79.00000
Drive completed.

3:16:38 PM  10/18/2006    Executing "drive s1 75+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      80.00000
Drive completed.

3:16:39 PM  10/18/2006    Executing "drive s1 76+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      81.00000
Drive completed.

3:16:39 PM  10/18/2006    Executing "drive s1 77+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      82.00000
Drive completed.

3:16:40 PM  10/18/2006    Executing "drive s1 78+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      83.00000
Drive completed.

3:16:41 PM  10/18/2006    Executing "drive s1 79+5"
Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      84.00000
Drive completed.

3:16:42 PM  10/18/2006    Executing "drive s1 80+5"

Driving to the following position: ""
Destination Motor Positions:
motor        position
s1      85.00000
Drive aborted!!

Final Motor Positions:
motor        position
s1      83.99962

Abort issued!!
5:32:24 PM  10/25/2006    Executing "begin"
The "begin" new experiment command was timed out.
11:26:10 AM  10/26/2006    Executing "calc m2 -28"

11:26:24 AM  10/26/2006    Executing "calc ei 40"
Calculating motor positions based on:
ei=40.00000     
Resulting calculated motor positions:
m2=0.00000     m1=180.00000     mfocus=-65.00000     
NOTE: Any values not explicitly specified will be read from the current motor positions.

11:26:57 AM  10/26/2006    Executing "drive ei 40"
Driving to the following position: ""
Destination Motor Positions:
motor        position
m2      0.00000
m1      180.00000
mfocus      -65.00000
Drive completed.

11:27:12 AM  10/26/2006    Executing "calc m2 -28"

11:27:32 AM  10/26/2006    Executing "calc ei 40 h 1 k 0 l 0"
Error in "calc" command ... Cannot complete scattering triangle.
"calc" command syntax:
calc h= k= l= e= ei= ef= 
(or any subset)
OR
calc motors
11:27:39 AM  10/26/2006    Executing "calc ei 40 h 1 k 0 l 0 ef 40"
Calculating motor positions based on:
ei=40.00000     h=1.00000     k=0.00000     l=0.00000     ef=40.00000     
Resulting calculated motor positions:
m2=-24.61115     m1=167.69443     a2=-24.61115     a1=167.69443     s2=6.90624     s1=-24.30378     sgl=0.00041     sgu=-0.00035     mfocus=-59.69981     
NOTE: Any values not explicitly specified will be read from the current motor positions.

11:27:50 AM  10/26/2006    Executing "calc ei 30 h 1 k 0 l 0 ef 40"
Error in "calc" command ... Cannot complete scattering triangle.
"calc" command syntax:
calc h= k= l= e= ei= ef= 
(or any subset)
OR
calc motors
11:27:55 AM  10/26/2006    Executing "calc ei 30 h 1 k 0 l 0 ef 30"
Calculating motor positions based on:
ei=30.00000     h=1.00000     k=0.00000     l=0.00000     ef=30.00000     
Resulting calculated motor positions:
m2=-28.49323     m1=165.75338     a2=-28.49323     a1=165.75338     s2=7.97626     s1=-23.76877     sgl=0.00041     sgu=-0.00035     mfocus=-54.66818     
NOTE: Any values not explicitly specified will be read from the current motor positions.

11:29:10 AM  10/26/2006    Executing "monochromator be002"
ERROR - The argument of the "monochromator" command, "be002" was not evaluated as a valid monochromator name.  
The currently available monochromator names and there corresponding d-spacings are:
Monochromator       d-spacing
       PG002          3.3550
       BE110          1.5000
       Si111          3.1350
       Ge111          3.2670

11:29:10 AM  10/26/2006    Executing "calc ei 30 h 1 k 0 l 0 ef 30"
                           Derived from "monochromator be002; calc ei 30 h 1 k 0 l 0 ef 30"
Calculating motor positions based on:
ei=30.00000     h=1.00000     k=0.00000     l=0.00000     ef=30.00000     
Resulting calculated motor positions:
m2=-28.49323     m1=165.75338     a2=-28.49323     a1=165.75338     s2=7.97626     s1=-23.76877     sgl=0.00041     sgu=-0.00035     mfocus=-54.66818     
NOTE: Any values not explicitly specified will be read from the current motor positions.

11:37:06 AM  10/26/2006    Executing "monochromator 1.792"
ERROR - The argument of the "monochromator" command, "1.792000" was not evaluated as a valid monochromator name.  
The currently available monochromator names and there corresponding d-spacings are:
Monochromator       d-spacing
       PG002          3.3550
       BE110          1.5000
       Si111          3.1350
       Ge111          3.2670

11:37:14 AM  10/26/2006    Executing "help monochromator"
The monochromator command sets the d-spacing of the monochromator based on 
definitions stored in the configuration file.
The syntax for the monochromator command is:
    monochromator name
where "name" must be defined with a corresponding d-spacing in the 
configuration file.

11:37:58 AM  10/26/2006    Executing "monochromator be002"
ERROR - The argument of the "monochromator" command, "be002" was not evaluated as a valid monochromator name.  
The currently available monochromator names and there corresponding d-spacings are:
Monochromator       d-spacing
       PG002          3.3550
       BE110          1.5000
       Si111          3.1350
       Ge111          3.2670

11:37:58 AM  10/26/2006    Executing "calc ei 30 h 1 k 0 l 0 ef 30"
                           Derived from "monochromator be002; calc ei 30 h 1 k 0 l 0 ef 30"
Calculating motor positions based on:
ei=30.00000     h=1.00000     k=0.00000     l=0.00000     ef=30.00000     
Resulting calculated motor positions:
m2=-28.49323     m1=165.75338     a2=-28.49323     a1=165.75338     s2=7.97626     s1=-23.76877     sgl=0.00041     sgu=-0.00035     mfocus=-54.66818     
NOTE: Any values not explicitly specified will be read from the current motor positions.

11:38:07 AM  10/26/2006    Executing "initialize"
Reinitializing experiment ...  Completed initialization.
11:41:31 AM  10/26/2006    Executing "monochromator be002"
ERROR - The argument of the "monochromator" command, "be002" was not evaluated as a valid monochromator name.  
The currently available monochromator names and there corresponding d-spacings are:
Monochromator       d-spacing
       PG002          3.3550
       BE110          1.5000
       Si111          3.1350
       Ge111          3.2670

11:41:31 AM  10/26/2006    Executing "calc ei 30 h 1 k 0 l 0 ef 30"
                           Derived from "monochromator be002; calc ei 30 h 1 k 0 l 0 ef 30"
Calculating motor positions based on:
ei=30.00000     h=1.00000     k=0.00000     l=0.00000     ef=30.00000     
Resulting calculated motor positions:
m2=-28.49323     m1=165.75338     a2=-28.49323     a1=165.75338     s2=7.97626     s1=-23.76877     sgl=0.00041     sgu=-0.00035     mfocus=-54.66818     
NOTE: Any values not explicitly specified will be read from the current motor positions.

11:41:51 AM  10/26/2006    Executing "initialize"
Reinitializing experiment ...  Completed initialization.
11:42:02 AM  10/26/2006    Executing "monochromator be002"
ERROR - The argument of the "monochromator" command, "be002" was not evaluated as a valid monochromator name.  
The currently available monochromator names and there corresponding d-spacings are:
Monochromator       d-spacing
       PG002          3.3550
       BE110          1.5000
       Si111          3.1350
       Ge111          3.2670

11:42:02 AM  10/26/2006    Executing "calc ei 30 h 1 k 0 l 0 ef 30"
                           Derived from "monochromator be002; calc ei 30 h 1 k 0 l 0 ef 30"
Calculating motor positions based on:
ei=30.00000     h=1.00000     k=0.00000     l=0.00000     ef=30.00000     
Resulting calculated motor positions:
m2=-28.49323     m1=165.75338     a2=-28.49323     a1=165.75338     s2=7.97626     s1=-23.76877     sgl=0.00041     sgu=-0.00035     mfocus=-54.66818     
NOTE: Any values not explicitly specified will be read from the current motor positions.

11:42:45 AM  10/26/2006    Executing "monochromator be002"
ERROR - The argument of the "monochromator" command, "be002" was not evaluated as a valid monochromator name.  
The currently available monochromator names and there corresponding d-spacings are:
Monochromator       d-spacing
       PG002          3.3550
       BE110          1.5000
       Si111          3.1350
       Ge111          3.2670

11:42:45 AM  10/26/2006    Executing "calc ei 30 h 1 k 0 l 0 ef 30"
                           Derived from "monochromator be002; calc ei 30 h 1 k 0 l 0 ef 30"
Calculating motor positions based on:
ei=30.00000     h=1.00000     k=0.00000     l=0.00000     ef=30.00000     
Resulting calculated motor positions:
m2=-28.49323     m1=165.75338     a2=-28.49323     a1=165.75338     s2=7.97626     s1=-23.76877     sgl=0.00041     sgu=-0.00035     mfocus=-54.66818     
NOTE: Any values not explicitly specified will be read from the current motor positions.

11:44:41 AM  10/26/2006    Executing "initialize"
Reinitializing experiment ...  Completed initialization.
11:44:51 AM  10/26/2006    Executing "monochromator be002"
Setting the monochromator to BE002 with a d-spacing of 1.7920 Angstroms.
11:44:51 AM  10/26/2006    Executing "calc ei 30 h 1 k 0 l 0 ef 30"
                           Derived from "monochromator be002; calc ei 30 h 1 k 0 l 0 ef 30"
Calculating motor positions based on:
ei=30.00000     h=1.00000     k=0.00000     l=0.00000     ef=30.00000     
Resulting calculated motor positions:
m2=-54.87018     m1=152.56491     a2=-28.49323     a1=165.75338     s2=7.97626     s1=-23.76877     sgl=0.00041     sgu=-0.00035     mfocus=-35.29944     
NOTE: Any values not explicitly specified will be read from the current motor positions.

11:45:05 AM  10/26/2006    Executing "monochromator be002"
Setting the monochromator to BE002 with a d-spacing of 1.7920 Angstroms.
11:45:05 AM  10/26/2006    Executing "calc ei 80 h 1 k 0 l 0 ef 80"
                           Derived from "monochromator be002; calc ei 80 h 1 k 0 l 0 ef 80"
Calculating motor positions based on:
ei=80.00000     h=1.00000     k=0.00000     l=0.00000     ef=80.00000     
Resulting calculated motor positions:
m2=-32.77672     m1=163.61164     a2=-17.33527     a1=171.33236     s2=4.88197     s1=-25.31591     sgl=0.00041     sgu=-0.00035     mfocus=-50.05532     
NOTE: Any values not explicitly specified will be read from the current motor positions.

11:45:13 AM  10/26/2006    Executing "monochromator be002"
Setting the monochromator to BE002 with a d-spacing of 1.7920 Angstroms.
11:45:13 AM  10/26/2006    Executing "calc ei 100 h 1 k 0 l 0 ef 80"
                           Derived from "monochromator be002; calc ei 100 h 1 k 0 l 0 ef 80"
Error in "calc" command ... Cannot complete scattering triangle.
"calc" command syntax:
calc h= k= l= e= ei= ef= 
(or any subset)
OR
calc motors
11:45:19 AM  10/26/2006    Executing "monochromator be002"
Setting the monochromator to BE002 with a d-spacing of 1.7920 Angstroms.
11:45:19 AM  10/26/2006    Executing "calc ei 100 h 1 k 0 l 0 ef 100"
                           Derived from "monochromator be002; calc ei 100 h 1 k 0 l 0 ef 100"
Calculating motor positions based on:
ei=100.00000     h=1.00000     k=0.00000     l=0.00000     ef=100.00000     
Resulting calculated motor positions:
m2=-29.23437     m1=165.38282     a2=-15.49323     a1=172.25339     s2=4.36631     s1=-25.57375     sgl=0.00041     sgu=-0.00035     mfocus=-53.80667     
NOTE: Any values not explicitly specified will be read from the current motor positions.

11:45:37 AM  10/26/2006    Executing "monochromator be002"
Setting the monochromator to BE002 with a d-spacing of 1.7920 Angstroms.
11:45:37 AM  10/26/2006    Executing "calc ei 109 h 1 k 0 l 0 ef 100"
                           Derived from "monochromator be002; calc ei 109 h 1 k 0 l 0 ef 100"
Calculating motor positions based on:
ei=109.00000     h=1.00000     k=0.00000     l=0.00000     ef=100.00000     
Resulting calculated motor positions:
m2=-27.97576     m1=166.01212     a2=-15.49323     a1=172.25339     s2=3.48705     s1=9.27232     sgl=0.00041     sgu=-0.00035     mfocus=-55.28712     
NOTE: Any values not explicitly specified will be read from the current motor positions.

12:04:33 PM  11/7/2006    Executing "ef 14.700000"
Setting the final energy to 14.700meV and the configuration to "Fixed Ef".

12:04:33 PM  11/7/2006    Executing "plusminus - + -"
Setting the instrument configuration to:
1. (monochromator)   -1 +
2.        (sample)    1 +
3.      (analyzer)   -1 -

12:04:33 PM  11/7/2006    Executing "exptitle "Inelastic neutron scattering from something""
Setting the experiment title to:
Inelastic neutron scattering from something

12:04:34 PM  11/7/2006    Executing "collimation 48.000000 40.000000 40.000000 120.000000"
Setting the collimation to:
   source-monochromator:     48.000000
   monochromator-sample:     40.000000
        sample-analyzer:     40.000000
      analyzer-detector:    120.000000
12:04:34 PM  11/7/2006    Executing "monochromator be002"
Setting the monochromator to BE002 with a d-spacing of 1.7920 Angstroms.
12:04:34 PM  11/7/2006    Executing "analyzer pg002"
Setting the analyzer to Pg002 with a d-spacing of 3.3550 Angstroms.
12:04:39 PM  11/7/2006    Executing "ef 30.500000"
Setting the final energy to 30.500meV and the configuration to "Fixed Ef".

12:04:39 PM  11/7/2006    Executing "plusminus - + -"
Setting the instrument configuration to:
1. (monochromator)   -1 +
2.        (sample)    1 +
3.      (analyzer)   -1 -

12:04:39 PM  11/7/2006    Executing "exptitle "Inelastic neutron scattering from something""
Setting the experiment title to:
Inelastic neutron scattering from something

12:04:39 PM  11/7/2006    Executing "collimation 48.000000 40.000000 40.000000 120.000000"
Setting the collimation to:
   source-monochromator:     48.000000
   monochromator-sample:     40.000000
        sample-analyzer:     40.000000
      analyzer-detector:    120.000000
12:04:40 PM  11/7/2006    Executing "monochromator be002"
Setting the monochromator to BE002 with a d-spacing of 1.7920 Angstroms.
12:04:40 PM  11/7/2006    Executing "analyzer pg002"
Setting the analyzer to Pg002 with a d-spacing of 3.3550 Angstroms.


12:06:18 PM  11/7/2006    Executing "drive e 22"

Driving to the following position: ""

Destination Motor Positions:
motor        position
m2      0.00000
m1      180.00000
a2      -28.25382
a1      165.87309
mfocus      -65.00000

Drive completed.

12:06:39 PM  11/7/2006    Executing "drive ef 30.5 e 22"

Driving to the following position: ""

Destination Motor Positions:
motor        position
m2      0.00000
m1      180.00000
a2      -28.25382
a1      165.87309
mfocus      -65.00000

Drive completed.

9:41:34 AM  11/8/2006    Executing "calc ei 30.5"

Calculating motor positions based on:
ei=30.50000     

Resulting calculated motor positions:
m2=-54.38110     m1=152.80945     mfocus=-35.52178     

NOTE: Any values not explicitly specified will be read from the current motor positions.

9:41:42 AM  11/8/2006    Executing "calc ef 30.5"

Calculating motor positions based on:
ef=30.50000     

Resulting calculated motor positions:
a2=-28.25382     a1=165.87309     

NOTE: Any values not explicitly specified will be read from the current motor positions.

9:42:51 AM  11/8/2006    Executing "calc h 1 k 1 l 0 e 5"

Calculating motor positions based on:
h=1.00000     k=1.00000     l=0.00000     e=5.00000    
 
Resulting calculated motor positions:
m2=-50.11795     m1=154.94102     a2=-28.25382     a1=165.87309     s2=12.21618     s1=-56.12761     sgl=0.00041     sgu=-0.00035     mfocus=-37.60820     

NOTE: Any values not explicitly specified will be read from the current motor positions.

9:52:39 AM  11/8/2006    Executing "calc e 5 q 2"

Calculating motor positions based on:
e=5.00000     q=2.00000     

Resulting calculated motor positions:
m2=-50.11795     m1=154.94102     a2=-28.25382     a1=165.87309     s2=28.72497     mfocus=-37.60820     

NOTE: Any values not explicitly specified will be read from the current motor positions.

9:52:50 AM  11/8/2006    Executing "drive e 5 q 2"

Driving to the following position: ""

Destination Motor Positions:
motor        position
m2      -50.11795
m1      154.94102
a2      -28.25382
a1      165.87309
s2      28.72497
mfocus      -37.60820

Drive completed.

9:53:19 AM  11/8/2006    Executing "calc q 2 ei 25"

Calculating motor positions based on:
q=2.00000     ei=25.00000     

Resulting calculated motor positions:
m2=-60.62542     m1=149.68729     s2=31.25562     mfocus=-32.91058    
 
NOTE: Any values not explicitly specified will be read from the current motor positions.

9:53:27 AM  11/8/2006    Executing "drive q 2 ei 25"

Driving to the following position: ""

Destination Motor Positions:
motor        position
m2      -60.62542
m1      149.68729
s2      31.25562
mfocus      -32.91058

Drive completed.

9:53:41 AM  11/8/2006    Executing "drive q 2 ef 25"

Driving to the following position: ""

Destination Motor Positions:
motor        position
a2      -31.27911
a1      164.36044
s2      33.46420

Drive completed.

9:53:57 AM  11/8/2006    Executing "drive q 2 ef 25 ei 45"

Driving to the following position: ""

Destination Motor Positions:
motor        position
m2      -44.19644
m1      157.90178
a2      -31.27911
a1      164.36044
s2      23.08258
mfocus      -41.02462

Drive completed.

9:54:25 AM  11/8/2006    Executing "drive e 0"

Driving to the following position: ""

Destination Motor Positions:
motor        position
m2      -54.38110
m1      152.80945
a2      -28.25382
a1      165.87309
mfocus      -35.52178

Drive completed.

9:54:28 AM  11/8/2006    Executing "calc e 0"

Calculating motor positions based on:
e=0.00000     

Resulting calculated motor positions:
m2=-54.38110     m1=152.80945     a2=-28.25382     a1=165.87309     mfocus=-35.52178  
   
NOTE: Any values not explicitly specified will be read from the current motor positions.

9:54:32 AM  11/8/2006    Executing "calc e 0 ei 10"

Calculating motor positions based on:
e=0.00000     ei=10.00000     

Resulting calculated motor positions:
m2=-105.88499     m1=127.05751     a2=-50.45973     a1=154.77013     mfocus=-22.67543    
 
NOTE: Any values not explicitly specified will be read from the current motor positions.

9:54:39 AM  11/8/2006    Executing "calc e 0 ei 100"

Calculating motor positions based on:
e=0.00000     ei=100.00000     

Resulting calculated motor positions:
m2=-29.23437     m1=165.38282     a2=-15.49323     a1=172.25339     mfocus=-53.80667     

NOTE: Any values not explicitly specified will be read from the current motor positions.

9:54:45 AM  11/8/2006    Executing "calc e 0 ei 100 ef 30"

Error in "calc" command ... E, Ei, and Ef are all given but E doesn't equal Ei-Ef

"calc" command syntax:

calc h= k= l= e= ei= ef= 
(or any subset)
OR
calc motors

9:54:50 AM  11/8/2006    Executing "calc e 0 ei 100 ef 100"

Calculating motor positions based on:
e=0.00000     ei=100.00000     ef=100.00000     

Resulting calculated motor positions:
m2=-29.23437     m1=165.38282     a2=-15.49323     a1=172.25339     mfocus=-53.80667     

NOTE: Any values not explicitly specified will be read from the current motor positions.

9:54:56 AM  11/8/2006    Executing "calc ei 100 ef 100"

Calculating motor positions based on:
ei=100.00000     ef=100.00000     

Resulting calculated motor positions:
m2=-29.23437     m1=165.38282     a2=-15.49323     a1=172.25339     mfocus=-53.80667    
 
NOTE: Any values not explicitly specified will be read from the current motor positions.

9:54:58 AM  11/8/2006    Executing "calc ei 100 ef 10"

Calculating motor positions based on:
ei=100.00000     ef=10.00000     

Resulting calculated motor positions:
m2=-29.23437     m1=165.38282     a2=-50.45973     a1=154.77013     mfocus=-53.80667    
 
NOTE: Any values not explicitly specified will be read from the current motor positions.

9:55:04 AM  11/8/2006    Executing "drive ei 100 ef 10"

Driving to the following position: ""

Destination Motor Positions:
motor        position
m2      -29.23437
m1      165.38282
a2      -50.45973
a1      154.77013
mfocus      -53.80667

Drive completed.

9:55:21 AM  11/8/2006    Executing "calc ei 100"

Calculating motor positions based on:
ei=100.00000     

Resulting calculated motor positions:
m2=-29.23437     m1=165.38282     mfocus=-53.80667     

NOTE: Any values not explicitly specified will be read from the current motor positions.

9:55:26 AM  11/8/2006    Executing "calc ei 105"

Calculating motor positions based on:
ei=105.00000     

Resulting calculated motor positions:
m2=-28.51471     m1=165.74264     mfocus=-54.64281     

NOTE: Any values not explicitly specified will be read from the current motor positions.

9:55:29 AM  11/8/2006    Executing "calc ef 105"

Calculating motor positions based on:
ef=105.00000     

Resulting calculated motor positions:
a2=-15.11763     a1=172.44118     

NOTE: Any values not explicitly specified will be read from the current motor positions.

9:55:47 AM  11/8/2006    Executing "calc h 1 k 1 l 0 ei 30.5"

Error in "calc" command ... Cannot complete scattering triangle.

"calc" command syntax:
calc h= k= l= e= ei= ef= 
(or any subset)
OR
calc motors

9:55:52 AM  11/8/2006    Executing "calc h 1 k 1 l 0 ei 30.5 ef 30.5"

Calculating motor positions based on:
h=1.00000     k=1.00000     l=0.00000     ei=30.50000     ef=30.50000     

Resulting calculated motor positions:
m2=-54.38110     m1=152.80945     a2=-28.25382     a1=165.87309     s2=13.47756     s1=-75.01517     sgl=0.00041     sgu=-0.00035     mfocus=-35.52178     

NOTE: Any values not explicitly specified will be read from the current motor positions.

9:56:07 AM  11/8/2006    Executing "drive e 0"

Driving to the following position: ""

Destination Motor Positions:
motor        position
m2      -54.38110
m1      152.80945
a2      -28.25382
a1      165.87309
mfocus      -35.52178

Drive completed.

9:56:13 AM  11/8/2006    Executing "calc h 1 k 1 l 0 ei 30.5"

Calculating motor positions based on:
h=1.00000     k=1.00000     l=0.00000     ei=30.50000     

Resulting calculated motor positions:
m2=-54.38110     m1=152.80945     s2=13.47827     s1=-74.98959     sgl=0.00041     sgu=-0.00035     mfocus=-35.52178     

NOTE: Any values not explicitly specified will be read from the current motor positions.

9:56:19 AM  11/8/2006    Executing "calc h 1 k 1 l 0 ef 30.5"

Calculating motor positions based on:
h=1.00000     k=1.00000     l=0.00000     ef=30.50000     

Resulting calculated motor positions:
a2=-28.25382     a1=165.87309     s2=13.47734     s1=-75.00722     sgl=0.00041     sgu=-0.00035     

NOTE: Any values not explicitly specified will be read from the current motor positions.

9:56:28 AM  11/8/2006    Executing "calc h 1 k 1 l 0 ef 30.5 ei 10"

Error in "calc" command ... Cannot complete scattering triangle.

"calc" command syntax:

calc h= k= l= e= ei= ef= 
(or any subset)
OR
calc motors

9:56:31 AM  11/8/2006    Executing "calc h 1 k 1 l 0 ef 30.5 ei 100"

Error in "calc" command ... Cannot complete scattering triangle.

"calc" command syntax:

calc h= k= l= e= ei= ef= 
(or any subset)
OR
calc motors
9:56:34 AM  11/8/2006    Executing "calc h 1 k 1 l 0 ef 30.5 ei 40"

Calculating motor positions based on:
h=1.00000     k=1.00000     l=0.00000     ef=30.50000     ei=40.00000     

Resulting calculated motor positions:
m2=-47.03330     m1=156.48335     a2=-28.25382     a1=165.87309     s2=9.88397     s1=-38.75934     sgl=0.00041     sgu=-0.00035     mfocus=-39.30404     

NOTE: Any values not explicitly specified will be read from the current motor positions.

1:40:50 PM  11/10/2006    Executing "comment "value is asin(30*3.14159/180)""

COMMENT:
value is asin(30*3.14159/180)

1:41:14 PM  11/10/2006    Executing "drive s1 asin(30*3.14159/180)"

Driving to the following position: ""

Destination Motor Positions:
motor        position
s1      0.55107

Drive completed.

9:34:55 PM  12/6/2006    Executing "ef 14.700000"

Setting the final energy to 14.700meV and the configuration to "Fixed Ef".

9:34:56 PM  12/6/2006    Executing "plusminus - + -"

Setting the instrument configuration to:
1. (monochromator)   -1 +
2.        (sample)    1 +
3.      (analyzer)   -1 -

9:34:56 PM  12/6/2006    Executing "exptitle "Inelastic neutron scattering from something""

Setting the experiment title to:
Inelastic neutron scattering from something

9:34:56 PM  12/6/2006    Executing "collimation 48.000000 40.000000 40.000000 120.000000"

Setting the collimation to:
   source-monochromator:     48.000000
   monochromator-sample:     40.000000
        sample-analyzer:     40.000000
      analyzer-detector:    120.000000

9:34:56 PM  12/6/2006    Executing "monochromator pg002"

Setting the monochromator to PG002 with a d-spacing of 3.3550 Angstroms.

9:34:56 PM  12/6/2006    Executing "analyzer pg002"

Setting the analyzer to Pg002 with a d-spacing of 3.3550 Angstroms.

9:35:47 PM  12/6/2006    Executing "ubcalc file "C:\spice\spice_code_lv_801\Support_Files\User\User_TAS\exp1\UBConf\tmp\UB06Dec2006_93543PM.ini""

Setting the UB matrix using the configuration file "C:\spice\spice_code_lv_801\Support_Files\User\User_TAS\exp1\UBConf\tmp\UB06Dec2006_93543PM.ini".

The UB matrix was successfully generated using:

Scattering plane specified by:
 h1=1.000  k1=0.000  l1=0.000     h2=0.000  k2=1.000  l2=0.000

the single peak position:
h=2.0000  k=0.0000  l=0.0000     a1=36.7881     s2=-9.3614     s1=0.0004     sgl=-0.0003  Ei=14.6994  Ef=14.6989

and the following lattice parameters:
a=8.8900  b=8.8900  c=5.2000     alpha=90.0000  beta=90.0000  gamma=90.0000

Results of the new UB matrix:

Peak position as input:
           h            k            l           a1           s2           s1          sgl           Ei           Ef
      2.0000       0.0000       0.0000      36.7881      -9.3614       0.0004      -0.0003      14.6994      14.6989

Calculated angle positions using original h,k,l,Ei,Ef:
           h            k            l           Ei           Ef           a1           s2           s1          sgl           m2           m1
      2.0000       0.0000       0.0000      14.6994      14.6989     159.4161      30.7770     -12.3666       0.0004      -0.0003     -43.0584     -41.1671     159.4164

Calculated h,k,l positions using original angles:
           h            k            l           a1           s2           s1          sgl           Ei           Ef
     -0.5191       0.3299       0.0000      36.7881      -9.3614       0.0004      -0.0003      14.6994      14.6994

The orientation information has been stored in the file 'C:\spice\spice_code_lv_801\Support_Files\User\User_TAS\exp1\UBConf\UB06Dec2006_93547PM.ini'.

To restore the configuration to this state at a later time, type:
ubcalc file=C:\spice\spice_code_lv_801\Support_Files\User\User_TAS\exp1\UBConf\UB06Dec2006_93547PM.ini

9:35:55 PM  12/6/2006    Executing "ubcalc file "C:\spice\spice_code_lv_801\Support_Files\User\User_TAS\exp1\UBConf\tmp\UB06Dec2006_93553PM.ini""

Setting the UB matrix using the configuration file "C:\spice\spice_code_lv_801\Support_Files\User\User_TAS\exp1\UBConf\tmp\UB06Dec2006_93553PM.ini".

The UB matrix was successfully generated using:

Scattering plane specified by:
 h1=1.000  k1=0.000  l1=0.000     h2=0.000  k2=0.000  l2=1.000

the single peak position:
h=2.0000  k=0.0000  l=0.0000     a1=36.7881     s2=-9.3614     s1=0.0004     sgl=-0.0003  Ei=14.6994  Ef=14.6989

and the following lattice parameters:
a=8.8900  b=8.8900  c=5.2000     alpha=90.0000  beta=90.0000  gamma=90.0000

Results of the new UB matrix:

Peak position as input:
           h            k            l           a1           s2           s1          sgl           Ei           Ef
      2.0000       0.0000       0.0000      36.7881      -9.3614       0.0004      -0.0003      14.6994      14.6989

Calculated angle positions using original h,k,l,Ei,Ef:
           h            k            l           Ei           Ef           a1           s2           s1          sgl           m2           m1
      2.0000       0.0000       0.0000      14.6994      14.6989     159.4161      30.7770     -12.3666       0.0004      -0.0003     -43.0584     -41.1671     159.4164

Calculated h,k,l positions using original angles:
           h            k            l           a1           s2           s1          sgl           Ei           Ef
     -0.5191       0.0000       0.1930      36.7881      -9.3614       0.0004      -0.0003      14.6994      14.6994

The orientation information has been stored in the file 'C:\spice\spice_code_lv_801\Support_Files\User\User_TAS\exp1\UBConf\UB06Dec2006_93555PM.ini'.

To restore the configuration to this state at a later time, type:
ubcalc file=C:\spice\spice_code_lv_801\Support_Files\User\User_TAS\exp1\UBConf\UB06Dec2006_93555PM.ini

9:36:36 PM  12/6/2006    Executing "calc h 1 k 0 l 0 e 0"

Calculating motor positions based on:
h=1.00000     k=0.00000     l=0.00000     e=0.00000     

Resulting calculated motor positions:
m2=-41.16623     m1=159.41688     a2=-41.16623     a1=159.41688     s2=15.24869     s1=-20.13256     sgl=0.00041     sgu=-0.00035     mfocus=-43.05904     

NOTE: Any values not explicitly specified will be read from the current motor positions.

9:36:50 PM  12/6/2006    Executing "calc h 1 k 0 l 1 e 0"

Calculating motor positions based on:
h=1.00000     k=0.00000     l=1.00000     e=0.00000     

Resulting calculated motor positions:
m2=-41.16623     m1=159.41688     a2=-41.16623     a1=159.41688     s2=30.47033     s1=-72.19722     sgl=0.00041     sgu=-0.00035     mfocus=-43.05904     

NOTE: Any values not explicitly specified will be read from the current motor positions.

9:37:12 PM  12/6/2006    Executing "calc h 1 k 0 l 2 e 0"

Calculating motor positions based on:
h=1.00000     k=0.00000     l=2.00000     e=0.00000     

Resulting calculated motor positions:
m2=-41.16623     m1=159.41688     a2=-41.16623     a1=159.41688     s2=56.41404     s1=-73.24761     sgl=0.00041     sgu=-0.00035     mfocus=-43.05904     

NOTE: Any values not explicitly specified will be read from the current motor positions.

2:07:31 PM  12/15/2006    Executing "ubcalc file "C:\spice\spice_code_lv_801\Support_Files\User\User_TAS\exp1\UBConf\tmp\UB15Dec2006_20729PM.ini""

Setting the UB matrix using the configuration file "C:\spice\spice_code_lv_801\Support_Files\User\User_TAS\exp1\UBConf\tmp\UB15Dec2006_20729PM.ini".

The UB matrix was successfully generated using:

Scattering plane specified by:
 h1=1.000  k1=0.000  l1=0.000     h2=0.000  k2=0.000  l2=1.000

the single peak position:
h=2.0000  k=0.0000  l=0.0000     a1=36.7881     s2=-9.3614     s1=0.0004     sgl=-0.0003  Ei=14.6994  Ef=14.6989

and the following lattice parameters:
a=7.5935  b=16.3893  c=6.9696     alpha=90.0000  beta=119.3400  gamma=90.0000

Results of the new UB matrix:

Peak position as input:
           h            k            l           a1           s2           s1          sgl           Ei           Ef
      2.0000       0.0000       0.0000      36.7881      -9.3614       0.0004      -0.0003      14.6994      14.6989

Calculated angle positions using original h,k,l,Ei,Ef:
           h            k            l           Ei           Ef           a1           s2           s1          sgl           m2           m1
      2.0000       0.0000       0.0000      14.6994      14.6989     159.4161      41.7567      -6.8773       0.0004      -0.0003     -43.0584     -41.1671     159.4164
Calculated h,k,l positions using original angles:
           h            k            l           a1           s2           s1          sgl           Ei           Ef
     -0.5246       0.0000       0.2586      36.7881      -9.3614       0.0004      -0.0003      14.6994      14.6994

The orientation information has been stored in the file 'C:\spice\spice_code_lv_801\Support_Files\User\User_TAS\exp1\UBConf\UB15Dec2006_20731PM.ini'.
To restore the configuration to this state at a later time, type:
ubcalc file=C:\spice\spice_code_lv_801\Support_Files\User\User_TAS\exp1\UBConf\UB15Dec2006_20731PM.ini

2:07:57 PM  12/15/2006    Executing "calc h 1 k 0 l 0 e 0"
Calculating motor positions based on:
h=1.00000     k=0.00000     l=0.00000     e=0.00000     
Resulting calculated motor positions:
m2=-41.16623     m1=159.41688     a2=-41.16623     a1=159.41688     s2=20.52837     s1=-17.49271     sgl=0.00041     sgu=-0.00035     mfocus=-43.05904     
NOTE: Any values not explicitly specified will be read from the current motor positions.

2:08:44 PM  12/15/2006    Executing "drive h 1.000000 k 0.000000 l 1.000000 e 0.000000"
                          Derived from "br 1 0 1"
Driving to the following position: ""
Destination Motor Positions:
motor        position
m2      -41.16623
m1      159.41688
a2      -41.16623
a1      159.41688
s2      37.50326
s1      -40.77105
sgl      0.00041
sgu      -0.00035
mfocus      -43.05904
Drive completed.

2:09:20 PM  12/15/2006    Executing "calc h 1 k 0 l 1 e 0"
Calculating motor positions based on:
h=1.00000     k=0.00000     l=1.00000     e=0.00000     
Resulting calculated motor positions:
m2=-41.16623     m1=159.41688     a2=-41.16623     a1=159.41688     s2=37.50326     s1=-40.77105     sgl=0.00041     sgu=-0.00035     mfocus=-43.05904     
NOTE: Any values not explicitly specified will be read from the current motor positions.

2:45:47 PM  2/8/2007    Executing "ubcalc file "C:\spice\spice_code_lv_82\Support_Files\User\User_TAS\exp1\UBConf\tmp\UB08Feb2007_24545PM.ini""

Setting the UB matrix using the configuration file "C:\spice\spice_code_lv_82\Support_Files\User\User_TAS\exp1\UBConf\tmp\UB08Feb2007_24545PM.ini".

The UB matrix was successfully generated using:

Scattering plane specified by:
 h1=1.000  k1=0.000  l1=0.000     h2=0.000  k2=0.000  l2=1.000
the single peak position:
h=2.0000  k=0.0000  l=0.0000     s2=36.7881     s1=-9.3614     sgl=0.0004     sgu=-0.0003  Ei=14.6994  Ef=14.6989

and the following lattice parameters:
a=5.5000  b=6.7800  c=2.3500     alpha=90.0000  beta=90.0000  gamma=90.0000

Results of the new UB matrix:

Peak position as input:
           h            k            l           s2           s1          sgl          sgu           Ei           Ef
      2.0000       0.0000       0.0000      36.7881      -9.3614       0.0004      -0.0003      14.6994      14.6989

Calculated angle positions using original h,k,l,Ei,Ef:
           h            k            l           Ei           Ef           s2           s1          sgl          sgu           m2           a2
      2.0000       0.0000       0.0000      14.6994      14.6989      50.7984      -2.3566       0.0004      -0.0003     -43.0584     -41.1671     -41.1679

Calculated h,k,l positions using original angles:
           h            k            l           s2           s1          sgl          sgu           Ei           Ef
      1.4714       0.0000       0.0000      36.7881      -9.3614       0.0004      -0.0003      14.6994      14.6989


The orientation information has been stored in the file 'C:\spice\spice_code_lv_82\Support_Files\User\User_TAS\exp1\UBConf\UB08Feb2007_24547PM.ini'.
To restore the configuration to this state at a later time, type:

ubcalc file=C:\spice\spice_code_lv_82\Support_Files\User\User_TAS\exp1\UBConf\UB08Feb2007_24547PM.ini


2:46:01 PM  2/8/2007    Executing "drive h 1.000000 k 0.000000 l 0.000000 e 0.000000"
                        Derived from "br 1 0 0 "

Driving to the following position: ""

Destination Motor Positions:
motor        position
m2      -41.16623
a2      -41.16623
a1      159.41688
s2      24.76713
s1      -15.37334
sgl      0.00041
sgu      -0.00035
mfocus      -43.05904

Drive completed.


1:41:24 PM  2/13/2007    Executing "scan s1 rand1 s2 10 30 1 preset time 1"


# scan = 21
# date = 2/13/2007
# time = 1:41:24 PM
# experiment = Inelastic neutron scattering from something
# experiment_number = 1
# command = scan s1 rand1 s2 10 30 1 preset time 1
# builtin_command = scan s1 rand1 s2 10 30 1 preset time 1
# users = M. Lumsden, L. Robertson, M. Yethiraj
# local_contact = All of us
# scan_title = 
# monochromator = PG002
# analyzer = Pg002
# sense = -+-
# collimation = 48-40-40-120
# samplename = Test crystal
# sampletype = crystal
# samplemosaic = 30.000000
# latticeconstants = 5.500000,6.780000,2.350000,90.000000,90.000000,90.000000
# ubmatrix = -0.160897,0.000001,0.198179,-0.084677,0.000001,-0.376567,-0.000002,-0.147493,-0.000001
# mode = 0
# plane_normal = -0.000007,-0.000006,1.000000
# ubconf = 
# preset_type = normal 
# preset_channel = time
# preset_value = 1.000000
# def_x = s2
# def_y = detector
# col_headers = 
#   Pt.         s1         s2       time    monitor   detector focal_length         m1         m2     mfocus        sgl        sgu        stl        stu         a1         a2          q          h          k          l         ei         ef          e
      1  -152.9646     9.9981      1.000   5126.000    191.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   159.4159   -41.1663     0.4642    -0.2623     0.0000     0.1326    14.7006    14.6999     0.000
      2    78.2959    11.0019      1.000   5304.000    233.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   159.4159   -41.1663     0.5107    -0.0818     0.0000    -0.1878    14.7006    14.6999     0.000
      3  -141.1392    12.0020      1.000   5202.000    206.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   159.4159   -41.1663     0.5569    -0.2392     0.0000     0.1815    14.7006    14.6999     0.000
      4  -155.8348    12.9988      1.000   5179.000    206.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   159.4159   -41.1663     0.6030    -0.3705     0.0000     0.1606    14.7006    14.6999     0.000
      5    11.0478    14.0020      1.000   5152.000    218.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   159.4159   -41.1663     0.6493     0.4830     0.0000    -0.1280    14.7006    14.6999     0.000
      6    12.5633    14.9972      1.000   5085.000    196.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   159.4159   -41.1663     0.6952     0.5114     0.0000    -0.1409    14.7006    14.6999     0.000
      7  -122.9930    15.9958      1.000   5095.000    203.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   159.4159   -41.1663     0.7412    -0.1486     0.0000     0.2698    14.7006    14.6999     0.000
      8   -71.3958    17.0018      1.000   5277.000    225.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   159.4159   -41.1663     0.7875     0.4230     0.0000     0.2325    14.7006    14.6999     0.000
      9    73.6751    18.0015      1.000   5173.000    213.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   159.4159   -41.1663     0.8334    -0.0309     0.0000    -0.3114    14.7006    14.6999     0.000
     10   -87.1948    18.9979      1.000   5193.000    204.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   159.4159   -41.1663     0.8791     0.2765     0.0000     0.3068    14.7006    14.6999     0.000
     11   -14.6866    19.9998      1.000   5079.000    196.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   159.4159   -41.1663     0.9250     0.8086     0.0000    -0.0185    14.7006    14.6999     0.000
     12  -142.0062    21.0009      1.000   5183.000    199.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   159.4159   -41.1663     0.9708    -0.4844     0.0000     0.2983    14.7006    14.6999     0.000
     13    -4.4939    21.9988      1.000   5122.000    220.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   159.4159   -41.1663     1.0164     0.8694     0.0000    -0.0807    14.7006    14.6999     0.000
     14    29.1034    23.0020      1.000   5152.000    207.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   159.4159   -41.1663     1.0621     0.6533    -0.0000    -0.2826    14.7006    14.6999     0.000
     15  -186.0897    23.9984      1.000   5250.000    217.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   159.4159   -41.1663     1.1075    -0.9557     0.0000     0.0695    14.7006    14.6999     0.000
     16   165.0679    25.0001      1.000   5088.000    197.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   159.4159   -41.1663     1.1530    -1.0093     0.0000     0.0024    14.7006    14.6999     0.000
     17  -149.0678    26.0016      1.000   5117.000    210.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   159.4159   -41.1663     1.1984    -0.7328     0.0000     0.3207    14.7006    14.6999     0.000
     18   119.7817    26.9960      1.000   5080.000    209.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   159.4159   -41.1663     1.2434    -0.7566     0.0000    -0.3343    14.7006    14.6999     0.000
     19  -206.3063    27.9986      1.000   5058.000    210.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   159.4159   -41.1663     1.2887    -1.1011     0.0000    -0.1047    14.7006    14.6999     0.000
     20  -133.8974    28.9986      1.000   5190.000    232.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   159.4159   -41.1663     1.3337    -0.5950     0.0000     0.4292    14.7006    14.6999     0.000
     21    -4.2588    29.9999      1.000   5293.000    224.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   159.4159   -41.1663     1.3787     1.1936    -0.0000    -0.0762    14.7006    14.6999     0.000
# Sum of Counts = 4416
# Center of Mass = 20.077083+/-0.437002
# Full Width Half-Maximum = 12.190171+/-0.245744
# 1:43:41 PM  2/13/2007   scan completed.

1:44:01 PM  2/13/2007    Executing "scan s1 rand1 s2 10 60 0.5 a1 10 60 0.5 preset time 1"


# scan = 22
# date = 2/13/2007
# time = 1:44:01 PM
# experiment = Inelastic neutron scattering from something
# experiment_number = 1
# command = scan s1 rand1 s2 10 60 0.5 a1 10 60 0.5 preset time 1
# builtin_command = scan s1 rand1 s2 10 60 0.5 a1 10 60 0.5 preset time 1
# users = M. Lumsden, L. Robertson, M. Yethiraj
# local_contact = All of us
# scan_title = 
# monochromator = PG002
# analyzer = Pg002
# sense = -+-
# collimation = 48-40-40-120
# samplename = Test crystal
# sampletype = crystal
# samplemosaic = 30.000000
# latticeconstants = 5.500000,6.780000,2.350000,90.000000,90.000000,90.000000
# ubmatrix = -0.160897,0.000001,0.198179,-0.084677,0.000001,-0.376567,-0.000002,-0.147493,-0.000001
# mode = 0
# plane_normal = -0.000007,-0.000006,1.000000
# ubconf = 
# preset_type = normal 
# preset_channel = time
# preset_value = 1.000000
# def_x = s2
# def_y = detector
# col_headers = 
#   Pt.         s1         s2         a1       time    monitor   detector focal_length         m1         m2     mfocus        sgl        sgu        stl        stu         a2          q          h          k          l         ei         ef          e
      1    20.7002     9.9970    10.0003      1.000   5211.000    213.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     0.4641     0.2949     0.0000    -0.1194    14.7006    14.6999     0.000
      2    92.4660    10.4990    10.5007      1.000   5250.000    223.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     0.4874    -0.1801     0.0000    -0.1653    14.7006    14.6999     0.000
      3  -190.6844    10.9974    10.9998      1.000   5324.000    187.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     0.5105    -0.4378     0.0000     0.0383    14.7006    14.6999     0.000
      4    50.6762    11.5034    11.5000      1.000   5007.000    186.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     0.5339     0.1392     0.0000    -0.1906    14.7006    14.6999     0.000
      5   167.4847    11.9974    11.9998      1.000   5186.000    210.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     0.5567    -0.4810     0.0000     0.0334    14.7006    14.6999     0.000
      6   -21.2280    12.5013    12.4998      1.000   4980.000    208.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     0.5800     0.5077     0.0000    -0.0010    14.7006    14.6999     0.000
      7   150.4088    12.9984    13.0003      1.000   5362.000    201.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     0.6030    -0.5222     0.0000    -0.0327    14.7006    14.6999     0.000
      8   -20.1043    13.4994    13.5001      1.000   5248.000    217.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     0.6261     0.5480     0.0000    -0.0037    14.7006    14.6999     0.000
      9   149.9546    14.0003    14.0004      1.000   5251.000    249.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     0.6492    -0.5608     0.0000    -0.0392    14.7006    14.6999     0.000
     10  -114.3376    14.4996    14.4997      1.000   5118.000    201.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     0.6722    -0.0394     0.0000     0.2509    14.7006    14.6999     0.000
     11    13.8332    14.9977    15.0007      1.000   5204.000    165.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     0.6952     0.5040     0.0000    -0.1457    14.7006    14.6999     0.000
     12   101.5536    15.5024    15.4997      1.000   5285.000    226.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     0.7185    -0.3291     0.0000    -0.2290    14.7006    14.6999     0.000
     13   -83.4636    15.9989    16.0002      1.000   5116.000    197.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     0.7413     0.2874     0.0000     0.2486    14.7006    14.6999     0.000
     14  -109.0136    16.5037    16.4999      1.000   5156.000    189.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     0.7646     0.0057     0.0000     0.2859    14.7006    14.6999     0.000
     15  -194.2729    16.9980    16.9997      1.000   5118.000    193.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     0.7873    -0.6866     0.0000     0.0256    14.7006    14.6999     0.000
     16  -114.4697    17.5024    17.5004      1.000   5330.000    215.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     0.8105    -0.0676     0.0000     0.3017    14.7006    14.6999     0.000
     17  -136.5952    18.0030    17.9998      1.000   5220.000    215.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     0.8335    -0.3408     0.0000     0.2756    14.7006    14.6999     0.000
     18   -10.6327    18.5037    18.4998      1.000   5251.000    210.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     0.8564     0.7426     0.0000    -0.0439    14.7006    14.6999     0.000
     19   -23.3065    18.9981    18.9994      1.000   5183.000    209.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     0.8791     0.7666     0.0000     0.0290    14.7006    14.6999     0.000
     20  -176.4464    19.4989    19.5006      1.000   4941.000    206.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     0.9021    -0.7344     0.0000     0.1240    14.7006    14.6999     0.000
     21   -69.4282    19.9988    20.0003      1.000   5172.000    219.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     0.9250     0.5021     0.0000     0.2714    14.7006    14.6999     0.000
     22   166.8944    20.5015    20.4995      1.000   5202.000    226.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     0.9480    -0.8274     0.0000     0.0272    14.7006    14.6999     0.000
     23   -75.9273    21.0032    20.9999      1.000   5239.000    211.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     0.9709     0.4419     0.0000     0.3102    14.7006    14.6999     0.000
     24   103.2081    21.4992    21.5002      1.000   5031.000    203.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     0.9936    -0.4377     0.0000    -0.3211    14.7006    14.6999     0.000
     25   -82.0293    21.9998    21.9997      1.000   5193.000    210.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     1.0164     0.3721     0.0000     0.3453    14.7006    14.6999     0.000
     26   -95.0745    22.4951    22.4997      1.000   5275.000    203.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     1.0390     0.1803     0.0000     0.3809    14.7006    14.6999     0.000
     27    93.6456    22.9997    23.0006      1.000   5274.000    203.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     1.0620    -0.3164     0.0000    -0.3735    14.7006    14.6999     0.000
     28    75.0496    23.4966    23.4992      1.000   5206.000    222.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     1.0846    -0.0175     0.0000    -0.4056    14.7006    14.6999     0.000
     29   -52.1974    23.9974    24.0002      1.000   5241.000    197.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     1.1074     0.7798     0.0000     0.2460    14.7006    14.6999     0.000
     30    35.1727    24.4960    24.5005      1.000   5190.000    217.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     1.1301     0.6268    -0.0000    -0.3270    14.7006    14.6999     0.000
     31  -166.1263    25.0015    24.9992      1.000   5288.000    196.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     1.1530    -0.8817     0.0000     0.2099    14.7006    14.6999     0.000
     32    59.5689    25.5015    25.4997      1.000   5166.000    227.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     1.1757     0.2738     0.0000    -0.4239    14.7006    14.6999     0.000
     33  -195.6941    26.0010    26.0001      1.000   5054.000    211.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     1.1984    -1.0488     0.0000    -0.0074    14.7006    14.6999     0.000
     34    38.5038    26.5014    26.5003      1.000   5206.000    203.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     1.2210     0.6431    -0.0000    -0.3648    14.7006    14.6999     0.000
     35   155.0776    26.9988    27.0001      1.000   5324.000    202.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     1.2435    -1.0697     0.0000    -0.0861    14.7006    14.6999     0.000
     36   140.9158    27.5008    27.4992      1.000   5169.000    229.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     1.2662    -1.0039     0.0000    -0.2007    14.7006    14.6999     0.000
     37    59.4696    27.9968    27.9998      1.000   5358.000    213.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     1.2886     0.3255     0.0000    -0.4614    14.7006    14.6999     0.000
     38  -108.6823    28.4982    28.4997      1.000   5142.000    208.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     1.3112    -0.1036     0.0000     0.4884    14.7006    14.6999     0.000
     39   162.4565    28.9995    29.0005      1.000   5211.000    206.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     1.3338    -1.1642     0.0000    -0.0373    14.7006    14.6999     0.000
     40    43.3786    29.4954    29.4996      1.000   5163.000    183.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     1.3561     0.6571    -0.0000    -0.4224    14.7006    14.6999     0.000
     41    77.3606    29.9989    29.9997      1.000   5099.000    215.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     1.3787    -0.0024     0.0000    -0.5156    14.7006    14.6999     0.000
     42  -161.3112    30.4982    30.4995      1.000   5089.000    226.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     1.4011    -1.0491     0.0000     0.2714    14.7006    14.6999     0.000
     43    59.8020    30.9999    30.9992      1.000   5067.000    208.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     1.4236     0.3839    -0.0000    -0.5065    14.7006    14.6999     0.000
     44    -3.7338    31.4972    31.4994      1.000   5063.000    217.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     1.4458     1.2525    -0.0000    -0.0778    14.7006    14.6999     0.000
     45    73.1741    32.0015    31.9996      1.000   5144.000    239.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     1.4684     0.1136     0.0000    -0.5470    14.7006    14.6999     0.000
     46   -43.9251    32.5041    32.4995      1.000   5104.000    208.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     1.4908     1.1016     0.0000     0.2990    14.7006    14.6999     0.000
     47   -58.4924    33.0018    33.0003      1.000   5151.000    184.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     1.5130     0.8992     0.0000     0.4155    14.7006    14.6999     0.000
     48   -23.1211    33.5000    33.5005      1.000   5140.000    217.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     1.5352     1.3139    -0.0000     0.1205    14.7006    14.6999     0.000
     49    -5.9896    33.9984    34.0002      1.000   5068.000    214.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     1.5574     1.3586    -0.0000    -0.0484    14.7006    14.6999     0.000
     50    22.5314    34.5012    34.5005      1.000   5128.000    206.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     1.5797     1.1593    -0.0000    -0.3221    14.7006    14.6999     0.000
     51    22.5541    35.0036    34.9992      1.000   5206.000    203.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     1.6020     1.1787    -0.0000    -0.3246    14.7006    14.6999     0.000
     52   147.4871    35.4998    35.5006      1.000   5072.000    197.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     1.6240    -1.3133     0.0000    -0.2325    14.7006    14.6999     0.000
     53   -82.1983    36.0028    36.0002      1.000   5092.000    231.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     1.6463     0.4347     0.0000     0.5870    14.7006    14.6999     0.000
     54   -78.9362    36.4996    36.5001      1.000   5045.000    211.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     1.6682     0.5130     0.0000     0.5842    14.7006    14.6999     0.000
     55  -197.3899    36.9987    36.9998      1.000   5112.000    212.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     1.6902    -1.4647     0.0000    -0.0894    14.7006    14.6999     0.000
     56  -168.2141    37.5029    37.5001      1.000   5326.000    198.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     1.7124    -1.4014     0.0000     0.2273    14.7006    14.6999     0.000
     57  -200.6048    37.9989    38.0005      1.000   5134.000    200.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     1.7343    -1.4857     0.0000    -0.1332    14.7006    14.6999     0.000
     58  -113.7310    38.5005    38.4997      1.000   5095.000    212.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     1.7563    -0.4038     0.0000     0.6338    14.7006    14.6999     0.000
     59  -186.4686    39.0007    38.9992      1.000   5127.000    209.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     1.7782    -1.5558     0.0000     0.0207    14.7006    14.6999     0.000
     60  -136.4974    39.5025    39.4994      1.000   5092.000    208.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     1.8002    -0.9808     0.0000     0.5270    14.7006    14.6999     0.000
     61    16.6899    40.0002    39.9991      1.000   5107.000    215.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     1.8220     1.4519    -0.0000    -0.2820    14.7006    14.6999     0.000
     62  -138.6258    40.5007    40.4990      1.000   5070.000    204.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     1.8438    -1.0614     0.0000     0.5195    14.7006    14.6999     0.000
     63  -112.1949    40.9968    41.0001      1.000   5195.000    207.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     1.8654    -0.4209     0.0000     0.6741    14.7006    14.6999     0.000
     64   -54.7255    41.5017    41.4998      1.000   5222.000    219.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     1.8874     1.1115     0.0000     0.5223    14.7006    14.6999     0.000
     65  -125.6260    42.0009    42.0000      1.000   5074.000    211.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     1.9091    -0.8069     0.0000     0.6253    14.7006    14.6999     0.000
     66  -106.6296    42.4961    42.5004      1.000   5073.000    214.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     1.9305    -0.2970     0.0000     0.7108    14.7006    14.6999     0.000
     67   -43.0589    42.9972    42.9997      1.000   5293.000    198.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     1.9522     1.3683     0.0000     0.4374    14.7006    14.6999     0.000
     68  -195.4667    43.4994    43.5000      1.000   5280.000    210.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     1.9739    -1.7044     0.0000    -0.1214    14.7006    14.6999     0.000
     69  -134.5598    44.0004    44.0002      1.000   5159.000    225.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     1.9956    -1.0947     0.0000     0.5816    14.7006    14.6999     0.000
     70  -103.3407    44.5011    44.4997      1.000   5227.000    210.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     2.0171    -0.2407     0.0000     0.7474    14.7006    14.6999     0.000
     71   -57.3891    45.0000    45.0008      1.000   5297.000    200.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     2.0386     1.0953     0.0000     0.6019    14.7006    14.6999     0.000
     72   -30.6103    45.5020    45.4998      1.000   5102.000    194.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     2.0601     1.6262    -0.0000     0.3330    14.7006    14.6999     0.000
     73   159.8467    45.9993    46.0002      1.000   5132.000    208.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     2.0814    -1.7566     0.0000    -0.2067    14.7006    14.6999     0.000
     74   -81.7773    46.5009    46.5004      1.000   5082.000    221.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     2.1028     0.4055     0.0000     0.7672    14.7006    14.6999     0.000
     75   -22.7250    46.9997    47.0007      1.000   5047.000    163.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     2.1241     1.7636    -0.0000     0.2517    14.7006    14.6999     0.000
     76   100.7461    47.4975    47.4996      1.000   4998.000    205.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     2.1453    -0.4782     0.0000    -0.7759    14.7006    14.6999     0.000
     77   108.4352    48.0032    48.0007      1.000   5214.000    207.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     2.1668    -0.7163     0.0000    -0.7504    14.7006    14.6999     0.000
     78   -84.6305    48.4984    48.4997      1.000   5216.000    228.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     2.1878     0.2955     0.0000     0.8085    14.7006    14.6999     0.000
     79    53.6130    49.0019    48.9994      1.000   5319.000    206.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     2.2092     1.0570    -0.0000    -0.6919    14.7006    14.6999     0.000
     80    59.6583    49.4999    49.4997      1.000   5237.000    199.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     2.2302     0.8965    -0.0000    -0.7410    14.7006    14.6999     0.000
     81   -90.6800    50.0012    50.0000      1.000   5191.000    196.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     2.2513     0.0714     0.0000     0.8415    14.7006    14.6999     0.000
     82  -184.7820    50.4980    50.5002      1.000   5236.000    194.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     2.2723    -1.9875     0.0000    -0.0337    14.7006    14.6999     0.000
     83    71.3217    51.0025    51.0002      1.000   5176.000    198.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     2.2934     0.5676    -0.0000    -0.8228    14.7006    14.6999     0.000
     84    21.6842    51.4975    51.4993      1.000   5045.000    202.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     2.3142     1.8550    -0.0000    -0.3478    14.7006    14.6999     0.000
     85   170.7514    52.0042    51.9996      1.000   5080.000    208.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     2.3354    -2.0268     0.0000    -0.1139    14.7006    14.6999     0.000
     86     8.7573    52.5029    52.4993      1.000   5174.000    203.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     2.3562     2.0295    -0.0000    -0.1570    14.7006    14.6999     0.000
     87   -83.8052    52.9999    53.0002      1.000   5444.000    209.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     2.3769     0.2698     0.0000     0.8815    14.7006    14.6999     0.000
     88  -199.6196    53.5043    53.5007      1.000   5046.000    210.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     2.3979    -1.9892     0.0000    -0.2863    14.7006    14.6999     0.000
     89   110.2524    53.9970    54.0002      1.000   4989.000    209.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     2.4183    -0.7589     0.0000    -0.8443    14.7006    14.6999     0.000
     90   -14.6933    54.5039    54.4999      1.000   5220.000    186.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     2.4393     2.0701    -0.0000     0.2236    14.7006    14.6999     0.000
     91    58.1970    55.0014    55.0002      1.000   5181.000    219.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     2.4598     1.1266    -0.0000    -0.7840    14.7006    14.6999     0.000
     92   -54.0928    55.4994    55.4995      1.000   5200.000    191.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     2.4803     1.2735     0.0000     0.7513    14.7006    14.6999     0.000
     93  -210.8489    55.9991    56.0009      1.000   5219.000    213.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     2.5008    -1.8746     0.0000    -0.4830    14.7006    14.6999     0.000
     94    78.8161    56.5050    56.4993      1.000   5157.000    182.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     2.5216     0.4469    -0.0000    -0.9236    14.7006    14.6999     0.000
     95  -162.4111    56.9982    57.0009      1.000   5221.000    183.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     2.5418    -2.1295     0.0000     0.2755    14.7006    14.6999     0.000
     96  -185.5516    57.5031    57.4993      1.000   5229.000    227.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     2.5624    -2.2283     0.0000    -0.1093    14.7006    14.6999     0.000
     97   157.7373    57.9986    58.0001      1.000   5039.000    189.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     2.5825    -2.0730     0.0000    -0.3853    14.7006    14.6999     0.000
     98   136.6532    58.5008    58.5006      1.000   5276.000    208.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     2.6029    -1.6156     0.0000    -0.6865    14.7006    14.6999     0.000
     99   -70.2092    59.0035    58.9998      1.000   5127.000    230.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     2.6233     0.7113     0.0000     0.9329    14.7006    14.6999     0.000
    100   -40.9071    59.4987    59.5003      1.000   5176.000    198.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     2.6433     1.6950     0.0000     0.6730    14.7006    14.6999     0.000
    101    28.3406    60.0014    60.0004      1.000   5205.000    204.000    66.9040   159.4125   -41.1654   -43.0105    -0.0001    -0.0004     0.0000     0.0001   -41.1663     2.6636     2.0939    -0.0000    -0.4382    14.7006    14.6999     0.000
# Sum of Counts = 20927
# Center of Mass = 34.892821+/-0.355572
# Full Width Half-Maximum = 29.038329+/-0.182556
# 1:53:30 PM  2/13/2007   scan completed.

3:59:29 PM  5/9/2007    Executing "calc h 1 k 0 l 1 e 0"

Calculating motor positions based on:
h=1.00000     k=0.00000     l=1.00000     e=0.00000     

Resulting calculated motor positions:
m2=-41.16623     a2=-41.16623     a1=159.41688     s2=66.16037     s1=-61.54102     sgl=0.00041     sgu=-0.00035     mfocus=0.00000     

NOTE: Any values not explicitly specified will be read from the current motor positions.


4:00:31 PM  5/9/2007    Executing "ubcalc file "C:\spice\spice_code_lv_82\Support_Files\User\User_TAS\exp1\UBConf\tmp\UB09May2007_40029PM.ini""

Setting the UB matrix using the configuration file "C:\spice\spice_code_lv_82\Support_Files\User\User_TAS\exp1\UBConf\tmp\UB09May2007_40029PM.ini".

The UB matrix was successfully generated using:

Scattering plane specified by:
 h1=1.000  k1=0.000  l1=0.000     h2=0.000  k2=0.000  l2=1.000
the single peak position:
h=2.0000  k=0.0000  l=0.0000     s2=36.7881     s1=-9.3614     sgl=0.0004     sgu=-0.0003  Ei=14.6994  Ef=14.6989

and the following lattice parameters:
a=6.7800  b=6.7800  c=2.3500     alpha=90.0000  beta=90.0000  gamma=90.0000

Results of the new UB matrix:

Peak position as input:
           h            k            l           s2           s1          sgl          sgu           Ei           Ef
      2.0000       0.0000       0.0000      36.7881      -9.3614       0.0004      -0.0003      14.6994      14.6989

Calculated angle positions using original h,k,l,Ei,Ef:
           h            k            l           Ei           Ef           s2           s1          sgl          sgu           m2           a2
      2.0000       0.0000       0.0000      14.6994      14.6989      40.7235      -7.3938       0.0004      -0.0003       0.0000     -41.1671     -41.1679

Calculated h,k,l positions using original angles:
           h            k            l           s2           s1          sgl          sgu           Ei           Ef
      1.8138       0.0000       0.0000      36.7881      -9.3614       0.0004      -0.0003      14.6994      14.6989


The orientation information has been stored in the file 'C:\spice\spice_code_lv_82\Support_Files\User\User_TAS\exp1\UBConf\UB09May2007_40031PM.ini'.
To restore the configuration to this state at a later time, type:

ubcalc file=C:\spice\spice_code_lv_82\Support_Files\User\User_TAS\exp1\UBConf\UB09May2007_40031PM.ini


4:01:01 PM  5/9/2007    Executing "drive h 2.000000 k 0.000000 l 0.000000 e 0.000000"
                        Derived from "br 2 0 0"

Driving to the following position: ""

Destination Motor Positions:
motor           position
m2              -41.16623
a2              -41.16623
a1              159.41688
s2              40.72225
s1              -7.39577
sgl             0.00041
sgu             -0.00035
mfocus          0.00000

Drive completed.


4:01:48 PM  5/9/2007    Executing "drive h 2 k 0 l 0 e 5"

Driving to the following position: ""

Destination Motor Positions:
motor           position
m2              -35.35888
a2              -41.16623
a1              159.41688
s2              36.71826
s1              3.01827
sgl             0.00041
sgu             -0.00035
mfocus          0.00000

Drive completed.


3:24:37 PM  5/10/2007    Executing "scan n 0 preset time 10"


# scan = 23
# date = 5/10/2007
# time = 3:24:37 PM
# experiment = Inelastic neutron scattering from something
# experiment_number = 1
# command = scan n 0 preset time 10
# builtin_command = scan n 0 preset time 10
# users = M. Lumsden, L. Robertson, M. Yethiraj
# local_contact = All of us
# scan_title = 
# monochromator = PG002
# analyzer = Pg002
# sense = -+-
# collimation = 48-40-40-120
# samplename = Test crystal
# sampletype = crystal
# samplemosaic = 30.000000
# latticeconstants = 6.780000,6.780000,2.350000,90.000000,90.000000,90.000000
# ubmatrix = -0.130521,0.000001,0.198179,-0.068690,0.000001,-0.376567,-0.000001,-0.147493,-0.000001
# mode = 0
# plane_normal = -0.000007,-0.000006,1.000000
# ubconf = 
# preset_type = normal 
# preset_channel = time
# preset_value = 10.000000
# def_x = Pt.
# def_y = detector
# col_headers = 
#   Pt.       time    monitor   detector focal_length         m1         m2     mfocus         s1         s2        sgl        sgu        stl        stu         a1         a2          q          h          k          l         ei         ef          e
# Thu, May 10, 2007 [3:24:37 PM] : SPICE Error in Common.lvlib:Common_Commands.lvlib:drive_scan.vi.
# ERROR in driving: Thu, May 10, 2007 [3:24:37 PM] : SPICE Error in Common.lvlib:Common_Commands.lvlib:Drive_Motor_Val_Pairs.vi. 
# The argument for motor  
# , "" contains more than one motor position.
# ...Move aborted.
# Sum of Counts = 0
# Center of Mass = 0.000000+/-0.000000
# Full Width Half-Maximum = 0.000000+/-0.000000
# 3:24:37 PM  5/10/2007   scan completed.

3:25:09 PM  5/10/2007    Executing "scan n 0 preset time 10"


# scan = 24
# date = 5/10/2007
# time = 3:25:09 PM
# experiment = Inelastic neutron scattering from something
# experiment_number = 1
# command = scan n 0 preset time 10
# builtin_command = scan n 0 preset time 10
# users = M. Lumsden, L. Robertson, M. Yethiraj
# local_contact = All of us
# scan_title = 
# monochromator = PG002
# analyzer = Pg002
# sense = -+-
# collimation = 48-40-40-120
# samplename = Test crystal
# sampletype = crystal
# samplemosaic = 30.000000
# latticeconstants = 6.780000,6.780000,2.350000,90.000000,90.000000,90.000000
# ubmatrix = -0.130521,0.000001,0.198179,-0.068690,0.000001,-0.376567,-0.000001,-0.147493,-0.000001
# mode = 0
# plane_normal = -0.000007,-0.000006,1.000000
# ubconf = 
# preset_type = normal 
# preset_channel = time
# preset_value = 10.000000
# def_x = Pt.
# def_y = detector
# col_headers = 
#   Pt.       time    monitor   detector focal_length         m1         m2     mfocus         s1         s2        sgl        sgu        stl        stu         a1         a2          q          h          k          l         ei         ef          e
# Thu, May 10, 2007 [3:25:09 PM] : SPICE Error in Common.lvlib:Common_Commands.lvlib:drive_scan.vi.
# ERROR in driving: Thu, May 10, 2007 [3:25:09 PM] : SPICE Error in Common.lvlib:Common_Commands.lvlib:Drive_Motor_Val_Pairs.vi. 
# The argument for motor  
# , "" contains more than one motor position.
# ...Move aborted.
# Sum of Counts = 0
# Center of Mass = 0.000000+/-0.000000
# Full Width Half-Maximum = 0.000000+/-0.000000
# 3:25:09 PM  5/10/2007   scan completed.

3:25:53 PM  5/10/2007    Executing "scan n 0 preset time 10"


# scan = 25
# date = 5/10/2007
# time = 3:25:53 PM
# experiment = Inelastic neutron scattering from something
# experiment_number = 1
# command = scan n 0 preset time 10
# builtin_command = scan n 0 preset time 10
# users = M. Lumsden, L. Robertson, M. Yethiraj
# local_contact = All of us
# scan_title = 
# monochromator = PG002
# analyzer = Pg002
# sense = -+-
# collimation = 48-40-40-120
# samplename = Test crystal
# sampletype = crystal
# samplemosaic = 30.000000
# latticeconstants = 6.780000,6.780000,2.350000,90.000000,90.000000,90.000000
# ubmatrix = -0.130521,0.000001,0.198179,-0.068690,0.000001,-0.376567,-0.000001,-0.147493,-0.000001
# mode = 0
# plane_normal = -0.000007,-0.000006,1.000000
# ubconf = 
# preset_type = normal 
# preset_channel = time
# preset_value = 10.000000
# def_x = Pt.
# def_y = detector
# col_headers = 
#   Pt.       time    monitor   detector focal_length         m1         m2     mfocus         s1         s2        sgl        sgu        stl        stu         a1         a2          q          h          k          l         ei         ef          e
# Thu, May 10, 2007 [3:25:53 PM] : SPICE Error in Common.lvlib:Common_Commands.lvlib:drive_scan.vi.
# ERROR in driving: Thu, May 10, 2007 [3:25:53 PM] : SPICE Error in Common.lvlib:Common_Commands.lvlib:Drive_Motor_Val_Pairs.vi. 
# The argument for motor  
# , "" contains more than one motor position.
# ...Move aborted.
# Sum of Counts = 0
# Center of Mass = 0.000000+/-0.000000
# Full Width Half-Maximum = 0.000000+/-0.000000
# 3:25:53 PM  5/10/2007   scan completed.

3:26:05 PM  5/10/2007    Executing "scan n 0 preset time 10"


# scan = 26
# date = 5/10/2007
# time = 3:26:05 PM
# experiment = Inelastic neutron scattering from something
# experiment_number = 1
# command = scan n 0 preset time 10
# builtin_command = scan n 0 preset time 10
# users = M. Lumsden, L. Robertson, M. Yethiraj
# local_contact = All of us
# scan_title = 
# monochromator = PG002
# analyzer = Pg002
# sense = -+-
# collimation = 48-40-40-120
# samplename = Test crystal
# sampletype = crystal
# samplemosaic = 30.000000
# latticeconstants = 6.780000,6.780000,2.350000,90.000000,90.000000,90.000000
# ubmatrix = -0.130521,0.000001,0.198179,-0.068690,0.000001,-0.376567,-0.000001,-0.147493,-0.000001
# mode = 0
# plane_normal = -0.000007,-0.000006,1.000000
# ubconf = 
# preset_type = normal 
# preset_channel = time
# preset_value = 10.000000
# def_x = Pt.
# def_y = detector
# col_headers = 
#   Pt.       time    monitor   detector focal_length         m1         m2     mfocus         s1         s2        sgl        sgu        stl        stu         a1         a2          q          h          k          l         ei         ef          e
# Thu, May 10, 2007 [3:26:05 PM] : SPICE Error in Common.lvlib:Common_Commands.lvlib:drive_scan.vi.
# ERROR in driving: Thu, May 10, 2007 [3:26:05 PM] : SPICE Error in Common.lvlib:Common_Commands.lvlib:Drive_Motor_Val_Pairs.vi. 
# The argument for motor  
# , "" contains more than one motor position.
# ...Move aborted.
# Sum of Counts = 0
# Center of Mass = 0.000000+/-0.000000
# Full Width Half-Maximum = 0.000000+/-0.000000
# 3:26:05 PM  5/10/2007   scan completed.

3:26:40 PM  5/10/2007    Executing "scan n 0 preset time 10"


# scan = 27
# date = 5/10/2007
# time = 3:26:40 PM
# experiment = Inelastic neutron scattering from something
# experiment_number = 1
# command = scan n 0 preset time 10
# builtin_command = scan n 0 preset time 10
# users = M. Lumsden, L. Robertson, M. Yethiraj
# local_contact = All of us
# scan_title = 
# monochromator = PG002
# analyzer = Pg002
# sense = -+-
# collimation = 48-40-40-120
# samplename = Test crystal
# sampletype = crystal
# samplemosaic = 30.000000
# latticeconstants = 6.780000,6.780000,2.350000,90.000000,90.000000,90.000000
# ubmatrix = -0.130521,0.000001,0.198179,-0.068690,0.000001,-0.376567,-0.000001,-0.147493,-0.000001
# mode = 0
# plane_normal = -0.000007,-0.000006,1.000000
# ubconf = 
# preset_type = normal 
# preset_channel = time
# preset_value = 10.000000
# def_x = Pt.
# def_y = detector
# col_headers = 
#   Pt.       time    monitor   detector focal_length         m1         m2     mfocus         s1         s2        sgl        sgu        stl        stu         a1         a2          q          h          k          l         ei         ef          e
# Thu, May 10, 2007 [3:26:40 PM] : SPICE Error in Common.lvlib:Common_Commands.lvlib:drive_scan.vi.
# ERROR in driving: Thu, May 10, 2007 [3:26:40 PM] : SPICE Error in Common.lvlib:Common_Commands.lvlib:Drive_Motor_Val_Pairs.vi. 
# The argument for motor  
# , "" contains more than one motor position.
# ...Move aborted.
# Sum of Counts = 0
# Center of Mass = 0.000000+/-0.000000
# Full Width Half-Maximum = 0.000000+/-0.000000
# 3:26:40 PM  5/10/2007   scan completed.

3:27:11 PM  5/10/2007    Executing "scan n 0 preset time 10"


# scan = 28
# date = 5/10/2007
# time = 3:27:11 PM
# experiment = Inelastic neutron scattering from something
# experiment_number = 1
# command = scan n 0 preset time 10
# builtin_command = scan n 0 preset time 10
# users = M. Lumsden, L. Robertson, M. Yethiraj
# local_contact = All of us
# scan_title = 
# monochromator = PG002
# analyzer = Pg002
# sense = -+-
# collimation = 48-40-40-120
# samplename = Test crystal
# sampletype = crystal
# samplemosaic = 30.000000
# latticeconstants = 6.780000,6.780000,2.350000,90.000000,90.000000,90.000000
# ubmatrix = -0.130521,0.000001,0.198179,-0.068690,0.000001,-0.376567,-0.000001,-0.147493,-0.000001
# mode = 0
# plane_normal = -0.000007,-0.000006,1.000000
# ubconf = 
# preset_type = normal 
# preset_channel = time
# preset_value = 10.000000
# def_x = Pt.
# def_y = detector
# col_headers = 
#   Pt.       time    monitor   detector focal_length         m1         m2     mfocus         s1         s2        sgl        sgu        stl        stu         a1         a2          q          h          k          l         ei         ef          e
# Thu, May 10, 2007 [3:27:11 PM] : SPICE Error in Common.lvlib:Common_Commands.lvlib:drive_scan.vi.
# ERROR in driving: Thu, May 10, 2007 [3:27:11 PM] : SPICE Error in Common.lvlib:Common_Commands.lvlib:Drive_Motor_Val_Pairs.vi. 
# The argument for motor  
# , "" contains more than one motor position.
# ...Move aborted.
# Sum of Counts = 0
# Center of Mass = 0.000000+/-0.000000
# Full Width Half-Maximum = 0.000000+/-0.000000
# 3:27:11 PM  5/10/2007   scan completed.

3:27:31 PM  5/10/2007    Executing "scan n 0 e 0 preset time 10"


# scan = 29
# date = 5/10/2007
# time = 3:27:31 PM
# experiment = Inelastic neutron scattering from something
# experiment_number = 1
# command = scan n 0 e 0 preset time 10
# builtin_command = scan n 0 e 0 preset time 10
# users = M. Lumsden, L. Robertson, M. Yethiraj
# local_contact = All of us
# scan_title = 
# monochromator = PG002
# analyzer = Pg002
# sense = -+-
# collimation = 48-40-40-120
# samplename = Test crystal
# sampletype = crystal
# samplemosaic = 30.000000
# latticeconstants = 6.780000,6.780000,2.350000,90.000000,90.000000,90.000000
# ubmatrix = -0.130521,0.000001,0.198179,-0.068690,0.000001,-0.376567,-0.000001,-0.147493,-0.000001
# mode = 0
# plane_normal = -0.000007,-0.000006,1.000000
# ubconf = 
# preset_type = normal 
# preset_channel = time
# preset_value = 10.000000
# def_x = Pt.
# def_y = detector
# col_headers = 
#   Pt.          e       time    monitor   detector focal_length         m1         m2     mfocus         s1         s2        sgl        sgu        stl        stu         a1         a2          q          h          k          l         ei         ef
      1     0.0017     10.000  50151.000   2038.000     0.0000   159.4125    41.1656     0.0547     3.0192    36.7185     0.0004    -0.0002     0.0000     0.0001   159.4178   -41.1681     1.6778     1.7682     0.0000    -0.1349    14.7004    14.698
# Sum of Counts = 2038
# Center of Mass = 1.000000+/-0.031327
# Full Width Half-Maximum = 0.000000+/-NaN
# 3:27:51 PM  5/10/2007   scan completed.

3:28:54 PM  5/10/2007    Executing "scan n 0 preset time 10"


# scan = 30
# date = 5/10/2007
# time = 3:28:54 PM
# experiment = Inelastic neutron scattering from something
# experiment_number = 1
# command = scan n 0 preset time 10
# builtin_command = scan n 0 preset time 10
# users = M. Lumsden, L. Robertson, M. Yethiraj
# local_contact = All of us
# scan_title = 
# monochromator = PG002
# analyzer = Pg002
# sense = -+-
# collimation = 48-40-40-120
# samplename = Test crystal
# sampletype = crystal
# samplemosaic = 30.000000
# latticeconstants = 6.780000,6.780000,2.350000,90.000000,90.000000,90.000000
# ubmatrix = -0.130521,0.000001,0.198179,-0.068690,0.000001,-0.376567,-0.000001,-0.147493,-0.000001
# mode = 0
# plane_normal = -0.000007,-0.000006,1.000000
# ubconf = 
# preset_type = normal 
# preset_channel = time
# preset_value = 10.000000
# def_x = Pt.
# def_y = detector
# col_headers = 
#   Pt.       time    monitor   detector focal_length         m1         m2     mfocus         s1         s2        sgl        sgu        stl        stu         a1         a2          q          h          k          l         ei         ef          e
# Thu, May 10, 2007 [3:28:54 PM] : SPICE Error in Common.lvlib:Common_Commands.lvlib:drive_scan.vi.
# ERROR in driving: Thu, May 10, 2007 [3:28:54 PM] : SPICE Error in Common.lvlib:Common_Commands.lvlib:Drive_Motor_Val_Pairs.vi. 
# The argument for motor  
# , "" contains more than one motor position.
# ...Move aborted.
# Sum of Counts = 0
# Center of Mass = 0.000000+/-0.000000
# Full Width Half-Maximum = 0.000000+/-0.000000
# 3:28:54 PM  5/10/2007   scan completed.

3:29:11 PM  5/10/2007    Executing "scan n 0 e 0 preset time 10"


# scan = 31
# date = 5/10/2007
# time = 3:29:11 PM
# experiment = Inelastic neutron scattering from something
# experiment_number = 1
# command = scan n 0 e 0 preset time 10
# builtin_command = scan n 0 e 0 preset time 10
# users = M. Lumsden, L. Robertson, M. Yethiraj
# local_contact = All of us
# scan_title = 
# monochromator = PG002
# analyzer = Pg002
# sense = -+-
# collimation = 48-40-40-120
# samplename = Test crystal
# sampletype = crystal
# samplemosaic = 30.000000
# latticeconstants = 6.780000,6.780000,2.350000,90.000000,90.000000,90.000000
# ubmatrix = -0.130521,0.000001,0.198179,-0.068690,0.000001,-0.376567,-0.000001,-0.147493,-0.000001
# mode = 0
# plane_normal = -0.000007,-0.000006,1.000000
# ubconf = 
# preset_type = normal 
# preset_channel = time
# preset_value = 10.000000
# def_x = Pt.
# def_y = detector
# col_headers = 
#   Pt.          e       time    monitor   detector focal_length         m1         m2     mfocus         s1         s2        sgl        sgu        stl        stu         a1         a2          q          h          k          l         ei         ef
      1    -0.0022     10.000  50389.000   2003.000     0.0000   159.4125    41.1674    -0.0500     3.0192    36.7185     0.0004    -0.0002     0.0000     0.0001   159.4171   -41.1642     1.6779     1.7682     0.0000    -0.1350    14.6992    14.701
# Sum of Counts = 2003
# Center of Mass = 1.000000+/-0.031599
# Full Width Half-Maximum = 0.000000+/-NaN
# 3:29:22 PM  5/10/2007   scan completed.

3:29:22 PM  5/10/2007    Executing "scan n 0 preset time 10"


# scan = 32
# date = 5/10/2007
# time = 3:29:22 PM
# experiment = Inelastic neutron scattering from something
# experiment_number = 1
# command = scan n 0 preset time 10
# builtin_command = scan n 0 preset time 10
# users = M. Lumsden, L. Robertson, M. Yethiraj
# local_contact = All of us
# scan_title = 
# monochromator = PG002
# analyzer = Pg002
# sense = -+-
# collimation = 48-40-40-120
# samplename = Test crystal
# sampletype = crystal
# samplemosaic = 30.000000
# latticeconstants = 6.780000,6.780000,2.350000,90.000000,90.000000,90.000000
# ubmatrix = -0.130521,0.000001,0.198179,-0.068690,0.000001,-0.376567,-0.000001,-0.147493,-0.000001
# mode = 0
# plane_normal = -0.000007,-0.000006,1.000000
# ubconf = 
# preset_type = normal 
# preset_channel = time
# preset_value = 10.000000
# def_x = Pt.
# def_y = detector
# col_headers = 
#   Pt.       time    monitor   detector focal_length         m1         m2     mfocus         s1         s2        sgl        sgu        stl        stu         a1         a2          q          h          k          l         ei         ef          e
# Thu, May 10, 2007 [3:29:22 PM] : SPICE Error in Common.lvlib:Common_Commands.lvlib:drive_scan.vi.
# ERROR in driving: Thu, May 10, 2007 [3:29:22 PM] : SPICE Error in Common.lvlib:Common_Commands.lvlib:Drive_Motor_Val_Pairs.vi. 
# The argument for motor  
# , "" contains more than one motor position.
# ...Move aborted.
# Sum of Counts = 0
# Center of Mass = 0.000000+/-0.000000
# Full Width Half-Maximum = 0.000000+/-0.000000
# 3:29:22 PM  5/10/2007   scan completed.

3:31:16 PM  5/10/2007    Executing "scan n 0 preset time 10"


# scan = 33
# date = 5/10/2007
# time = 3:31:16 PM
# experiment = Inelastic neutron scattering from something
# experiment_number = 1
# command = scan n 0 preset time 10
# builtin_command = scan n 0 preset time 10
# users = M. Lumsden, L. Robertson, M. Yethiraj
# local_contact = All of us
# scan_title = 
# monochromator = PG002
# analyzer = Pg002
# sense = -+-
# collimation = 48-40-40-120
# samplename = Test crystal
# sampletype = crystal
# samplemosaic = 30.000000
# latticeconstants = 6.780000,6.780000,2.350000,90.000000,90.000000,90.000000
# ubmatrix = -0.130521,0.000001,0.198179,-0.068690,0.000001,-0.376567,-0.000001,-0.147493,-0.000001
# mode = 0
# plane_normal = -0.000007,-0.000006,1.000000
# ubconf = 
# preset_type = normal 
# preset_channel = time
# preset_value = 10.000000
# def_x = Pt.
# def_y = detector
# col_headers = 
#   Pt.       time    monitor   detector focal_length         m1         m2     mfocus         s1         s2        sgl        sgu        stl        stu         a1         a2          q          h          k          l         ei         ef          e
      1     10.000  50170.000   2041.000     0.0000   159.4125    41.1674    -0.0500     3.0192    36.7185     0.0004    -0.0002     0.0000     0.0001   159.4171   -41.1642     1.6779     1.7682     0.0000    -0.1350    14.6992    14.7014    -0.002
# Sum of Counts = 2041
# Center of Mass = 1.000000+/-0.031304
# Full Width Half-Maximum = 0.000000+/-NaN
# 3:31:26 PM  5/10/2007   scan completed.

3:31:30 PM  5/10/2007    Executing "scan n 0 e 0 preset time 10"


# scan = 34
# date = 5/10/2007
# time = 3:31:30 PM
# experiment = Inelastic neutron scattering from something
# experiment_number = 1
# command = scan n 0 e 0 preset time 10
# builtin_command = scan n 0 e 0 preset time 10
# users = M. Lumsden, L. Robertson, M. Yethiraj
# local_contact = All of us
# scan_title = 
# monochromator = PG002
# analyzer = Pg002
# sense = -+-
# collimation = 48-40-40-120
# samplename = Test crystal
# sampletype = crystal
# samplemosaic = 30.000000
# latticeconstants = 6.780000,6.780000,2.350000,90.000000,90.000000,90.000000
# ubmatrix = -0.130521,0.000001,0.198179,-0.068690,0.000001,-0.376567,-0.000001,-0.147493,-0.000001
# mode = 0
# plane_normal = -0.000007,-0.000006,1.000000
# ubconf = 
# preset_type = normal 
# preset_channel = time
# preset_value = 10.000000
# def_x = Pt.
# def_y = detector
# col_headers = 
#   Pt.          e       time    monitor   detector focal_length         m1         m2     mfocus         s1         s2        sgl        sgu        stl        stu         a1         a2          q          h          k          l         ei         ef
      1     0.0016     10.000  50133.000   2001.000     0.0000   159.4125    41.1660     0.0469     3.0192    36.7185     0.0004    -0.0002     0.0000     0.0001   159.4164   -41.1683     1.6778     1.7682     0.0000    -0.1349    14.7001    14.698
# Sum of Counts = 2001
# Center of Mass = 1.000000+/-0.031615
# Full Width Half-Maximum = 0.000000+/-NaN
# 3:31:40 PM  5/10/2007   scan completed.

4:12:35 PM  5/10/2007    Executing "scan n 0 preset time 10"


# scan = 35
# date = 5/10/2007
# time = 4:12:35 PM
# experiment = Inelastic neutron scattering from something
# experiment_number = 1
# command = scan n 0 preset time 10
# builtin_command = scan n 0 preset time 10
# users = M. Lumsden, L. Robertson, M. Yethiraj
# local_contact = All of us
# scan_title = 
# monochromator = PG002
# analyzer = Pg002
# sense = -+-
# collimation = 48-40-40-120
# samplename = Test crystal
# sampletype = crystal
# samplemosaic = 30.000000
# latticeconstants = 6.780000,6.780000,2.350000,90.000000,90.000000,90.000000
# ubmatrix = -0.130521,0.000001,0.198179,-0.068690,0.000001,-0.376567,-0.000001,-0.147493,-0.000001
# mode = 0
# plane_normal = -0.000007,-0.000006,1.000000
# ubconf = 
# preset_type = normal 
# preset_channel = time
# preset_value = 10.000000
# def_x = Pt.
# def_y = detector
# col_headers = 
#   Pt.       time    monitor   detector focal_length         m1         m2     mfocus         s1         s2        sgl        sgu        stl        stu         a1         a2          q          h          k          l         ei         ef          e
      1     10.000  49368.000   1967.000     0.0000   159.4125    41.1660     0.0469     3.0192    36.7185     0.0004    -0.0002     0.0000     0.0001   159.4164   -41.1683     1.6778     1.7682     0.0000    -0.1349    14.7001    14.6986     0.001
# Sum of Counts = 1967
# Center of Mass = 1.000000+/-0.031887
# Full Width Half-Maximum = 0.000000+/-NaN
# 4:12:45 PM  5/10/2007   scan completed.

5:41:12 PM  5/10/2007    Executing "scan n 0 preset time 10"


# scan = 36
# date = 5/10/2007
# time = 5:41:12 PM
# experiment = Inelastic neutron scattering from something
# experiment_number = 1
# command = scan n 0 preset time 10
# builtin_command = scan n 0 preset time 10
# users = M. Lumsden, L. Robertson, M. Yethiraj
# local_contact = All of us
# scan_title = 
# monochromator = PG002
# analyzer = Pg002
# sense = -+-
# collimation = 48-40-40-120
# samplename = Test crystal
# sampletype = crystal
# samplemosaic = 30.000000
# latticeconstants = 6.780000,6.780000,2.350000,90.000000,90.000000,90.000000
# ubmatrix = -0.130521,0.000001,0.198179,-0.068690,0.000001,-0.376567,-0.000001,-0.147493,-0.000001
# mode = 0
# plane_normal = -0.000007,-0.000006,1.000000
# ubconf = 
# preset_type = normal 
# preset_channel = time
# preset_value = 10.000000
# def_x = Pt.
# def_y = detector
# col_headers = 
#   Pt.       time    monitor   detector focal_length         m1         m2     mfocus         s1         s2        sgl        sgu        stl        stu         a1         a2          q          h          k          l         ei         ef          e
      1     10.000  49656.000   1981.000     0.0000   159.4125    41.1660     0.0469     3.0192    36.7185     0.0004    -0.0002     0.0000     0.0001   159.4164   -41.1683     1.6778     1.7682     0.0000    -0.1349    14.7001    14.6986     0.001
# Sum of Counts = 1981
# Center of Mass = 1.000000+/-0.031774
# Full Width Half-Maximum = 0.000000+/-NaN
# 5:41:22 PM  5/10/2007   scan completed.

5:41:35 PM  5/10/2007    Executing "scan n 0 preset time 10"


# scan = 37
# date = 5/10/2007
# time = 5:41:35 PM
# experiment = Inelastic neutron scattering from something
# experiment_number = 1
# command = scan n 0 preset time 10
# builtin_command = scan n 0 preset time 10
# users = M. Lumsden, L. Robertson, M. Yethiraj
# local_contact = All of us
# scan_title = 
# monochromator = PG002
# analyzer = Pg002
# sense = -+-
# collimation = 48-40-40-120
# samplename = Test crystal
# sampletype = crystal
# samplemosaic = 30.000000
# latticeconstants = 6.780000,6.780000,2.350000,90.000000,90.000000,90.000000
# ubmatrix = -0.130521,0.000001,0.198179,-0.068690,0.000001,-0.376567,-0.000001,-0.147493,-0.000001
# mode = 0
# plane_normal = -0.000007,-0.000006,1.000000
# ubconf = 
# preset_type = normal 
# preset_channel = time
# preset_value = 10.000000
# def_x = Pt.
# def_y = detector
# col_headers = 
#   Pt.       time    monitor   detector focal_length         m1         m2     mfocus         s1         s2        sgl        sgu        stl        stu         a1         a2          q          h          k          l         ei         ef          e
      1     10.000  50009.000   1984.000     0.0000   159.4125    41.1660     0.0469     3.0192    36.7185     0.0004    -0.0002     0.0000     0.0001   159.4164   -41.1683     1.6778     1.7682     0.0000    -0.1349    14.7001    14.6986     0.001
# Sum of Counts = 1984
# Center of Mass = 1.000000+/-0.031750
# Full Width Half-Maximum = 0.000000+/-NaN
# 5:41:45 PM  5/10/2007   scan completed.

9:59:46 AM  5/11/2007    Executing "drive s1 35"

Driving to the following position: ""

Destination Motor Positions:
motor           position
s1              35.00000

Drive completed.


10:00:04 AM  5/11/2007    Executing "drive s1 45"

Driving to the following position: ""

Destination Motor Positions:
motor           position
s1              45.00000

Drive completed.


10:00:27 AM  5/11/2007    Executing "drive 55"

SPICE Error in drive command: Fri, May 11, 2007 [10:00:27 AM] : SPICE Error in Common.lvlib:Common_Commands.lvlib:Drive_Motor_Val_Pairs.vi.

The argument for motor 55, "" contains more than one motor position.

..Move aborted.


10:00:32 AM  5/11/2007    Executing "drive s1 55"

Driving to the following position: ""

Destination Motor Positions:
motor           position
s1              55.00000

Drive completed.


10:00:54 AM  5/11/2007    Executing "drive s1 75"

Driving to the following position: ""

Destination Motor Positions:
motor           position
s1              75.00000

Drive completed.


10:18:02 AM  5/11/2007    Executing "drive s1 100"

Driving to the following position: ""

Destination Motor Positions:
motor           position
s1              100.00000

Drive completed.


10:41:54 AM  5/11/2007    Executing "exec hardangles"
                          Derived from "hardangles"


The script "hardangles.py" failed to initialize correctly.  This is most often 
the result of a syntax error in the script or a failure
to import the spice python module.


10:56:02 AM  5/11/2007    Executing "exec hardangles"
                          Derived from "hardangles"


The script "hardangles.py" failed to initialize correctly.  This is most often 
the result of a syntax error in the script or a failure
to import the spice python module.


11:17:53 AM  5/11/2007    Executing "exec hardangles"
                          Derived from "hardangles"


The script "hardangles.py" failed to initialize correctly.  This is most often 
the result of a syntax error in the script or a failure
to import the spice python module.


11:18:27 AM  5/11/2007    Executing "exec hardangles"
                          Derived from "hardangles"


Abort issued!!

11:38:49 AM  5/11/2007    Executing "exec hardangles"
                          Derived from "hardangles"

Traceback (most recent call last):
  File "hardangles.py", line 1, in <module>
    import PySpice
  File "C:\Python25\lib\site-packages\PySpice\__init__.py", line 184, in <module>
    sys.stdout=SpiceStdOut()
  File "C:\Python25\lib\site-packages\PySpice\StdErrOut.py", line 86, in __init__
    self.writevi=self.spice.GetVIReference('WriteToLogfile.vi')
  File "C:\Python25\Lib\site-packages\PySpice\spice_activeX.py", line 430, in GetVIReference
    , password, resvForCall, options)
pywintypes.com_error: (-2147352567, 'Exception occurred.', (5501, 'LabVIEW', 'LabVIEW : LabVIEW:  An input parameter is invalid. For example if the input is a path, the path might contain a character not allowed by the OS such as ? or @.', None, 0, 0), None)

11:39:41 AM  5/11/2007    Executing "exec hardangles"
                          Derived from "hardangles"

Traceback (most recent call last):
  File "hardangles.py", line 3, in <module>
    motors=PySpice.getvar('motornames')
  File "C:\Python25\lib\site-packages\PySpice\__init__.py", line 384, in getvar
    var_return=_getvar(_spice,_variable_dict,varname)
  File "C:\Python25\Lib\site-packages\PySpice\_getvar.py", line 86, in _getvar
    retval=eval(funcname)
  File "<string>", line 1, in <module>
  File "C:\Python25\lib\site-packages\PySpice\varsearch.py", line 56, in _singlevalue
    viref=spiceref.GetVIReference(viname)
  File "C:\Python25\Lib\site-packages\PySpice\spice_activeX.py", line 430, in GetVIReference
    , password, resvForCall, options)
pywintypes.com_error: (-2147352567, 'Exception occurred.', (5501, 'LabVIEW', 'LabVIEW : LabVIEW:  An input parameter is invalid. For example if the input is a path, the path might contain a character not allowed by the OS such as ? or @.', None, 0, 0), None)

11:41:36 AM  5/11/2007    Executing "exec hardangles"
                          Derived from "hardangles"

Traceback (most recent call last):
  File "hardangles.py", line 3, in <module>
    motors=PySpice.getvar('motornames')
  File "C:\Python25\lib\site-packages\PySpice\__init__.py", line 384, in getvar
    var_return=_getvar(_spice,_variable_dict,varname)
  File "C:\Python25\Lib\site-packages\PySpice\_getvar.py", line 86, in _getvar
    retval=eval(funcname)
  File "<string>", line 1, in <module>
  File "C:\Python25\lib\site-packages\PySpice\varsearch.py", line 56, in _singlevalue
    viref=spiceref.GetVIReference(viname)
  File "C:\Python25\Lib\site-packages\PySpice\spice_activeX.py", line 430, in GetVIReference
    , password, resvForCall, options)
pywintypes.com_error: (-2147352567, 'Exception occurred.', (5507, 'LabVIEW', 'LabVIEW : LabVIEW:  File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \\ as path separators on Windows, : on Mac OS, and / on Linux. Verify that the path is correct using the command prompt or file explorer.', None, 0, 0), None)

11:45:36 AM  5/11/2007    Executing "exec hardangles"
                          Derived from "hardangles"

_singlevalue(spiceref,'C:\spice\builds\Spice_Project\Triple_axis_executable\spice_code\motor_globals.vi','Motor Name')
Traceback (most recent call last):
  File "hardangles.py", line 3, in <module>
    motors=PySpice.getvar('motornames')
  File "C:\Python25\lib\site-packages\PySpice\__init__.py", line 384, in getvar
    var_return=_getvar(_spice,_variable_dict,varname)
  File "C:\Python25\lib\site-packages\PySpice\_getvar.py", line 23, in _getvar
    retval=eval(funcname)
  File "<string>", line 1, in <module>
  File "C:\Python25\lib\site-packages\PySpice\varsearch.py", line 56, in _singlevalue
    viref=spiceref.GetVIReference(viname)
  File "C:\Python25\Lib\site-packages\PySpice\spice_activeX.py", line 430, in GetVIReference
    , password, resvForCall, options)
pywintypes.com_error: (-2147352567, 'Exception occurred.', (5507, 'LabVIEW', 'LabVIEW : LabVIEW:  File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \\ as path separators on Windows, : on Mac OS, and / on Linux. Verify that the path is correct using the command prompt or file explorer.', None, 0, 0), None)

11:50:11 AM  5/11/2007    Executing "exec hardangles"
                          Derived from "hardangles"

C:\spiceuilds\Spice_Project\Triple_axis_executable\spice_code\motor_globals.vi
Traceback (most recent call last):
  File "hardangles.py", line 3, in <module>
    motors=PySpice.getvar('motornames')
  File "C:\Python25\lib\site-packages\PySpice\__init__.py", line 384, in getvar
    var_return=_getvar(_spice,_variable_dict,varname)
  File "C:\Python25\Lib\site-packages\PySpice\_getvar.py", line 22, in _getvar
    retval=eval(funcname)
  File "<string>", line 1, in <module>
  File "C:\Python25\lib\site-packages\PySpice\varsearch.py", line 56, in _singlevalue
    viref=spiceref.GetVIReference(viname)
  File "C:\Python25\Lib\site-packages\PySpice\spice_activeX.py", line 430, in GetVIReference
    , password, resvForCall, options)
pywintypes.com_error: (-2147352567, 'Exception occurred.', (5507, 'LabVIEW', 'LabVIEW : LabVIEW:  File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \\ as path separators on Windows, : on Mac OS, and / on Linux. Verify that the path is correct using the command prompt or file explorer.', None, 0, 0), None)

11:52:41 AM  5/11/2007    Executing "exec hardangles"
                          Derived from "hardangles"

C:\spiceuilds\Spice_Project\Triple_axis_executable\spice_code\motor_globals.vi
Traceback (most recent call last):
  File "hardangles.py", line 3, in <module>
    motors=PySpice.getvar('motornames')
  File "C:\Python25\lib\site-packages\PySpice\__init__.py", line 384, in getvar
    var_return=_getvar(_spice,_variable_dict,varname)
  File "C:\Python25\Lib\site-packages\PySpice\_getvar.py", line 22, in _getvar
    retval=eval(funcname)
  File "<string>", line 1, in <module>
  File "C:\Python25\lib\site-packages\PySpice\varsearch.py", line 56, in _singlevalue
    viref=spiceref.GetVIReference(viname)
  File "C:\Python25\Lib\site-packages\PySpice\spice_activeX.py", line 430, in GetVIReference
    , password, resvForCall, options)
pywintypes.com_error: (-2147352567, 'Exception occurred.', (5507, 'LabVIEW', 'LabVIEW : LabVIEW:  File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \\ as path separators on Windows, : on Mac OS, and / on Linux. Verify that the path is correct using the command prompt or file explorer.', None, 0, 0), None)

11:54:59 AM  5/11/2007    Executing "exec hardangles"
                          Derived from "hardangles"

_singlevalue(spiceref,'C:\spice\builds\Spice_Project\Triple_axis_executable\spice_code\motor_globals.vi','Motor Name')
C:\spiceuilds\Spice_Project\Triple_axis_executable\spice_code\motor_globals.vi
Traceback (most recent call last):
  File "hardangles.py", line 3, in <module>
    motors=PySpice.getvar('motornames')
  File "C:\Python25\lib\site-packages\PySpice\__init__.py", line 383, in getvar
    var_return=_getvar(_spice,_variable_dict,varname)
  File "C:\Python25\lib\site-packages\PySpice\_getvar.py", line 23, in _getvar
    retval=eval(funcname)
  File "<string>", line 1, in <module>
  File "C:\Python25\lib\site-packages\PySpice\varsearch.py", line 56, in _singlevalue
    viref=spiceref.GetVIReference(viname)
  File "C:\Python25\Lib\site-packages\PySpice\spice_activeX.py", line 430, in GetVIReference
    , password, resvForCall, options)
pywintypes.com_error: (-2147352567, 'Exception occurred.', (5507, 'LabVIEW', 'LabVIEW : LabVIEW:  File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \\ as path separators on Windows, : on Mac OS, and / on Linux. Verify that the path is correct using the command prompt or file explorer.', None, 0, 0), None)

11:56:03 AM  5/11/2007    Executing "exec hardangles"
                          Derived from "hardangles"

_singlevalue(spiceref,'/C/spice/builds/Spice_Project/Triple_axis_executable/spice_code/motor_globals.vi','Motor Name')
/C/spice/builds/Spice_Project/Triple_axis_executable/spice_code/motor_globals.vi
Traceback (most recent call last):
  File "hardangles.py", line 3, in <module>
    motors=PySpice.getvar('motornames')
  File "C:\Python25\lib\site-packages\PySpice\__init__.py", line 383, in getvar
    var_return=_getvar(_spice,_variable_dict,varname)
  File "C:\Python25\lib\site-packages\PySpice\_getvar.py", line 23, in _getvar
    retval=eval(funcname)
  File "<string>", line 1, in <module>
  File "C:\Python25\lib\site-packages\PySpice\varsearch.py", line 56, in _singlevalue
    viref=spiceref.GetVIReference(viname)
  File "C:\Python25\Lib\site-packages\PySpice\spice_activeX.py", line 430, in GetVIReference
    , password, resvForCall, options)
pywintypes.com_error: (-2147352567, 'Exception occurred.', (5501, 'LabVIEW', 'LabVIEW : LabVIEW:  An input parameter is invalid. For example if the input is a path, the path might contain a character not allowed by the OS such as ? or @.', None, 0, 0), None)

11:57:30 AM  5/11/2007    Executing "exec hardangles"
                          Derived from "hardangles"

_singlevalue(spiceref,'C:\\spice\uilds\\Spice_Project\\Triple_axis_executable\\spice_code\\motor_globals.vi','Motor Name')
C:\spice\uilds\Spice_Project\Triple_axis_executable\spice_code\motor_globals.vi
Traceback (most recent call last):
  File "hardangles.py", line 3, in <module>
    motors=PySpice.getvar('motornames')
  File "C:\Python25\lib\site-packages\PySpice\__init__.py", line 383, in getvar
    var_return=_getvar(_spice,_variable_dict,varname)
  File "C:\Python25\lib\site-packages\PySpice\_getvar.py", line 23, in _getvar
    retval=eval(funcname)
  File "<string>", line 1, in <module>
  File "C:\Python25\lib\site-packages\PySpice\varsearch.py", line 56, in _singlevalue
    viref=spiceref.GetVIReference(viname)
  File "C:\Python25\Lib\site-packages\PySpice\spice_activeX.py", line 430, in GetVIReference
    , password, resvForCall, options)
pywintypes.com_error: (-2147352567, 'Exception occurred.', (5507, 'LabVIEW', 'LabVIEW : LabVIEW:  File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \\ as path separators on Windows, : on Mac OS, and / on Linux. Verify that the path is correct using the command prompt or file explorer.', None, 0, 0), None)

11:58:05 AM  5/11/2007    Executing "exec hardangles"
                          Derived from "hardangles"

_singlevalue(spiceref,'C:\\spice\\/builds\\Spice_Project\\Triple_axis_executable\\spice_code\\motor_globals.vi','Motor Name')
C:\spice\/builds\Spice_Project\Triple_axis_executable\spice_code\motor_globals.vi
Traceback (most recent call last):
  File "hardangles.py", line 3, in <module>
    motors=PySpice.getvar('motornames')
  File "C:\Python25\lib\site-packages\PySpice\__init__.py", line 383, in getvar
    var_return=_getvar(_spice,_variable_dict,varname)
  File "C:\Python25\lib\site-packages\PySpice\_getvar.py", line 23, in _getvar
    retval=eval(funcname)
  File "<string>", line 1, in <module>
  File "C:\Python25\lib\site-packages\PySpice\varsearch.py", line 56, in _singlevalue
    viref=spiceref.GetVIReference(viname)
  File "C:\Python25\Lib\site-packages\PySpice\spice_activeX.py", line 430, in GetVIReference
    , password, resvForCall, options)
pywintypes.com_error: (-2147352567, 'Exception occurred.', (5507, 'LabVIEW', 'LabVIEW : LabVIEW:  File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \\ as path separators on Windows, : on Mac OS, and / on Linux. Verify that the path is correct using the command prompt or file explorer.', None, 0, 0), None)

11:58:40 AM  5/11/2007    Executing "exec hardangles"
                          Derived from "hardangles"

_singlevalue(spiceref,'C:\\spice\\Builds\\Spice_Project\\Triple_axis_executable\\spice_code\\motor_globals.vi','Motor Name')
C:\spice\Builds\Spice_Project\Triple_axis_executable\spice_code\motor_globals.vi
_singlevalue(spiceref,'C:\spice\builds\Spice_Project\Triple_axis_executable\spice_code\motor_globals.vi','Motor Alias')
C:\spiceuilds\Spice_Project\Triple_axis_executable\spice_code\motor_globals.vi
Traceback (most recent call last):
  File "hardangles.py", line 4, in <module>
    motoralias=PySpice.getvar('motoralias')
  File "C:\Python25\lib\site-packages\PySpice\__init__.py", line 383, in getvar
    var_return=_getvar(_spice,_variable_dict,varname)
  File "C:\Python25\lib\site-packages\PySpice\_getvar.py", line 23, in _getvar
    retval=eval(funcname)
  File "<string>", line 1, in <module>
  File "C:\Python25\lib\site-packages\PySpice\varsearch.py", line 56, in _singlevalue
    viref=spiceref.GetVIReference(viname)
  File "C:\Python25\Lib\site-packages\PySpice\spice_activeX.py", line 430, in GetVIReference
    , password, resvForCall, options)
pywintypes.com_error: (-2147352567, 'Exception occurred.', (5507, 'LabVIEW', 'LabVIEW : LabVIEW:  File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \\ as path separators on Windows, : on Mac OS, and / on Linux. Verify that the path is correct using the command prompt or file explorer.', None, 0, 0), None)

11:59:27 AM  5/11/2007    Executing "exec hardangles"
                          Derived from "hardangles"

_singlevalue(spiceref,'C:\spice\Builds\Spice_Project\Triple_axis_executable\spice_code\motor_globals.vi','Motor Name')
C:\spice\Builds\Spice_Project\Triple_axis_executable\spice_code\motor_globals.vi
_singlevalue(spiceref,'C:\spice\Builds\Spice_Project\Triple_axis_executable\spice_code\motor_globals.vi','Motor Alias')
C:\spice\Builds\Spice_Project\Triple_axis_executable\spice_code\motor_globals.vi
_singlevalue(spiceref,'C:\spice\Builds\Spice_Project\Triple_axis_executable\spice_code\motor_globals.vi','Motor Positions')
C:\spice\Builds\Spice_Project\Triple_axis_executable\spice_code\motor_globals.vi
_singlevalue(spiceref,'C:\spice\Builds\Spice_Project\Triple_axis_executable\spice_code\motor_globals.vi','Motor Zeros')
C:\spice\Builds\Spice_Project\Triple_axis_executable\spice_code\motor_globals.vi
  Motor Names   Motor Alias   Soft. Angle          Zero   Hard. Angle
 focal_length  focal_length             0             0             0
           m1            m1       159.413             0       159.413
           m2            m2        41.166      0.120505       41.2865
           m3          marc      0.002842             0      0.002842
           m4        mtrans     -0.001192             0     -0.001192
           m5        mfocus      0.046944             0      0.046944
           s1            s1       99.9994             5       104.999
           s2            s2       36.7185     -0.811128       35.9073
           s3           sgl      0.000422        -0.301     -0.300578
           s4           sgu     -0.000249           0.6      0.599751
           s5           stl             0             0             0
           s6           stu      6.3e-005            15       15.0001
           a1            a1       159.416      -105.103       54.3138
           a2            a2      -41.1683      0.546567      -40.6218
           p1             q       1.67782             0       1.67782
           p2             h     -0.601148             0     -0.601148
           p3             k  3.19432e-006             0  3.19432e-006
           p4             l     -0.591926             0     -0.591926
           p5            ei       14.7001             0       14.7001
           p6            ef       14.6986             0       14.6986
           p7             e    0.00157259             0    0.00157259


 Motor information completed.

12:00:52 PM  5/11/2007    Executing "exec hardangles"
                          Derived from "hardangles"

C:\spice\Builds\Spice_Project\Triple_axis_executable\spice_code\motor_globals.vi
C:\spice\Builds\Spice_Project\Triple_axis_executable\spice_code\motor_globals.vi
C:\spice\Builds\Spice_Project\Triple_axis_executable\spice_code\motor_globals.vi
C:\spice\Builds\Spice_Project\Triple_axis_executable\spice_code\motor_globals.vi
  Motor Names   Motor Alias   Soft. Angle          Zero   Hard. Angle
 focal_length  focal_length             0             0             0
           m1            m1       159.413             0       159.413
           m2            m2        41.166      0.120505       41.2865
           m3          marc      0.002842             0      0.002842
           m4        mtrans     -0.001192             0     -0.001192
           m5        mfocus      0.046944             0      0.046944
           s1            s1       99.9994             5       104.999
           s2            s2       36.7185     -0.811128       35.9073
           s3           sgl      0.000422        -0.301     -0.300578
           s4           sgu     -0.000249           0.6      0.599751
           s5           stl             0             0             0
           s6           stu      6.3e-005            15       15.0001
           a1            a1       159.416      -105.103       54.3138
           a2            a2      -41.1683      0.546567      -40.6218
           p1             q       1.67782             0       1.67782
           p2             h     -0.601148             0     -0.601148
           p3             k  3.19432e-006             0  3.19432e-006
           p4             l     -0.591926             0     -0.591926
           p5            ei       14.7001             0       14.7001
           p6            ef       14.6986             0       14.6986
           p7             e    0.00157259             0    0.00157259


 Motor information completed.

12:02:22 PM  5/11/2007    Executing "exec hardangles"
                          Derived from "hardangles"

  Motor Names   Motor Alias   Soft. Angle          Zero   Hard. Angle
 focal_length  focal_length             0             0             0
           m1            m1       159.413             0       159.413
           m2            m2        41.166      0.120505       41.2865
           m3          marc      0.002842             0      0.002842
           m4        mtrans     -0.001192             0     -0.001192
           m5        mfocus      0.046944             0      0.046944
           s1            s1       99.9994             5       104.999
           s2            s2       36.7185     -0.811128       35.9073
           s3           sgl      0.000422        -0.301     -0.300578
           s4           sgu     -0.000249           0.6      0.599751
           s5           stl             0             0             0
           s6           stu      6.3e-005            15       15.0001
           a1            a1       159.416      -105.103       54.3138
           a2            a2      -41.1683      0.546567      -40.6218
           p1             q       1.67782             0       1.67782
           p2             h     -0.601148             0     -0.601148
           p3             k  3.19432e-006             0  3.19432e-006
           p4             l     -0.591926             0     -0.591926
           p5            ei       14.7001             0       14.7001
           p6            ef       14.6986             0       14.6986
           p7             e    0.00157259             0    0.00157259


 Motor information completed.

1:46:12 PM  5/11/2007    Executing "exec hardangles"
                         Derived from "hardangles"


The script "hardangles.py" failed to initialize correctly.  This is most often 
the result of a syntax error in the script or a failure
to import the spice python module.


1:47:06 PM  5/11/2007    Executing "exec hardangles"
                         Derived from "hardangles"

  Motor Names   Motor Alias   Soft. Angle          Zero   Hard. Angle
 focal_length  focal_length             0             0             0
           m1            m1       159.413             0       159.413
           m2            m2        41.166      0.120505       41.2865
           m3          marc      0.002842             0      0.002842
           m4        mtrans     -0.001192             0     -0.001192
           m5        mfocus      0.046944             0      0.046944
           s1            s1       99.9994             5       104.999
           s2            s2       36.7185     -0.811128       35.9073
           s3           sgl      0.000422        -0.301     -0.300578
           s4           sgu     -0.000249           0.6      0.599751
           s5           stl             0             0             0
           s6           stu      6.3e-005            15       15.0001
           a1            a1       159.416      -105.103       54.3138
           a2            a2      -41.1683      0.546567      -40.6218
           p1             q       1.67782             0       1.67782
           p2             h     -0.601148             0     -0.601148
           p3             k  3.19432e-006             0  3.19432e-006
           p4             l     -0.591926             0     -0.591926
           p5            ei       14.7001             0       14.7001
           p6            ef       14.6986             0       14.6986
           p7             e    0.00157259             0    0.00157259


 Motor information completed.

1:49:50 PM  5/11/2007    Executing "exec hardangles"
                         Derived from "hardangles"


The script "hardangles.py" failed to initialize correctly.  This is most often 
the result of a syntax error in the script or a failure
to import the spice python module.


1:50:13 PM  5/11/2007    Executing "exec hardangles"
                         Derived from "hardangles"


The script "hardangles.py" failed to initialize correctly.  This is most often 
the result of a syntax error in the script or a failure
to import the spice python module.


1:52:58 PM  5/11/2007    Executing "exec hardangles"
                         Derived from "hardangles"

  Motor Names   Motor Alias   Soft. Angle          Zero   Hard. Angle
 focal_length  focal_length             0             0             0
           m1            m1       159.413             0       159.413
           m2            m2        41.166      0.120505       41.2865
           m3          marc      0.002842             0      0.002842
           m4        mtrans     -0.001192             0     -0.001192
           m5        mfocus      0.046944             0      0.046944
           s1            s1       99.9994             5       104.999
           s2            s2       36.7185     -0.811128       35.9073
           s3           sgl      0.000422        -0.301     -0.300578
           s4           sgu     -0.000249           0.6      0.599751
           s5           stl             0             0             0
           s6           stu      6.3e-005            15       15.0001
           a1            a1       159.416      -105.103       54.3138
           a2            a2      -41.1683      0.546567      -40.6218
           p1             q       1.67782             0       1.67782
           p2             h     -0.601148             0     -0.601148
           p3             k  3.19432e-006             0  3.19432e-006
           p4             l     -0.591926             0     -0.591926
           p5            ei       14.7001             0       14.7001
           p6            ef       14.6986             0       14.6986
           p7             e    0.00157259             0    0.00157259


 Motor information completed.

1:54:56 PM  5/11/2007    Executing "exec hardangles"
                         Derived from "hardangles"


The script "hardangles.py" failed to initialize correctly.  This is most often 
the result of a syntax error in the script or a failure
to import the spice python module.


1:55:58 PM  5/11/2007    Executing "exec hardangles"
                         Derived from "hardangles"

  Motor Names   Motor Alias   Soft. Angle          Zero   Hard. Angle
 focal_length  focal_length             0             0             0
           m1            m1       159.413             0       159.413
           m2            m2        41.166      0.120505       41.2865
           m3          marc      0.002842             0      0.002842
           m4        mtrans     -0.001192             0     -0.001192
           m5        mfocus      0.046944             0      0.046944
           s1            s1       99.9994             5       104.999
           s2            s2       36.7185     -0.811128       35.9073
           s3           sgl      0.000422        -0.301     -0.300578
           s4           sgu     -0.000249           0.6      0.599751
           s5           stl             0             0             0
           s6           stu      6.3e-005            15       15.0001
           a1            a1       159.416      -105.103       54.3138
           a2            a2      -41.1683      0.546567      -40.6218
           p1             q       1.67782             0       1.67782
           p2             h     -0.601148             0     -0.601148
           p3             k  3.19432e-006             0  3.19432e-006
           p4             l     -0.591926             0     -0.591926
           p5            ei       14.7001             0       14.7001
           p6            ef       14.6986             0       14.6986
           p7             e    0.00157259             0    0.00157259


 Motor information completed.

1:57:49 PM  5/11/2007    Executing "exec hardangles"
                         Derived from "hardangles"

Traceback (most recent call last):
  File "hardangles.py", line 3, in <module>
    motors=PySpice.getvar('motornames')
  File "C:\Python25\lib\site-packages\PySpice\__init__.py", line 383, in getvar
    var_return=_getvar(_spice,_variable_dict,varname)
  File "C:\Python25\lib\site-packages\PySpice\_getvar.py", line 22, in _getvar
    retval=eval(funcname)
  File "<string>", line 1, in <module>
  File "C:\Python25\lib\site-packages\PySpice\varsearch.py", line 52, in _singlevalue
    viref=spiceref.GetVIReference(viname)
  File "C:\Python25\Lib\site-packages\PySpice\spice_activeX.py", line 430, in GetVIReference
    , password, resvForCall, options)
pywintypes.com_error: (-2147352567, 'Exception occurred.', (5507, 'LabVIEW', 'LabVIEW : LabVIEW:  File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \\ as path separators on Windows, : on Mac OS, and / on Linux. Verify that the path is correct using the command prompt or file explorer.', None, 0, 0), None)

1:58:28 PM  5/11/2007    Executing "exec hardangles"
                         Derived from "hardangles"

Traceback (most recent call last):
  File "hardangles.py", line 3, in <module>
    motors=PySpice.getvar('motornames')
  File "C:\Python25\lib\site-packages\PySpice\__init__.py", line 383, in getvar
    var_return=_getvar(_spice,_variable_dict,varname)
  File "C:\Python25\lib\site-packages\PySpice\_getvar.py", line 22, in _getvar
    retval=eval(funcname)
  File "<string>", line 1, in <module>
  File "C:\Python25\lib\site-packages\PySpice\varsearch.py", line 52, in _singlevalue
    viref=spiceref.GetVIReference(viname)
  File "C:\Python25\Lib\site-packages\PySpice\spice_activeX.py", line 430, in GetVIReference
    , password, resvForCall, options)
pywintypes.com_error: (-2147352567, 'Exception occurred.', (5507, 'LabVIEW', 'LabVIEW : LabVIEW:  File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \\ as path separators on Windows, : on Mac OS, and / on Linux. Verify that the path is correct using the command prompt or file explorer.', None, 0, 0), None)

1:58:45 PM  5/11/2007    Executing "exec hardangles"
                         Derived from "hardangles"

Traceback (most recent call last):
  File "hardangles.py", line 3, in <module>
    motors=PySpice.getvar('motornames')
  File "C:\Python25\lib\site-packages\PySpice\__init__.py", line 383, in getvar
    var_return=_getvar(_spice,_variable_dict,varname)
  File "C:\Python25\lib\site-packages\PySpice\_getvar.py", line 22, in _getvar
    retval=eval(funcname)
  File "<string>", line 1, in <module>
  File "C:\Python25\lib\site-packages\PySpice\varsearch.py", line 52, in _singlevalue
    viref=spiceref.GetVIReference(viname)
  File "C:\Python25\Lib\site-packages\PySpice\spice_activeX.py", line 430, in GetVIReference
    , password, resvForCall, options)
pywintypes.com_error: (-2147352567, 'Exception occurred.', (5501, 'LabVIEW', 'LabVIEW : LabVIEW:  An input parameter is invalid. For example if the input is a path, the path might contain a character not allowed by the OS such as ? or @.', None, 0, 0), None)

2:10:07 PM  5/11/2007    Executing "exec hardangles"
                         Derived from "hardangles"

Traceback (most recent call last):
  File "hardangles.py", line 3, in <module>
    motors=PySpice.getvar('motornames')
  File "C:\Python25\lib\site-packages\PySpice\__init__.py", line 383, in getvar
    var_return=_getvar(_spice,_variable_dict,varname)
  File "C:\Python25\lib\site-packages\PySpice\_getvar.py", line 22, in _getvar
    retval=eval(funcname)
  File "<string>", line 1, in <module>
  File "C:\Python25\lib\site-packages\PySpice\varsearch.py", line 52, in _singlevalue
    viref=spiceref.GetVIReference(viname)
  File "C:\Python25\Lib\site-packages\PySpice\spice_activeX.py", line 430, in GetVIReference
    , password, resvForCall, options)
pywintypes.com_error: (-2147352567, 'Exception occurred.', (5501, 'LabVIEW', 'LabVIEW : LabVIEW:  An input parameter is invalid. For example if the input is a path, the path might contain a character not allowed by the OS such as ? or @.', None, 0, 0), None)

2:10:42 PM  5/11/2007    Executing "exec hardangles"
                         Derived from "hardangles"

Traceback (most recent call last):
  File "hardangles.py", line 3, in <module>
    motors=PySpice.getvar('motornames')
  File "C:\Python25\lib\site-packages\PySpice\__init__.py", line 383, in getvar
    var_return=_getvar(_spice,_variable_dict,varname)
  File "C:\Python25\lib\site-packages\PySpice\_getvar.py", line 22, in _getvar
    retval=eval(funcname)
  File "<string>", line 1, in <module>
  File "C:\Python25\lib\site-packages\PySpice\varsearch.py", line 52, in _singlevalue
    viref=spiceref.GetVIReference(viname)
  File "C:\Python25\Lib\site-packages\PySpice\spice_activeX.py", line 430, in GetVIReference
    , password, resvForCall, options)
pywintypes.com_error: (-2147352567, 'Exception occurred.', (5501, 'LabVIEW', 'LabVIEW : LabVIEW:  An input parameter is invalid. For example if the input is a path, the path might contain a character not allowed by the OS such as ? or @.', None, 0, 0), None)

2:15:36 PM  5/11/2007    Executing "exec hardangles"
                         Derived from "hardangles"

  Motor Names   Motor Alias   Soft. Angle          Zero   Hard. Angle
 focal_length  focal_length             0             0             0
           m1            m1       159.413             0       159.413
           m2            m2        41.166      0.120505       41.2865
           m3          marc      0.002842             0      0.002842
           m4        mtrans     -0.001192             0     -0.001192
           m5        mfocus      0.046944             0      0.046944
           s1            s1       99.9994             5       104.999
           s2            s2       36.7185     -0.811128       35.9073
           s3           sgl      0.000422        -0.301     -0.300578
           s4           sgu     -0.000249           0.6      0.599751
           s5           stl             0             0             0
           s6           stu      6.3e-005            15       15.0001
           a1            a1       159.416      -105.103       54.3138
           a2            a2      -41.1683      0.546567      -40.6218
           p1             q       1.67782             0       1.67782
           p2             h     -0.601148             0     -0.601148
           p3             k  3.19432e-006             0  3.19432e-006
           p4             l     -0.591926             0     -0.591926
           p5            ei       14.7001             0       14.7001
           p6            ef       14.6986             0       14.6986
           p7             e    0.00157259             0    0.00157259


 Motor information completed.

2:16:04 PM  5/11/2007    Executing "exec testscript2"
                         Derived from "testscript2"


The script "testscript2.py" failed to initialize correctly.  This is most often 
the result of a syntax error in the script or a failure
to import the spice python module.


2:18:21 PM  5/11/2007    Executing "exec motorinfo"
                         Derived from "motorinfo"

  Motor Names   Motor Alias   Upper Limit   Lower Limit    Motor Zero     Tolerance 
 focal_length  focal_length       -1.#INF       -1.#INF             0             0 
           m1            m1        -258.9        -258.9             0          0.01 
           m2            m2           -80           -80      0.120505         0.005 
           m3          marc         -29.9         -29.9             0         0.005 
           m4        mtrans         -1000         -1000             0         0.005 
           m5        mfocus           -65           -65             0           0.1 
           s1            s1          -210          -210             5         0.002 
           s2            s2          -100          -100     -0.811128         0.005 
           s3           sgl         -19.7         -19.7        -0.301         0.001 
           s4           sgu         -19.9         -19.9           0.6         0.001 
           s5           stl         -12.5         -12.5             0         0.001 
           s6           stu         -12.5         -12.5            15         0.001 
           a1            a1       -285.23       -285.23      -105.103         0.001 
           a2            a2      -93.1198      -93.1198      0.546567          0.01 
           p1             q       -1.#INF       -1.#INF             0             0 
           p2             h       -1.#INF       -1.#INF             0             0 
           p3             k       -1.#INF       -1.#INF             0             0 
           p4             l       -1.#INF       -1.#INF             0             0 
           p5            ei       -1.#INF       -1.#INF             0             0 
           p6            ef       -1.#INF       -1.#INF             0             0 
           p7             e       -1.#INF       -1.#INF             0             0 


 Motor information completed.

2:19:03 PM  5/11/2007    Executing "exec testscript"
                         Derived from "testscript"

Initialized the first script!!

2:19:04 PM  5/11/2007    Executing "wait 10"

2:19:04 PM  5/11/2007    Waiting for 10.0000 (seconds).

2:19:14 PM  5/11/2007    Wait completed.

We are about to start the second script

2:19:14 PM  5/11/2007    Executing "exec testscript2"


The script "testscript2.py" failed to initialize correctly.  This is most often 
the result of a syntax error in the script or a failure
to import the spice python module.


2:20:34 PM  5/11/2007    Executing "exec testscript"
                         Derived from "testscript"

Initialized the first script!!

2:20:35 PM  5/11/2007    Executing "wait 10"

2:20:35 PM  5/11/2007    Waiting for 10.0000 (seconds).

2:20:45 PM  5/11/2007    Wait completed.

We are about to start the second script

2:20:46 PM  5/11/2007    Executing "exec testscript2"

Initialized the second script!!
Traceback (most recent call last):
  File "testscript2.py", line 15, in <module>
    test=bob.getvar('Junk')
NameError: name 'bob' is not defined

2:20:47 PM  5/11/2007    Executing "comment "This is a test""

COMMENT:
This is a test


2:20:47 PM  5/11/2007    Executing "wait 5"
                         Derived from " wait 5"

2:20:47 PM  5/11/2007    Waiting for 5.0000 (seconds).

2:20:52 PM  5/11/2007    Wait completed.

The second script returned - finishing the first script

2:21:00 PM  5/11/2007    Executing "exec testscript"
                         Derived from "testscript"

Initialized the first script!!

2:21:01 PM  5/11/2007    Executing "wait 10"

2:21:01 PM  5/11/2007    Waiting for 10.0000 (seconds).

2:21:11 PM  5/11/2007    Wait completed.

We are about to start the second script

2:21:12 PM  5/11/2007    Executing "exec testscript2"

Initialized the second script!!
Traceback (most recent call last):
  File "testscript2.py", line 15, in <module>
    test=bob.getvar('Junk')
NameError: name 'bob' is not defined

2:21:13 PM  5/11/2007    Executing "comment "This is a test""

COMMENT:
This is a test


2:21:13 PM  5/11/2007    Executing "wait 5"
                         Derived from " wait 5"

2:21:13 PM  5/11/2007    Waiting for 5.0000 (seconds).

2:21:18 PM  5/11/2007    Wait completed.

The second script returned - finishing the first script

2:21:29 PM  5/11/2007    Executing "exec testscript"
                         Derived from "testscript"

Initialized the first script!!

2:21:29 PM  5/11/2007    Executing "wait 10"

2:21:29 PM  5/11/2007    Waiting for 10.0000 (seconds).

2:21:40 PM  5/11/2007    Wait completed.

We are about to start the second script

2:21:40 PM  5/11/2007    Executing "exec testscript2"

Initialized the second script!!
Traceback (most recent call last):
  File "testscript2.py", line 15, in <module>
    test=PySpice.getvar('Junk')
  File "C:\Python25\lib\site-packages\PySpice\__init__.py", line 383, in getvar
    var_return=_getvar(_spice,_variable_dict,varname)
  File "C:\Python25\lib\site-packages\PySpice\_getvar.py", line 26, in _getvar
    return retval
UnboundLocalError: local variable 'retval' referenced before assignment

2:21:41 PM  5/11/2007    Executing "comment "This is a test""

COMMENT:
This is a test


2:21:42 PM  5/11/2007    Executing "wait 5"
                         Derived from " wait 5"

2:21:42 PM  5/11/2007    Waiting for 5.0000 (seconds).

2:21:47 PM  5/11/2007    Wait completed.

The second script returned - finishing the first script

2:22:08 PM  5/11/2007    Executing "exec testscript"
                         Derived from "testscript"

Initialized the first script!!

2:22:09 PM  5/11/2007    Executing "wait 10"

2:22:09 PM  5/11/2007    Waiting for 10.0000 (seconds).

2:22:19 PM  5/11/2007    Wait completed.

We are about to start the second script

2:22:20 PM  5/11/2007    Executing "exec testscript2"

Initialized the second script!!

2:22:20 PM  5/11/2007    Executing "drive s2 -10"

Driving to the following position: ""

Destination Motor Positions:
motor           position
s2              -10.00000

Drive completed.

The position of s2 is -10.000270077
The a lattice parameter is 6.78
Now executing the wait

2:22:27 PM  5/11/2007    Executing "wait 5"

2:22:27 PM  5/11/2007    Waiting for 5.0000 (seconds).

2:22:32 PM  5/11/2007    Wait completed.

Wait completed
Second Script Finished

2:22:33 PM  5/11/2007    Executing "comment "This is a test""

COMMENT:
This is a test


2:22:33 PM  5/11/2007    Executing "wait 5"
                         Derived from " wait 5"

2:22:33 PM  5/11/2007    Waiting for 5.0000 (seconds).

2:22:38 PM  5/11/2007    Wait completed.

The second script returned - finishing the first script

2:23:05 PM  5/11/2007    Executing "exec testscript"
                         Derived from "testscript"

Initialized the first script!!

2:23:06 PM  5/11/2007    Executing "wait 10"

2:23:06 PM  5/11/2007    Waiting for 10.0000 (seconds).

2:23:16 PM  5/11/2007    Wait completed.

We are about to start the second script

2:23:17 PM  5/11/2007    Executing "exec testscript2"
                         Derived from "testscript2"

Initialized the second script!!

2:23:18 PM  5/11/2007    Executing "drive s2 -10"

Driving to the following position: ""

Destination Motor Positions:
motor           position
s2              -10.00000

Drive completed.

The position of s2 is -9.99748578384
The a lattice parameter is 6.78
Now executing the wait

2:23:19 PM  5/11/2007    Executing "wait 5"

2:23:19 PM  5/11/2007    Waiting for 5.0000 (seconds).

2:23:24 PM  5/11/2007    Wait completed.

Wait completed
Second Script Finished

2:23:25 PM  5/11/2007    Executing "comment "This is a test""

COMMENT:
This is a test


2:23:25 PM  5/11/2007    Executing "wait 5"
                         Derived from " wait 5"

2:23:25 PM  5/11/2007    Waiting for 5.0000 (seconds).

2:23:30 PM  5/11/2007    Wait completed.

The second script returned - finishing the first script

2:25:03 PM  5/11/2007    Executing "exec testscript"
                         Derived from "testscript"

Initialized the first script!!

2:25:03 PM  5/11/2007    Executing "wait 10"

2:25:03 PM  5/11/2007    Waiting for 10.0000 (seconds).

2:25:13 PM  5/11/2007    Wait completed.

We are about to start the second script

2:25:14 PM  5/11/2007    Executing "exec testscript2"
                         Derived from "testscript2"

Initialized the second script!!

2:25:21 PM  5/11/2007    Executing "drive s2 -10"

Driving to the following position: ""

Destination Motor Positions:
motor           position
s2              -10.00000

Drive completed.

The position of s2 is -10.0030401833
The a lattice parameter is 6.78
Now executing the wait

2:25:22 PM  5/11/2007    Executing "wait 5"

2:25:22 PM  5/11/2007    Waiting for 5.0000 (seconds).

2:25:27 PM  5/11/2007    Wait completed.

Wait completed
Second Script Finished

2:25:28 PM  5/11/2007    Executing "comment "This is a test""

COMMENT:
This is a test


2:25:28 PM  5/11/2007    Executing "wait 5"
                         Derived from " wait 5"

2:25:28 PM  5/11/2007    Waiting for 5.0000 (seconds).

2:25:34 PM  5/11/2007    Wait completed.

The second script returned - finishing the first script

2:26:04 PM  5/11/2007    Executing "exec testscript"
                         Derived from "testscript"

Initialized the first script!!

2:26:05 PM  5/11/2007    Executing "wait 10"

2:26:05 PM  5/11/2007    Waiting for 10.0000 (seconds).

2:26:15 PM  5/11/2007    Wait completed.

We are about to start the second script

2:26:18 PM  5/11/2007    Executing "exec testscript2"
                         Derived from "testscript2"

Initialized the second script!!

2:26:21 PM  5/11/2007    Executing "drive s2 -10"

Driving to the following position: ""

Destination Motor Positions:
motor           position
s2              -10.00000

Drive completed.

The position of s2 is -10.0004492357
The a lattice parameter is 6.78
Now executing the wait

2:26:22 PM  5/11/2007    Executing "wait 5"

2:26:22 PM  5/11/2007    Waiting for 5.0000 (seconds).

2:26:27 PM  5/11/2007    Wait completed.

Wait completed
Second Script Finished

2:26:28 PM  5/11/2007    Executing "comment "This is a test""

COMMENT:
This is a test


2:26:28 PM  5/11/2007    Executing "wait 5"
                         Derived from " wait 5"

2:26:28 PM  5/11/2007    Waiting for 5.0000 (seconds).

2:26:33 PM  5/11/2007    Wait completed.

The second script returned - finishing the first script

2:27:44 PM  5/11/2007    Executing "exec testscript"
                         Derived from "testscript"

Initialized the first script!!
The lower limit of s2 is -100.0

2:27:44 PM  5/11/2007    Executing "wait 10"

2:27:44 PM  5/11/2007    Waiting for 10.0000 (seconds).

2:27:54 PM  5/11/2007    Wait completed.

We are about to start the second script

2:27:57 PM  5/11/2007    Executing "exec testscript2"
                         Derived from "testscript2"

Initialized the second script!!

2:27:59 PM  5/11/2007    Executing "drive s2 -10"

Driving to the following position: ""

Destination Motor Positions:
motor           position
s2              -10.00000

Drive completed.

The position of s2 is -9.99583057356
The a lattice parameter is 6.78
Now executing the wait

2:28:00 PM  5/11/2007    Executing "wait 5"

2:28:00 PM  5/11/2007    Waiting for 5.0000 (seconds).

2:28:06 PM  5/11/2007    Wait completed.

Wait completed
Second Script Finished

2:28:07 PM  5/11/2007    Executing "comment "This is a test""

COMMENT:
This is a test


2:28:07 PM  5/11/2007    Executing "wait 5"
                         Derived from " wait 5"

2:28:07 PM  5/11/2007    Waiting for 5.0000 (seconds).

2:28:12 PM  5/11/2007    Wait completed.

The second script returned - finishing the first script

2:28:23 PM  5/11/2007    Executing "exec testscript"
                         Derived from "testscript"

Initialized the first script!!
The lower limit of s2 is -100.0
Traceback (most recent call last):
  File "testscript.py", line 16, in <module>
    s2ulimit=PySpice.upperlimit('s2')
  File "C:\Python25\lib\site-packages\PySpice\__init__.py", line 333, in upperlimit
    ulimit=_upperlimit(_spice,motor)
  File "C:\Python25\Lib\site-packages\PySpice\_upperlimit.py", line 6, in _upperlimit
    motorglobal=spiceref.GetVIReference('motor_globals.vi')
  File "C:\Python25\Lib\site-packages\PySpice\spice_activeX.py", line 430, in GetVIReference
    , password, resvForCall, options)
pywintypes.com_error: (-2147352567, 'Exception occurred.', (5501, 'LabVIEW', 'LabVIEW : LabVIEW:  An input parameter is invalid. For example if the input is a path, the path might contain a character not allowed by the OS such as ? or @.', None, 0, 0), None)

2:29:06 PM  5/11/2007    Executing "exec testscript"
                         Derived from "testscript"

Initialized the first script!!
The lower limit of s2 is -100.0
The upper limit of s2 is 116.387043

2:29:06 PM  5/11/2007    Executing "wait 10"

2:29:06 PM  5/11/2007    Waiting for 10.0000 (seconds).

2:29:17 PM  5/11/2007    Wait completed.

We are about to start the second script

2:29:19 PM  5/11/2007    Executing "exec testscript2"
                         Derived from "testscript2"

Initialized the second script!!

2:29:22 PM  5/11/2007    Executing "drive s2 -10"

Driving to the following position: ""

Destination Motor Positions:
motor           position
s2              -10.00000

Drive completed.

The position of s2 is -9.99562857594
The a lattice parameter is 6.78
Now executing the wait

2:29:23 PM  5/11/2007    Executing "wait 5"

2:29:23 PM  5/11/2007    Waiting for 5.0000 (seconds).

2:29:28 PM  5/11/2007    Wait completed.

Wait completed
Second Script Finished

2:29:29 PM  5/11/2007    Executing "comment "This is a test""

COMMENT:
This is a test


2:29:29 PM  5/11/2007    Executing "wait 5"
                         Derived from " wait 5"

2:29:29 PM  5/11/2007    Waiting for 5.0000 (seconds).

2:29:34 PM  5/11/2007    Wait completed.

The second script returned - finishing the first script

2:48:59 PM  5/11/2007    Executing "exec testscript"
                         Derived from "testscript"

Initialized the first script!!
The lower limit of s2 is -100.0
The upper limit of s2 is 116.387043

2:49:00 PM  5/11/2007    Executing "wait 10"

2:49:00 PM  5/11/2007    Waiting for 10.0000 (seconds).

2:49:10 PM  5/11/2007    Wait completed.

We are about to start the second script

2:49:13 PM  5/11/2007    Executing "exec testscript2"
                         Derived from "testscript2"

Initialized the second script!!

2:49:15 PM  5/11/2007    Executing "drive s2 -10"

Driving to the following position: ""

Destination Motor Positions:
motor           position
s2              -10.00000

Drive completed.

The position of s2 is -9.99637745672
The a lattice parameter is 6.78
Now executing the wait

2:49:16 PM  5/11/2007    Executing "wait 5"

2:49:16 PM  5/11/2007    Waiting for 5.0000 (seconds).

2:49:21 PM  5/11/2007    Wait completed.

Wait completed
Second Script Finished

2:49:22 PM  5/11/2007    Executing "comment "This is a test""

COMMENT:
This is a test


2:49:23 PM  5/11/2007    Executing "wait 5"
                         Derived from " wait 5"

2:49:23 PM  5/11/2007    Waiting for 5.0000 (seconds).

2:49:28 PM  5/11/2007    Wait completed.

The second script returned - finishing the first script

2:49:48 PM  5/11/2007    Executing "comment "Position of s2 is @(s2)""

COMMENT:
Position of s2 is -9.996377


2:49:57 PM  5/11/2007    Executing "comment "Position of s2 is @(s2.upperlimit)""

Error processing: comment "Position of s2 is @(s2.upperlimit)"
Error - the input variable "s2.upperlimit" does not have a valid entry in the variable configuration file AND is not a valid motor name.



2:50:49 PM  5/11/2007    Executing "comment "Position of s2 is @(s2.ulimit)""

Error processing: comment "Position of s2 is @(s2.ulimit)"
Error in reading the global variable "Motor Upper Limit".



2:51:13 PM  5/11/2007    Executing "comment "Position of s2 is @(s2.llimit)""

Error processing: comment "Position of s2 is @(s2.llimit)"
Error in reading the global variable "Motor Lower Limit".



2:51:31 PM  5/11/2007    Executing "comment "Position of s2 is @(s2.zero)""

COMMENT:
Position of s2 is -0.811128


2:52:11 PM  5/11/2007    Executing "comment "Position of s2 is @(s2.llimit)""

COMMENT:
Position of s2 is -100


2:52:13 PM  5/11/2007    Executing "comment "Position of s2 is @(s2.ulimit)""

COMMENT:
Position of s2 is 116.387043


2:53:06 PM  5/11/2007    Executing "comment "Position of s2 is @(s2.status)""

COMMENT:
Position of s2 is 0.000000


2:53:22 PM  5/11/2007    Executing "comment "Position of s2 is @(s2.speed)""

COMMENT:
Position of s2 is fast


2:53:36 PM  5/11/2007    Executing "comment "Position of s2 is @(lastcommand)""

The comment command only takes a single argument in quotes with an optional title.  

Syntax:
comment "This is the comment" [title="This is the title"]

Where the title is optional.

2:54:07 PM  5/11/2007    Executing "comment "Position of s2 is @(lastcommand)""

The comment command only takes a single argument in quotes with an optional title.  

Syntax:
comment "This is the comment" [title="This is the title"]

Where the title is optional.

2:54:26 PM  5/11/2007    Executing "comment "Position of s2 is @(defy)""

Error processing: comment "Position of s2 is @(defy)"
Error in reading the global variable "Def_x_y".



2:54:40 PM  5/11/2007    Executing "comment "Position of s2 is @(numdevices)""

COMMENT:
Position of s2 is 33


3:22:34 PM  5/11/2007    Executing "scan s2 -20 -10 5 preset time 1"


# scan = 38
# date = 5/11/2007
# time = 3:22:34 PM
# experiment = Inelastic neutron scattering from something
# experiment_number = 1
# command = scan s2 -20 -10 5 preset time 1
# builtin_command = scan s2 -20 -10 5 preset time 1
# users = M. Lumsden, L. Robertson, M. Yethiraj
# local_contact = All of us
# scan_title = 
# monochromator = PG002
# analyzer = Pg002
# sense = -+-
# collimation = 48-40-40-120
# samplename = Test crystal
# sampletype = crystal
# samplemosaic = 30.000000
# latticeconstants = 6.780000,6.780000,2.350000,90.000000,90.000000,90.000000
# ubmatrix = -0.130521,0.000001,0.198179,-0.068690,0.000001,-0.376567,-0.000001,-0.147493,-0.000001
# mode = 0
# plane_normal = -0.000007,-0.000006,1.000000
# ubconf = 
# preset_type = normal 
# preset_channel = time
# preset_value = 1.000000
# def_x = s2
# def_y = detector
# col_headers = 
#   Pt.         s2       time    monitor   detector focal_length         m1         m2     mfocus         s1        sgl        sgu        stl        stu         a1         a2          q          h          k          l         ei         ef          e
      1   -20.0011      1.000   4995.000    209.000     0.0000   159.4125    41.1660     0.0469    99.9994     0.0004    -0.0002     0.0000     0.0001   159.4164   -41.1683     0.9250     0.7391     0.0000     0.2326    14.7001    14.6986     0.001
      2   -15.0011      1.000   4870.000    195.000     0.0000   159.4125    41.1660     0.0469    99.9994     0.0004    -0.0002     0.0000     0.0001   159.4164   -41.1683     0.6953     0.5330     0.0000     0.1830    14.7001    14.6986     0.001
      3   -10.0034      1.000   5035.000    164.000     0.0000   159.4125    41.1660     0.0469    99.9994     0.0004    -0.0002     0.0000     0.0001   159.4164   -41.1683     0.4644     0.3403     0.0000     0.1275    14.7001    14.6986     0.001
# Sum of Counts = 568
# Center of Mass = -15.397891+/-0.929224
# Full Width Half-Maximum = 8.063044+/-1.096412
# 3:22:41 PM  5/11/2007   scan completed.

3:24:29 PM  5/11/2007    Executing "scan s2 -20 -10 5 preset time 1"


# scan = 39
# date = 5/11/2007
# time = 3:24:29 PM
# experiment = Inelastic neutron scattering from something
# experiment_number = 1
# command = scan s2 -20 -10 5 preset time 1
# builtin_command = scan s2 -20 -10 5 preset time 1
# users = M. Lumsden, L. Robertson, M. Yethiraj
# local_contact = All of us
# scan_title = 
# monochromator = PG002
# analyzer = Pg002
# sense = -+-
# collimation = 48-40-40-120
# samplename = Test crystal
# sampletype = crystal
# samplemosaic = 30.000000
# latticeconstants = 6.780000,6.780000,2.350000,90.000000,90.000000,90.000000
# ubmatrix = -0.130521,0.000001,0.198179,-0.068690,0.000001,-0.376567,-0.000001,-0.147493,-0.000001
# mode = 0
# plane_normal = -0.000007,-0.000006,1.000000
# ubconf = 
# preset_type = normal 
# preset_channel = time
# preset_value = 1.000000
# def_x = s2
# def_y = detector
# col_headers = 
#   Pt.         s2       time    monitor   detector focal_length         m1         m2     mfocus         s1        sgl        sgu        stl        stu         a1         a2          q          h          k          l         ei         ef          e
      1   -20.0004      1.000   5060.000    205.000     0.0000   159.4125    41.1660     0.0469    99.9994     0.0004    -0.0002     0.0000     0.0001   159.4164   -41.1683     0.9250     0.7390     0.0000     0.2326    14.7001    14.6986     0.001
      2   -14.9970      1.000   5035.000    199.000     0.0000   159.4125    41.1660     0.0469    99.9994     0.0004    -0.0002     0.0000     0.0001   159.4164   -41.1683     0.6952     0.5329     0.0000     0.1830    14.7001    14.6986     0.001
      3   -10.0001      1.000   5167.000    205.000     0.0000   159.4125    41.1660     0.0469    99.9994     0.0004    -0.0002     0.0000     0.0001   159.4164   -41.1683     0.4643     0.3402     0.0000     0.1275    14.7001    14.6986     0.001
# Sum of Counts = 609
# Center of Mass = -14.999188+/-0.875485
# Full Width Half-Maximum = 8.205335+/-1.049155
# 3:24:36 PM  5/11/2007   scan completed.

3:28:31 PM  5/11/2007    Executing "exec testscript"
                         Derived from "testscript"


The script "testscript.py" failed to initialize correctly.  This is most often 
the result of a syntax error in the script or a failure
to import the spice python module.


Abort issued!!

3:33:13 PM  5/11/2007    Executing "exec testscript"
                         Derived from "testscript"


The script "testscript.py" failed to initialize correctly.  This is most often 
the result of a syntax error in the script or a failure
to import the spice python module.


3:34:42 PM  5/11/2007    Executing "exec testscript"
                         Derived from "testscript"


The script "testscript.py" failed to initialize correctly.  This is most often 
the result of a syntax error in the script or a failure
to import the spice python module.


3:38:26 PM  5/11/2007    Executing "exec testscript"
                         Derived from "testscript"


The script "testscript.py" failed to initialize correctly.  This is most often 
the result of a syntax error in the script or a failure
to import the spice python module.


3:38:41 PM  5/11/2007    Executing "exec testscript"
                         Derived from "testscript"


The script "testscript.py" failed to initialize correctly.  This is most often 
the result of a syntax error in the script or a failure
to import the spice python module.


3:39:38 PM  5/11/2007    Executing "exec testscript"
                         Derived from "testscript"


The script "testscript.py" failed to initialize correctly.  This is most often 
the result of a syntax error in the script or a failure
to import the spice python module.


3:41:25 PM  5/11/2007    Executing "exec hardangles"
                         Derived from "hardangles"


The script "hardangles.py" failed to initialize correctly.  This is most often 
the result of a syntax error in the script or a failure
to import the spice python module.


3:42:37 PM  5/11/2007    Executing "exec hardangles"
                         Derived from "hardangles"


The script "hardangles.py" failed to initialize correctly.  This is most often 
the result of a syntax error in the script or a failure
to import the spice python module.


3:47:43 PM  5/11/2007    Executing "exec hardangles"
                         Derived from "hardangles"

  Motor Names   Motor Alias   Soft. Angle          Zero   Hard. Angle
 focal_length  focal_length             0             0             0
           m1            m1       159.413             0       159.413
           m2            m2        41.166      0.120505       41.2865
           m3          marc      0.002842             0      0.002842
           m4        mtrans     -0.001192             0     -0.001192
           m5        mfocus      0.046944             0      0.046944
           s1            s1       99.9994             5       104.999
           s2            s2      -10.0001     -0.811128      -10.8112
           s3           sgl      0.000422        -0.301     -0.300578
           s4           sgu     -0.000249           0.6      0.599751
           s5           stl             0             0             0
           s6           stu      6.3e-005            15       15.0001
           a1            a1       159.416      -105.103       54.3138
           a2            a2      -41.1683      0.546567      -40.6218
           p1             q      0.464269             0      0.464269
           p2             h      0.340218             0      0.340218
           p3             k -8.34834e-007             0 -8.34834e-007
           p4             l      0.127461             0      0.127461
           p5            ei       14.7001             0       14.7001
           p6            ef       14.6986             0       14.6986
           p7             e    0.00157259             0    0.00157259


 Motor information completed.

3:47:48 PM  5/11/2007    Executing "exec testscript"
                         Derived from "testscript"

Initialized the first script!!
The lower limit of s2 is -100.0
The upper limit of s2 is 116.387043

3:47:49 PM  5/11/2007    Executing "wait 10"

3:47:49 PM  5/11/2007    Waiting for 10.0000 (seconds).

3:47:59 PM  5/11/2007    Wait completed.

We are about to start the second script

3:48:02 PM  5/11/2007    Executing "exec testscript2"
                         Derived from "testscript2"

Initialized the second script!!

3:48:04 PM  5/11/2007    Executing "drive s2 -10"

Driving to the following position: ""

Destination Motor Positions:
motor           position
s2              -10.00000

Drive completed.

The position of s2 is -10.0023880161
The a lattice parameter is 6.78
Now executing the wait

3:48:05 PM  5/11/2007    Executing "wait 5"

3:48:05 PM  5/11/2007    Waiting for 5.0000 (seconds).

3:48:10 PM  5/11/2007    Wait completed.

Wait completed
Second Script Finished

3:48:12 PM  5/11/2007    Executing "comment "This is a test""

COMMENT:
This is a test


3:48:12 PM  5/11/2007    Executing "wait 5"
                         Derived from " wait 5"

3:48:12 PM  5/11/2007    Waiting for 5.0000 (seconds).

3:48:17 PM  5/11/2007    Wait completed.

The second script returned - finishing the first script

3:49:40 PM  5/11/2007    Executing "exec hardangles"
                         Derived from "hardangles"

  Motor Names   Motor Alias   Soft. Angle          Zero   Hard. Angle
 focal_length  focal_length             0             0             0
           m1            m1       159.413             0       159.413
           m2            m2        41.166      0.120505       41.2865
           m3          marc      0.002842             0      0.002842
           m4        mtrans     -0.001192             0     -0.001192
           m5        mfocus      0.046944             0      0.046944
           s1            s1       99.9994             5       104.999
           s2            s2      -10.0024     -0.811128      -10.8135
           s3           sgl      0.000422        -0.301     -0.300578
           s4           sgu     -0.000249           0.6      0.599751
           s5           stl             0             0             0
           s6           stu      6.3e-005            15       15.0001
           a1            a1       159.416      -105.103       54.3138
           a2            a2      -41.1683      0.546567      -40.6218
           p1             q      0.464377             0      0.464377
           p2             h      0.340304             0      0.340304
           p3             k -8.35021e-007             0 -8.35021e-007
           p4             l      0.127488             0      0.127488
           p5            ei       14.7001             0       14.7001
           p6            ef       14.6986             0       14.6986
           p7             e    0.00157259             0    0.00157259


 Motor information completed.

3:51:18 PM  5/11/2007    Executing "exec testscript"
                         Derived from "testscript"

Initialized the first script!!
The lower limit of s2 is -100.0
The upper limit of s2 is 116.387043

3:51:19 PM  5/11/2007    Executing "wait 10"

3:51:19 PM  5/11/2007    Waiting for 10.0000 (seconds).

3:51:30 PM  5/11/2007    Wait completed.

We are about to start the second script

3:51:32 PM  5/11/2007    Executing "exec testscript2"
                         Derived from "testscript2"

Initialized the second script!!

3:51:35 PM  5/11/2007    Executing "drive s2 -10"

Driving to the following position: ""

Destination Motor Positions:
motor           position
s2              -10.00000

Drive completed.

The position of s2 is -9.99847444668
The a lattice parameter is 6.78
Now executing the wait

3:51:36 PM  5/11/2007    Executing "wait 5"

3:51:36 PM  5/11/2007    Waiting for 5.0000 (seconds).

3:51:41 PM  5/11/2007    Wait completed.

Wait completed
Second Script Finished

3:51:42 PM  5/11/2007    Executing "comment "This is a test""

COMMENT:
This is a test


3:51:42 PM  5/11/2007    Executing "wait 5"
                         Derived from " wait 5"

3:51:42 PM  5/11/2007    Waiting for 5.0000 (seconds).

3:51:47 PM  5/11/2007    Wait completed.

The second script returned - finishing the first script

10:35:25 AM  5/14/2007    Executing "exec testscript"
                          Derived from "testscript"

Initialized the first script!!
The lower limit of s2 is -100.0
The upper limit of s2 is 116.387043

10:35:27 AM  5/14/2007    Executing "wait 10"

10:35:27 AM  5/14/2007    Waiting for 10.0000 (seconds).

10:35:38 AM  5/14/2007    Wait completed.

We are about to start the second script

10:35:42 AM  5/14/2007    Executing "exec testscript2"
                          Derived from "testscript2"

Initialized the second script!!

10:35:44 AM  5/14/2007    Executing "drive s2 -10"

Driving to the following position: ""

Destination Motor Positions:
motor           position
s2              -10.00000

Drive completed.

The position of s2 is -10.0018736532
The a lattice parameter is 6.78
Now executing the wait

10:35:45 AM  5/14/2007    Executing "wait 5"

10:35:45 AM  5/14/2007    Waiting for 5.0000 (seconds).

10:35:51 AM  5/14/2007    Wait completed.

Wait completed
Second Script Finished

10:35:52 AM  5/14/2007    Executing "comment "This is a test""

COMMENT:
This is a test


10:35:52 AM  5/14/2007    Executing "wait 5"
                          Derived from " wait 5"

10:35:52 AM  5/14/2007    Waiting for 5.0000 (seconds).

10:35:57 AM  5/14/2007    Wait completed.

The second script returned - finishing the first script

3:49:45 PM  5/14/2007    Executing "begin"

The "begin" new experiment command was cancelled.


5:16:09 PM  5/14/2007    Executing "begin"

The "begin" new experiment command was cancelled.


5:30:29 PM  5/14/2007    Executing "begin"

The "begin" new experiment command was cancelled.


5:30:35 PM  5/14/2007    Executing "begin"


5:05:25 PM  5/23/2007    Executing "webcontrol"


The web control username and password were successfully changed.


5:06:52 PM  5/23/2007    Executing "comment "Waiting 1 seconds""

COMMENT:
Waiting 1 seconds


5:06:52 PM  5/23/2007    Executing "wait 1"

5:06:52 PM  5/23/2007    Waiting for 1.0000 (seconds).

5:06:53 PM  5/23/2007    Wait completed.


5:06:53 PM  5/23/2007    Executing "comment "Waiting 2 seconds""

COMMENT:
Waiting 2 seconds


5:06:54 PM  5/23/2007    Executing "wait 2"

5:06:54 PM  5/23/2007    Waiting for 2.0000 (seconds).

5:06:56 PM  5/23/2007    Wait completed.


5:06:56 PM  5/23/2007    Executing "comment "Waiting 3 seconds""

COMMENT:
Waiting 3 seconds


5:06:56 PM  5/23/2007    Executing "wait 3"

5:06:56 PM  5/23/2007    Waiting for 3.0000 (seconds).

5:06:59 PM  5/23/2007    Wait completed.


5:06:59 PM  5/23/2007    Executing "comment "Waiting 4 seconds""

COMMENT:
Waiting 4 seconds


5:06:59 PM  5/23/2007    Executing "wait 4"

5:06:59 PM  5/23/2007    Waiting for 4.0000 (seconds).

5:07:03 PM  5/23/2007    Wait completed.


5:07:04 PM  5/23/2007    Executing "comment "Waiting 5 seconds""

COMMENT:
Waiting 5 seconds


5:07:04 PM  5/23/2007    Executing "wait 5"

5:07:04 PM  5/23/2007    Waiting for 5.0000 (seconds).

5:07:09 PM  5/23/2007    Wait completed.


5:07:09 PM  5/23/2007    Executing "comment "Waiting 6 seconds""

COMMENT:
Waiting 6 seconds


5:07:09 PM  5/23/2007    Executing "wait 6"

5:07:09 PM  5/23/2007    Waiting for 6.0000 (seconds).

5:07:15 PM  5/23/2007    Wait completed.


5:07:15 PM  5/23/2007    Executing "comment "Waiting 7 seconds""

COMMENT:
Waiting 7 seconds


5:07:16 PM  5/23/2007    Executing "wait 7"

5:07:16 PM  5/23/2007    Waiting for 7.0000 (seconds).

5:07:23 PM  5/23/2007    Wait completed.


5:07:23 PM  5/23/2007    Executing "comment "Waiting 8 seconds""

COMMENT:
Waiting 8 seconds


5:07:23 PM  5/23/2007    Executing "wait 8"

5:07:23 PM  5/23/2007    Waiting for 8.0000 (seconds).

5:07:31 PM  5/23/2007    Wait completed.


5:07:31 PM  5/23/2007    Executing "comment "Waiting 9 seconds""

COMMENT:
Waiting 9 seconds


5:07:31 PM  5/23/2007    Executing "wait 9"

5:07:31 PM  5/23/2007    Waiting for 9.0000 (seconds).

5:07:40 PM  5/23/2007    Wait completed.


5:07:41 PM  5/23/2007    Executing "comment "Waiting 10 seconds""

COMMENT:
Waiting 10 seconds


5:07:41 PM  5/23/2007    Executing "wait 10"

5:07:41 PM  5/23/2007    Waiting for 10.0000 (seconds).

5:07:51 PM  5/23/2007    Wait completed.


5:19:03 PM  5/23/2007    Executing "comment "Testing the scripting interface""

COMMENT:
Testing the scripting interface


5:19:03 PM  5/23/2007    Executing "wait 1"

5:19:03 PM  5/23/2007    Waiting for 1.0000 (seconds).

5:19:04 PM  5/23/2007    Wait completed.


5:19:04 PM  5/23/2007    Executing "wait 2"

5:19:04 PM  5/23/2007    Waiting for 2.0000 (seconds).

5:19:06 PM  5/23/2007    Wait completed.


5:19:06 PM  5/23/2007    Executing "wait 3"

5:19:06 PM  5/23/2007    Waiting for 3.0000 (seconds).

5:19:09 PM  5/23/2007    Wait completed.


5:19:10 PM  5/23/2007    Executing "wait 4"

5:19:10 PM  5/23/2007    Waiting for 4.0000 (seconds).

5:19:10 PM  5/23/2007    Wait completed.


Abort issued!!

5:19:24 PM  5/23/2007    Executing "comment "Testing the scripting interface""

COMMENT:
Testing the scripting interface


5:19:24 PM  5/23/2007    Executing "wait 1"

5:19:24 PM  5/23/2007    Waiting for 1.0000 (seconds).

5:19:25 PM  5/23/2007    Wait completed.


5:19:25 PM  5/23/2007    Executing "wait 2"

5:19:25 PM  5/23/2007    Waiting for 2.0000 (seconds).

5:19:27 PM  5/23/2007    Wait completed.


5:19:27 PM  5/23/2007    Executing "wait 3"

5:19:27 PM  5/23/2007    Waiting for 3.0000 (seconds).

5:19:31 PM  5/23/2007    Wait completed.


5:19:31 PM  5/23/2007    Executing "wait 4"

5:19:31 PM  5/23/2007    Waiting for 4.0000 (seconds).

5:19:35 PM  5/23/2007    Wait completed.


5:19:35 PM  5/23/2007    Executing "wait 5"

5:19:35 PM  5/23/2007    Waiting for 5.0000 (seconds).

5:19:40 PM  5/23/2007    Wait completed.


5:20:56 PM  5/23/2007    Executing "comment "Testing the scripting interface""

COMMENT:
Testing the scripting interface


5:20:56 PM  5/23/2007    Executing "wait 1"

5:20:56 PM  5/23/2007    Waiting for 1.0000 (seconds).

5:20:57 PM  5/23/2007    Wait completed.


5:20:57 PM  5/23/2007    Executing "wait 2"

5:20:57 PM  5/23/2007    Waiting for 2.0000 (seconds).

5:20:59 PM  5/23/2007    Wait completed.


5:20:59 PM  5/23/2007    Executing "wait 3"

5:20:59 PM  5/23/2007    Waiting for 3.0000 (seconds).

5:21:03 PM  5/23/2007    Wait completed.


5:21:03 PM  5/23/2007    Executing "wait 4"

5:21:03 PM  5/23/2007    Waiting for 4.0000 (seconds).

5:21:07 PM  5/23/2007    Wait completed.


5:21:07 PM  5/23/2007    Executing "wait 5"

5:21:07 PM  5/23/2007    Waiting for 5.0000 (seconds).

5:21:12 PM  5/23/2007    Wait completed.


5:21:12 PM  5/23/2007    Executing "wait 6"

5:21:12 PM  5/23/2007    Waiting for 6.0000 (seconds).

5:21:18 PM  5/23/2007    Wait completed.


5:21:18 PM  5/23/2007    Executing "wait 7"

5:21:18 PM  5/23/2007    Waiting for 7.0000 (seconds).

5:21:25 PM  5/23/2007    Wait completed.


5:21:26 PM  5/23/2007    Executing "wait 8"

5:21:26 PM  5/23/2007    Waiting for 8.0000 (seconds).

5:21:34 PM  5/23/2007    Wait completed.


5:21:34 PM  5/23/2007    Executing "wait 9"

5:21:34 PM  5/23/2007    Waiting for 9.0000 (seconds).

5:21:43 PM  5/23/2007    Wait completed.


5:21:43 PM  5/23/2007    Executing "wait 10"

5:21:43 PM  5/23/2007    Waiting for 10.0000 (seconds).

5:21:48 PM  5/23/2007    Wait completed.


Abort issued!!

5:53:46 PM  5/24/2007    Executing "defxy s1 detector"

Setting Default X and Y to:
X:  s1
Y:  detector


# scan = 40
# date = 5/24/2007
# time = 5:53:46 PM
# proposal = 
# experiment = Inelastic neutron scattering from something
# experiment_number = 1
# command = scanon
# builtin_command = scanon
# users = M. Lumsden, L. Robertson, M. Yethiraj
# local_contact = All of us
# scan_title = 
# monochromator = PG002
# analyzer = Pg002
# sense = -+-
# collimation = 48-40-40-120
# samplename = Test crystal
# sampletype = crystal
# samplemosaic = 30.000000
# latticeconstants = 6.780000,6.780000,2.350000,90.000000,90.000000,90.000000
# ubmatrix = -0.130521,0.000001,0.198179,-0.068690,0.000001,-0.376567,-0.000001,-0.147493,-0.000001
# mode = 0
# plane_normal = -0.000007,-0.000006,1.000000
# ubconf = C:\spice\spice_code_lv_82\Support_Files\User\User_TAS\exp1\UBConf\UB09May2007_40031PM.ini
# def_x = s1
# def_y = detector
# col_headers = 
#   Pt. focal_length         m2     mfocus         s1         s2        sgl        sgu        stl        stu         a1         a2          q          h          k          l         ei         ef          e       time    monitor   detector
      1    31.3682   -18.1996   -74.9202     0.0004    92.9984     0.0002     0.0007     0.0000     0.0001    89.9997     0.0069     8.5894     8.7771    -0.0002     1.0322    72.6384    72.6384     0.000
# Error in wait command.  The argument "%4" was evaluated as a string.
# Syntax of wait:
# wait n
# (waits for n seconds)
# OR
# wait a:b:c
# (waits for a hours, b minutes, and c seconds)
# Sum of Counts = 0
# Center of Mass = NaN+/-NaN
# Full Width Half-Maximum = NaN+/-NaN
# scan completed: 5:53:53 PM 5/24/2007


5:54:19 PM  5/24/2007    Executing "alias scantest "scanontest.macro %1 %2 %3 %4""

Adding alias scantest with definition "scanontest.macro %1 %2 %3 %4" to user alias file.

Number of variables:  4


5:54:50 PM  5/24/2007    Executing "alias scantest "run scanontest.macro %1 %2 %3 %4""

Adding alias scantest with definition "run scanontest.macro %1 %2 %3 %4" to user alias file.

Number of variables:  4


5:55:02 PM  5/24/2007    Executing "run scanontest.macro 10.000000 20.000000 3.000000 1.000000"
                         Derived from "scantest 10 20 3 1"


5:55:02 PM  5/24/2007    Executing "comment "Running macro C:\spice\spice_code_lv_82\Support_Files\User\User_TAS\exp1\Macros\scanontest.macro""

COMMENT:
Running macro C:\spice\spice_code_lv_82\Support_Files\User\User_TAS\exp1\Macros\scanontest.macro


5:55:02 PM  5/24/2007    Executing "defxy s1 detector"

Setting Default X and Y to:
X:  s1
Y:  detector


# scan = 41
# date = 5/24/2007
# time = 5:55:02 PM
# proposal = 
# experiment = Inelastic neutron scattering from something
# experiment_number = 1
# command = scanon
# builtin_command = scanon
# users = M. Lumsden, L. Robertson, M. Yethiraj
# local_contact = All of us
# scan_title = 
# monochromator = PG002
# analyzer = Pg002
# sense = -+-
# collimation = 48-40-40-120
# samplename = Test crystal
# sampletype = crystal
# samplemosaic = 30.000000
# latticeconstants = 6.780000,6.780000,2.350000,90.000000,90.000000,90.000000
# ubmatrix = -0.130521,0.000001,0.198179,-0.068690,0.000001,-0.376567,-0.000001,-0.147493,-0.000001
# mode = 0
# plane_normal = -0.000007,-0.000006,1.000000
# ubconf = C:\spice\spice_code_lv_82\Support_Files\User\User_TAS\exp1\UBConf\UB09May2007_40031PM.ini
# def_x = s1
# def_y = detector
# col_headers = 
#   Pt. focal_length         m2     mfocus         s1         s2        sgl        sgu        stl        stu         a1         a2          q          h          k          l         ei         ef          e       time    monitor   detector
      1    31.3682   -18.1996   -74.9202    10.0008    92.9984     0.0002     0.0007     0.0000     0.0001    89.9997     0.0069     8.5894     9.1609    -0.0001     0.4882    72.6384    72.6384     0.000
      2    31.3682   -18.1996   -74.9202    13.0000    92.9984     0.0002     0.0007     0.0000     0.0001    89.9997     0.0069     8.5894     9.2220    -0.0001     0.3214    72.6384    72.6384     0.000
      3    31.3682   -18.1996   -74.9202    16.0014    92.9984     0.0002     0.0007     0.0000     0.0001    89.9997     0.0069     8.5894     9.2579    -0.0001     0.1536    72.6384    72.6384     0.000
      4    31.3682   -18.1996   -74.9202    19.0019    92.9984     0.0002     0.0007     0.0000     0.0001    89.9997     0.0069     8.5894     9.2684    -0.0001    -0.0146    72.6384    72.6384     0.000
# Sum of Counts = 0
# Center of Mass = NaN+/-NaN
# Full Width Half-Maximum = NaN+/-NaN
# scan completed: 5:55:12 PM 5/24/2007


6:02:49 PM  5/24/2007    Executing "scan s1 -1 1 .1 preset time 1"


# scan = 42
# date = 5/24/2007
# time = 6:02:49 PM
# proposal = 
# experiment = Inelastic neutron scattering from something
# experiment_number = 1
# command = scan s1 -1 1 .1 preset time 1
# builtin_command = scan s1 -1 1 .1 preset time 1
# users = M. Lumsden, L. Robertson, M. Yethiraj
# local_contact = All of us
# scan_title = 
# monochromator = PG002
# analyzer = Pg002
# sense = -+-
# collimation = 48-40-40-120
# samplename = Test crystal
# sampletype = crystal
# samplemosaic = 30.000000
# latticeconstants = 6.780000,6.780000,2.350000,90.000000,90.000000,90.000000
# ubmatrix = -0.130521,0.000001,0.198179,-0.068690,0.000001,-0.376567,-0.000001,-0.147493,-0.000001
# mode = 0
# plane_normal = -0.000007,-0.000006,1.000000
# ubconf = UB09May2007_40031PM.ini
# preset_type = normal 
# preset_channel = time
# preset_value = 1.000000
# def_x = s1
# def_y = detector
# col_headers = 
#   Pt.         s1       time    monitor   detector focal_length         m2     mfocus         s2        sgl        sgu        stl        stu         a1         a2          q          h          k          l         ei         ef          e
      1    -0.9995      1.000   5171.000    226.000    31.3682   -18.1996   -74.9202    92.9984     0.0002     0.0007     0.0000     0.0001    89.9997     0.0069     8.5894     8.7238    -0.0002     1.0851    72.6384    72.6384     0.000
      2    -0.9004      1.000   5146.000    197.000    31.3682   -18.1996   -74.9202    92.9984     0.0002     0.0007     0.0000     0.0001    89.9997     0.0069     8.5894     8.7292    -0.0002     1.0799    72.6384    72.6384     0.000
      3    -0.8010      1.000   4989.000    197.000    31.3682   -18.1996   -74.9202    92.9984     0.0002     0.0007     0.0000     0.0001    89.9997     0.0069     8.5894     8.7346    -0.0002     1.0747    72.6384    72.6384     0.000
      4    -0.6999      1.000   4933.000    210.000    31.3682   -18.1996   -74.9202    92.9984     0.0002     0.0007     0.0000     0.0001    89.9997     0.0069     8.5894     8.7400    -0.0002     1.0693    72.6384    72.6384     0.000
      5    -0.5990      1.000   4917.000    198.000    31.3682   -18.1996   -74.9202    92.9984     0.0002     0.0007     0.0000     0.0001    89.9997     0.0069     8.5894     8.7454    -0.0002     1.0640    72.6384    72.6384     0.000
      6    -0.5004      1.000   5279.000    210.000    31.3682   -18.1996   -74.9202    92.9984     0.0002     0.0007     0.0000     0.0001    89.9997     0.0069     8.5894     8.7507    -0.0002     1.0588    72.6384    72.6384     0.000
      7    -0.3984      1.000   4950.000    204.000    31.3682   -18.1996   -74.9202    92.9984     0.0002     0.0007     0.0000     0.0001    89.9997     0.0069     8.5894     8.7561    -0.0002     1.0534    72.6384    72.6384     0.000
      8    -0.2999      1.000   5035.000    196.000    31.3682   -18.1996   -74.9202    92.9984     0.0002     0.0007     0.0000     0.0001    89.9997     0.0069     8.5894     8.7614    -0.0002     1.0481    72.6384    72.6384     0.000
      9    -0.1983      1.000   4915.000    201.000    31.3682   -18.1996   -74.9202    92.9984     0.0002     0.0007     0.0000     0.0001    89.9997     0.0069     8.5894     8.7667    -0.0002     1.0428    72.6384    72.6384     0.000
     10    -0.1008      1.000   5068.000    190.000    31.3682   -18.1996   -74.9202    92.9984     0.0002     0.0007     0.0000     0.0001    89.9997     0.0069     8.5894     8.7718    -0.0002     1.0376    72.6384    72.6384     0.000
     11    -0.0004      1.000   5187.000    210.000    31.3682   -18.1996   -74.9202    92.9984     0.0002     0.0007     0.0000     0.0001    89.9997     0.0069     8.5894     8.7770    -0.0002     1.0322    72.6384    72.6384     0.000
     12     0.0991      1.000   4975.000    199.000    31.3682   -18.1996   -74.9202    92.9984     0.0002     0.0007     0.0000     0.0001    89.9997     0.0069     8.5894     8.7822    -0.0002     1.0270    72.6384    72.6384     0.000
     13     0.2000      1.000   5313.000    198.000    31.3682   -18.1996   -74.9202    92.9984     0.0002     0.0007     0.0000     0.0001    89.9997     0.0069     8.5894     8.7874    -0.0002     1.0216    72.6384    72.6384     0.000
     14     0.3020      1.000   4955.000    201.000    31.3682   -18.1996   -74.9202    92.9984     0.0002     0.0007     0.0000     0.0001    89.9997     0.0069     8.5894     8.7926    -0.0002     1.0162    72.6384    72.6384     0.000
     15     0.4000      1.000   4961.000    202.000    31.3682   -18.1996   -74.9202    92.9984     0.0002     0.0007     0.0000     0.0001    89.9997     0.0069     8.5894     8.7976    -0.0002     1.0110    72.6384    72.6384     0.000
     16     0.5007      1.000   4953.000    185.000    31.3682   -18.1996   -74.9202    92.9984     0.0002     0.0007     0.0000     0.0001    89.9997     0.0069     8.5894     8.8028    -0.0002     1.0056    72.6384    72.6384     0.000
     17     0.6006      1.000   5076.000    222.000    31.3682   -18.1996   -74.9202    92.9984     0.0002     0.0007     0.0000     0.0001    89.9997     0.0069     8.5894     8.8078    -0.0002     1.0003    72.6384    72.6384     0.000
     18     0.7007      1.000   4983.000    185.000    31.3682   -18.1996   -74.9202    92.9984     0.0002     0.0007     0.0000     0.0001    89.9997     0.0069     8.5894     8.8128    -0.0002     0.9950    72.6384    72.6384     0.000
     19     0.8008      1.000   4992.000    223.000    31.3682   -18.1996   -74.9202    92.9984     0.0002     0.0007     0.0000     0.0001    89.9997     0.0069     8.5894     8.8178    -0.0001     0.9896    72.6384    72.6384     0.000
     20     0.8995      1.000   4994.000    201.000    31.3682   -18.1996   -74.9202    92.9984     0.0002     0.0007     0.0000     0.0001    89.9997     0.0069     8.5894     8.8227    -0.0001     0.9843    72.6384    72.6384     0.000
     21     0.9994      1.000   4883.000    185.000    31.3682   -18.1996   -74.9202    92.9984     0.0002     0.0007     0.0000     0.0001    89.9997     0.0069     8.5894     8.8277    -0.0001     0.9790    72.6384    72.6384     0.000
# Sum of Counts = 4240
# Center of Mass = -0.007121+/-0.009335
# Full Width Half-Maximum = 1.215558+/-0.016103
# 6:03:20 PM  5/24/2007   scan completed.

# scan = 43
# date = 5/24/2007
# time = 6:03:31 PM
# proposal = 
# experiment = Inelastic neutron scattering from something
# experiment_number = 1
# command = scanon
# builtin_command = scanon
# users = M. Lumsden, L. Robertson, M. Yethiraj
# local_contact = All of us
# scan_title = 
# monochromator = PG002
# analyzer = Pg002
# sense = -+-
# collimation = 48-40-40-120
# samplename = Test crystal
# sampletype = crystal
# samplemosaic = 30.000000
# latticeconstants = 6.780000,6.780000,2.350000,90.000000,90.000000,90.000000
# ubmatrix = -0.130521,0.000001,0.198179,-0.068690,0.000001,-0.376567,-0.000001,-0.147493,-0.000001
# mode = 0
# plane_normal = -0.000007,-0.000006,1.000000
# ubconf = C:\spice\spice_code_lv_82\Support_Files\User\User_TAS\exp1\UBConf\UB09May2007_40031PM.ini
# def_x = Pt.
# def_y = detector
# col_headers = 
#   Pt. focal_length         m2     mfocus         s1         s2        sgl        sgu        stl        stu         a1         a2          q          h          k          l         ei         ef          e       time    monitor   detector
      1    31.3682   -18.1996   -74.9202     9.9997    92.9984     0.0002     0.0007     0.0000     0.0001    89.9997     0.0069     8.5894     9.1609    -0.0001     0.4883    72.6384    72.6384     0.000     10.000  50262.000   2087.000
# Sum of Counts = 2087
# Center of Mass = 1.000000+/-0.030957
# Full Width Half-Maximum = 0.000000+/-NaN
# scan completed: 6:04:13 PM 5/24/2007


9:41:13 AM  5/25/2007    Executing "comment "Testing the CGI scripting interface""

COMMENT:
Testing the CGI scripting interface


9:41:13 AM  5/25/2007    Executing "drive s1 0"

Driving to the following position: ""

Destination Motor Positions:
motor           position
s1              0.00000

Drive completed.


9:41:15 AM  5/25/2007    Executing "count preset time 10"

9:41:15 AM  5/25/2007   Executing count command with preset channel "time" and preset value 10.00

         time      monitor     detector
       10.000    49939.000     1900.000

9:41:26 AM  5/25/2007   Count command completed.


10:48:46 AM  5/25/2007    Executing "wait 1"

10:48:46 AM  5/25/2007    Waiting for 1.0000 (seconds).

10:48:47 AM  5/25/2007    Wait completed.


10:48:47 AM  5/25/2007    Executing "wait 2"

10:48:47 AM  5/25/2007    Waiting for 2.0000 (seconds).

10:48:49 AM  5/25/2007    Wait completed.


10:48:49 AM  5/25/2007    Executing "wait 3"

10:48:49 AM  5/25/2007    Waiting for 3.0000 (seconds).

10:48:52 AM  5/25/2007    Wait completed.


10:48:53 AM  5/25/2007    Executing "wait 4"

10:48:53 AM  5/25/2007    Waiting for 4.0000 (seconds).

10:48:57 AM  5/25/2007    Wait completed.


10:48:57 AM  5/25/2007    Executing "wait 5"

10:48:57 AM  5/25/2007    Waiting for 5.0000 (seconds).

10:48:58 AM  5/25/2007    Wait completed.


Abort issued!!

# scan = 44
# date = 7/1/2007
# time = 3:59:29 PM
# proposal = 
# experiment = Inelastic neutron scattering from something
# experiment_number = 1
# command = scanon
# builtin_command = scanon
# users = M. Lumsden, L. Robertson, M. Yethiraj
# local_contact = All of us
# scan_title = 
# monochromator = PG002
# analyzer = Pg002
# sense = -+-
# collimation = 48-40-40-120
# samplename = Test crystal
# sampletype = crystal
# samplemosaic = 30.000000
# latticeconstants = 6.780000,6.780000,2.350000,90.000000,90.000000,90.000000
# ubmatrix = -0.130521,0.000001,0.198179,-0.068690,0.000001,-0.376567,-0.000001,-0.147493,-0.000001
# mode = 0
# plane_normal = -0.000007,-0.000006,1.000000
# ubconf = C:\spice\spice_code_lv_82\Support_Files\User\User_TAS\exp1\UBConf\UB09May2007_40031PM.ini
# def_x = Pt.
# def_y = detector
# col_headers = 
#   Pt. focal_length         m2     mfocus         s1         s2        sgl        sgu        stl        stu         a1         a2          q          h          k          l         ei         ef          e       time    monitor   detector
      1    66.8588   -41.1621   -35.8167    -7.3943    40.7244     0.0011     0.0001     0.0000     0.0001   159.4174   -41.1715     1.8535     2.0001     0.0000     0.0002    14.7028    14.6964     0.006      2.000  10097.000    396.000      2.000  10075.000    447.000
      2    66.7789   -41.1659   -35.8588    -7.3959    40.7184     0.0008    -0.0002     0.0000     0.0001   159.4166   -41.1665     1.8533     1.9998     0.0000     0.0000    14.7002    14.6998     0.000      2.000  10042.000    404.000      2.000  10164.000    387.000
      3    66.9421   -41.1625   -35.7729    -7.3938    40.7253    -0.0000    -0.0007     0.0000     0.0001   159.4160   -41.1641     1.8537     2.0003     0.0000     0.0000    14.7026    14.7014     0.001      2.000  10139.000    376.000      2.000  10065.000    433.000

Abort issued!!

4:00:30 PM  7/1/2007    Executing "help countheaders"

No help available for "countheaders".


4:00:41 PM  7/1/2007    Executing "help countheader"

The countheader command is used to specify the headers for the data/logfiles.
This is only effective in the countfile and scanon structures.
When envoked, each count in the data/logfile will have the specified name 
attached to the input channel name (i.e. detector_name1, etc.)

The syntax for the countheader command is:

    countheader header1 header2 ...

where header1, header2, ... are the headers for the data/logfile.


# scan = 45
# date = 7/1/2007
# time = 4:03:25 PM
# proposal = 
# experiment = Inelastic neutron scattering from something
# experiment_number = 1
# command = scanon
# builtin_command = scanon
# users = M. Lumsden, L. Robertson, M. Yethiraj
# local_contact = All of us
# scan_title = 
# monochromator = PG002
# analyzer = Pg002
# sense = -+-
# collimation = 48-40-40-120
# samplename = Test crystal
# sampletype = crystal
# samplemosaic = 30.000000
# latticeconstants = 6.780000,6.780000,2.350000,90.000000,90.000000,90.000000
# ubmatrix = -0.130521,0.000001,0.198179,-0.068690,0.000001,-0.376567,-0.000001,-0.147493,-0.000001
# mode = 0
# plane_normal = -0.000007,-0.000006,1.000000
# ubconf = C:\spice\spice_code_lv_82\Support_Files\User\User_TAS\exp1\UBConf\UB09May2007_40031PM.ini
# def_x = Pt.
# def_y = detector
# col_headers = 
#   Pt. focal_length         m2     mfocus         s1         s2        sgl        sgu        stl        stu         a1         a2          q          h          k          l         ei         ef          e       time    monitor   detector
      1    66.7118   -41.1638   -35.8943    -7.3956    40.7217     0.0013    -0.0006     0.0000     0.0001   159.4175   -41.1758     1.8533     1.9998     0.0000     0.0003    14.7017    14.6935     0.008      2.000  10006.000    398.000      1.656   8286.000    357.000      2.000   9994.000    441.000      2.000  10115.000    430.000
      2    66.7466   -41.1630   -35.8759    -7.3947    40.7220     0.0001    -0.0011     0.0000     0.0001   159.4163   -41.1611     1.8536     2.0002     0.0000    -0.0001    14.7022    14.7035    -0.001      2.000   9952.000    370.000      2.000  10079.000    402.000
      3    66.9224   -41.1704   -35.7832    -7.3968    40.7206     0.0006     0.0001     0.0000     0.0001   159.4179   -41.1648     1.8533     1.9999     0.0000    -0.0001    14.6971    14.7010    -0.003      2.000   9997.000    385.000      2.000  10103.000    385.000
      4    66.7938   -41.1619   -35.8510    -7.3960    40.7182     0.0007    -0.0005     0.0000     0.0001   159.4169   -41.1633     1.8534     2.0000     0.0000     0.0000    14.7030    14.7020     0.000      2.000   9907.000    414.000      2.000  10212.000    379.000
      5    66.8768   -41.1658   -35.8072    -7.3967    40.7192     0.0012    -0.0005     0.0000     0.0001   159.4161   -41.1658     1.8533     1.9999     0.0000     0.0000    14.7003    14.7003     0.000      2.000  10175.000    452.000      2.000  10002.000    408.000

Abort issued!!

4:04:50 PM  7/1/2007    Executing "countheader l0 l1"

Setting "countheader" to:
1. l0
2. l1


# scan = 46
# date = 7/1/2007
# time = 4:05:09 PM
# proposal = 
# experiment = Inelastic neutron scattering from something
# experiment_number = 1
# command = scanon
# builtin_command = scanon
# users = M. Lumsden, L. Robertson, M. Yethiraj
# local_contact = All of us
# scan_title = 
# monochromator = PG002
# analyzer = Pg002
# sense = -+-
# collimation = 48-40-40-120
# samplename = Test crystal
# sampletype = crystal
# samplemosaic = 30.000000
# latticeconstants = 6.780000,6.780000,2.350000,90.000000,90.000000,90.000000
# ubmatrix = -0.130521,0.000001,0.198179,-0.068690,0.000001,-0.376567,-0.000001,-0.147493,-0.000001
# mode = 0
# plane_normal = -0.000007,-0.000006,1.000000
# ubconf = C:\spice\spice_code_lv_82\Support_Files\User\User_TAS\exp1\UBConf\UB09May2007_40031PM.ini
# def_x = Pt.
# def_y = detector_l0
# col_headers = 
#   Pt. focal_length         m2     mfocus         s1         s2        sgl        sgu        stl        stu         a1         a2          q          h          k          l         ei         ef          e    time_l0 monitor_l0 detector_l0    time_l1 monitor_l1 detector_l1
      1    66.9191   -41.1633   -35.7850    -7.3972    40.7239     0.0005    -0.0003     0.0000     0.0001   159.4161   -41.1636     1.8536     2.0002     0.0000     0.0000    14.7020    14.7018     0.000      2.000  10039.000    401.000      2.000  10155.000    364.000      2.000  10081.000    427.000
# Error in defxy command ... "detector_l0" is not a valid device.
      2    66.6762   -41.1647   -35.9131    -7.3964    40.7223     0.0007    -0.0002     0.0000     0.0001   159.4176   -41.1703     1.8534     1.9999     0.0000     0.0001    14.7010    14.6972     0.003      2.000  10067.000    378.000      2.000  10021.000    421.000
      3    66.7327   -41.1659   -35.8832    -7.3961    40.7200    -0.0001    -0.0001     0.0000     0.0001   159.4159   -41.1723     1.8532     1.9998    -0.0000     0.0001    14.7002    14.6959     0.004      2.000   9959.000    408.000      2.000  10115.000    439.000
      4    66.9636   -41.1693   -35.7616    -7.3955    40.7251     0.0002     0.0001     0.0000     0.0001   159.4170   -41.1612     1.8536     2.0002    -0.0000    -0.0002    14.6979    14.7034    -0.005      2.000  10021.000    387.000      2.000  10149.000    401.000

Abort issued!!

4:06:21 PM  7/1/2007    Executing "countheader l0 l1"

Setting "countheader" to:
1. l0
2. l1


4:06:22 PM  7/1/2007    Executing "defxy m2 detector"

Setting Default X and Y to:
X:  m2
Y:  detector


# scan = 47
# date = 7/1/2007
# time = 4:06:22 PM
# proposal = 
# experiment = Inelastic neutron scattering from something
# experiment_number = 1
# command = scanon
# builtin_command = scanon
# users = M. Lumsden, L. Robertson, M. Yethiraj
# local_contact = All of us
# scan_title = 
# monochromator = PG002
# analyzer = Pg002
# sense = -+-
# collimation = 48-40-40-120
# samplename = Test crystal
# sampletype = crystal
# samplemosaic = 30.000000
# latticeconstants = 6.780000,6.780000,2.350000,90.000000,90.000000,90.000000
# ubmatrix = -0.130521,0.000001,0.198179,-0.068690,0.000001,-0.376567,-0.000001,-0.147493,-0.000001
# mode = 0
# plane_normal = -0.000007,-0.000006,1.000000
# ubconf = C:\spice\spice_code_lv_82\Support_Files\User\User_TAS\exp1\UBConf\UB09May2007_40031PM.ini
# def_x = m2
# def_y = detector_l0
# col_headers = 
#   Pt. focal_length         m2     mfocus         s1         s2        sgl        sgu        stl        stu         a1         a2          q          h          k          l         ei         ef          e    time_l0 monitor_l0 detector_l0    time_l1 monitor_l1 detector_l1
      1    66.9015   -41.1654   -35.7942    -7.3946    40.7226     0.0001    -0.0009     0.0000     0.0001   159.4170   -41.1716     1.8534     1.9999     0.0000     0.0001    14.7006    14.6963     0.004      2.000  10091.000    375.000      2.000  10206.000    385.000      2.000  10116.000    388.000
      2    66.6881   -41.1674   -35.9068    -7.3951    40.7216     0.0005    -0.0002     0.0000     0.0001   159.4169   -41.1675     1.8534     1.9999     0.0000     0.0000    14.6992    14.6991     0.000      2.000  10100.000    394.000      2.000  10036.000    424.000
      3    66.8035   -41.1637   -35.8458    -7.3964    40.7183     0.0006    -0.0005     0.0000     0.0001   159.4170   -41.1760     1.8531     1.9996     0.0000     0.0003    14.7017    14.6933     0.008      2.000  10010.000    425.000      2.000  10149.000    410.000
      4    66.6610   -41.1665   -35.9212    -7.3948    40.7261    -0.0003    -0.0003     0.0000     0.0001   159.4174   -41.1616     1.8537     2.0003    -0.0000    -0.0001    14.6998    14.7031    -0.003      2.000  10161.000    400.000      2.000  10083.000    426.000
      5    66.8513   -41.1677   -35.8207    -7.3966    40.7248     0.0011    -0.0001     0.0000     0.0001   159.4167   -41.1650     1.8536     2.0001     0.0000    -0.0000    14.6990    14.7008    -0.001      2.000  10121.000    406.000      2.000  10123.000    397.000
      6    66.7820   -41.1712   -35.8572    -7.3957    40.7257     0.0006    -0.0002     0.0000     0.0001   159.4168   -41.1636     1.8535     2.0001     0.0000    -0.0001    14.6966    14.7018    -0.005      2.000  10193.000    400.000      2.000  10105.000    392.000

Abort issued!!
Error - the scanoff command cannot be executed as "Scanon" is already set to false.


4:08:36 PM  7/1/2007    Executing "countheader l0 l1"

Setting "countheader" to:
1. l0
2. l1


4:08:36 PM  7/1/2007    Executing "defxy m2 detector"

Setting Default X and Y to:
X:  m2
Y:  detector


# scan = 48
# date = 7/1/2007
# time = 4:08:37 PM
# proposal = 
# experiment = Inelastic neutron scattering from something
# experiment_number = 1
# command = scanon
# builtin_command = scanon
# users = M. Lumsden, L. Robertson, M. Yethiraj
# local_contact = All of us
# scan_title = 
# monochromator = PG002
# analyzer = Pg002
# sense = -+-
# collimation = 48-40-40-120
# samplename = Test crystal
# sampletype = crystal
# samplemosaic = 30.000000
# latticeconstants = 6.780000,6.780000,2.350000,90.000000,90.000000,90.000000
# ubmatrix = -0.130521,0.000001,0.198179,-0.068690,0.000001,-0.376567,-0.000001,-0.147493,-0.000001
# mode = 0
# plane_normal = -0.000007,-0.000006,1.000000
# ubconf = C:\spice\spice_code_lv_82\Support_Files\User\User_TAS\exp1\UBConf\UB09May2007_40031PM.ini
# def_x = m2
# def_y = detector_l0
# col_headers = 
#   Pt. focal_length         m2     mfocus         s1         s2        sgl        sgu        stl        stu         a1         a2          q          h          k          l         ei         ef          e    time_l0 monitor_l0 detector_l0    time_l1 monitor_l1 detector_l1
      1    66.7390   -41.1671   -35.8799    -7.3941    40.7234     0.0013    -0.0001     0.0000     0.0001   159.4171   -41.1692     1.8534     2.0000     0.0000     0.0000    14.6994    14.6980     0.001      2.000  10088.000    373.000      2.000  10344.000    423.000
      2    66.7604   -41.1679   -35.8686    -7.3962    40.7234     0.0007    -0.0006     0.0000     0.0001   159.4166   -41.1710     1.8534     1.9999     0.0000     0.0001    14.6989    14.6968     0.002      2.000   9843.000    378.000      2.000   9942.000    437.000
      3    66.6754   -41.1654   -35.9136    -7.3969    40.7197     0.0003    -0.0008     0.0000     0.0001   159.4168   -41.1706     1.8533     1.9998     0.0000     0.0001    14.7005    14.6970     0.003      2.000  10104.000    411.000      2.000  10162.000    387.000
      4    66.7508   -41.1620   -35.8737    -7.3956    40.7209     0.0004    -0.0001     0.0000     0.0001   159.4174   -41.1583     1.8536     2.0002     0.0000    -0.0001    14.7029    14.7054    -0.002      2.000   9895.000    410.000      2.000  10168.000    421.000
      5    66.9067   -41.1674   -35.7915    -7.3950    40.7237     0.0011     0.0000     0.0000     0.0001   159.4171   -41.1668     1.8535     2.0000     0.0000    -0.0000    14.6992    14.6996    -0.000      2.000  10037.000    405.000      2.000  10146.000    392.000
      6    66.7903   -41.1669   -35.8528    -7.3958    40.7233     0.0001    -0.0004     0.0000     0.0001   159.4177   -41.1632     1.8535     2.0001    -0.0000    -0.0001    14.6996    14.7021    -0.002      2.000  10075.000    399.000      2.000  10114.000    426.000
      7    66.7419   -41.1708   -35.8784    -7.3946    40.7218     0.0003    -0.0005     0.0000     0.0001   159.4167   -41.1727     1.8532     1.9997     0.0000     0.0000    14.6969    14.6956     0.001      2.000   9937.000    430.000      2.000  10046.000    390.000
      8    66.7761   -41.1657   -35.8603    -7.3960    40.7239     0.0000    -0.0003     0.0000     0.0001   159.4167   -41.1699     1.8535     2.0000    -0.0000     0.0001    14.7004    14.6975     0.002      2.000   9878.000    396.000      2.000   9936.000    379.000
      9    66.7352   -41.1662   -35.8819    -7.3964    40.7217     0.0004    -0.0008     0.0000     0.0001   159.4167   -41.1658     1.8534     2.0000     0.0000     0.0000    14.7000    14.7003    -0.000      2.000  10075.000    387.000      2.000   9973.000    411.000
     10    66.8619   -41.1623   -35.8151    -7.3975    40.7210     0.0007    -0.0009     0.0000     0.0001   159.4164   -41.1616     1.8536     2.0001     0.0000     0.0000    14.7027    14.7032    -0.000      2.000  10079.000    401.000      2.000  10048.000    402.000
# Sum of Counts = 3990
# Center of Mass = -41.166177+/-0.921656
# Full Width Half-Maximum = 0.005003+/-0.593064
# scan completed: 4:10:29 PM 7/1/2007

